Yarisworld Archive

808_Yaris with retrofit projectors

27 posts · 19,837 views

808_YarisOriginal postHI · Sep 20, 2009#1
Since brian and peterpoop did the DIY for these projectors, I'll post the pics. I'd like to thank Garm at Microimage for bringing in awesome products! The only problem I had was the alignment for the headlights-When I had the locking nut for the projector in...the headlight cutoff was off. The locking nut was removed and replaced with a rubber washer. I then eyeballed the cutoffs for the headlights by shining them at a wall. I'm guessing that I had this problem because my car is an 09 🤷 ***One tip with baking the headlights, put wood under the headlight so you won't melt the housing*** On to the pics!

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

Picture Update 2/1/10-Audi Style Led Lights: It was hard for me to take a clear shot of my headlight because of the leds' brightness. Enjoy 😛

Picture not included in this copy
Picture not included in this copy

Picture Update 2/23/10-Audi Style Led Lights: Here's a clear picture of the lights.

Picture not included in this copy

UPDATE 7/8/10-More pics

Picture not included in this copy

Picture not included in this copy

Replies 26

PETERPOOPOahu · Sep 20, 2009#2
looking good! nice surprise to see them at the meet today! lol
ezhacker1San Francisco · Sep 21, 2009#3
oooh perfect a 09 MM, could i see some shots further away of the car? Looking good tho.
yarisugiハワイ · Sep 21, 2009#4
More of 808_Yaris' car with projectors can been seen in this thread.
poncesantiago1Guayaquil, Guayas, Ecuador · Sep 21, 2009#5
Hey Bro, i have a yaris sedan 1.5 but i would like to know that making that implement you had problems with the horizontal leven in the retrofit?
I hope do the same for me sedan but the nivelation is my issue.

Best wishes

Santiago Ponce
advocatelocation · Sep 21, 2009#6
The retrofit looks great! I can't wait until I get a pair!
808_YarisThread starterHI · Sep 21, 2009#7
Originally Posted by ezhacker1 ↑
oooh perfect a 09 MM, could i see some shots further away of the car? Looking good tho.
I'll post the more pictures soon!
808_YarisThread starterHI · Sep 22, 2009#8
Originally Posted by poncesantiago1 ↑
Hey Bro, i have a yaris sedan 1.5 but i would like to know that making that implement you had problems with the horizontal leven in the retrofit?
I hope do the same for me sedan but the nivelation is my issue.

Best wishes

Santiago Ponce
horizontal level was off when i put everything on correctly...instead of using the locking washer(i think that what you call it, it's a ring with three prongs that's supposed to lock the headlights into place), i bought a rubber washer at home depot (size is inch and a half) and used that in place of the locking washer. From there, i guided the projectors so the cutoff was level, and tied everything up.
coffiendOmaha, NE · Oct 29, 2009#9
Curious if you had the same issue as Peter with the projector not fitting in the hole and having to dremel it out a bit....

I plan on doing this relatively soon
808_YarisThread starterHI · Oct 29, 2009#10
Originally Posted by coffiend ↑
Curious if you had the same issue as Peter with the projector not fitting in the hole and having to dremel it out a bit....

I plan on doing this relatively soon
Yes i had the same issue as peter. I dremeled the hole out enough to fit the projectors. I'm guessing this goes for all liftbacks, sedans shouldn't be a problem. good luck with your retrofit!
coffiendOmaha, NE · Oct 29, 2009#11
Thanks for the heads up!

Your car looks really nice, man
Red HorseCosta mesa, California · Oct 30, 2009#12
This should be on the DIY
Dj_SloKidFlorida · Dec 1, 2009#13
can u post a pic of the cut off ??
cali yarisCanoga Park, CA · Dec 1, 2009#14
find Brian's thread he has pics of the cutoff, it's very nice
jamal1984Georgia, USA · Dec 1, 2009#15
Originally Posted by cali yaris ↑
find Brian's thread he has pics of the cutoff, it's very nice
Any sales going for this cali yaris? I'm planning to get one for my sedan very soon.
Also will this fit any other car with H4 bulb? like the Versa?

Thank you
minired5stbySan Diego · Dec 3, 2009#16
Nice projectors if only one day I will be brave enough. But I'm suprised you didn't paint the housing black around the headlight.
cali yarisCanoga Park, CA · Dec 3, 2009#17
possible future sale, but not right now. I only have one set left in stock by the way.

Yes, this should fit into any car that uses an H4 bulb. (note that some cars, like the liftback but not the sedan, need to have the hole opened a little)
jamal1984Georgia, USA · Dec 3, 2009#18
Originally Posted by cali yaris ↑
possible future sale, but not right now. I only have one set left in stock by the way.

Yes, this should fit into any car that uses an H4 bulb. (note that some cars, like the liftback but not the sedan, need to have the hole opened a little)
thanks no problem, i can only use the dremel to make it fit. I will possible buy two in the future one for me one for my dad versa.
808_YarisThread starterHI · Dec 3, 2009#19
^yup the dremel tool does come in handy!
808_YarisThread starterHI · Feb 1, 2010#20
picture update!
yarisugiハワイ · Feb 1, 2010#21
Very nice! Goes well with your HIDs. When do they turn on?
Did you have to bake your headlights again?
PETERPOOPOahu · Feb 1, 2010#22
those new LEDS look great in person!
808_YarisThread starterHI · Feb 3, 2010#23
Originally Posted by yarisugi ↑
Very nice! Goes well with your HIDs. When do they turn on?
Did you have to bake your headlights again?
thanks, i tapped into my parking lights. I didn't have to bake
my headlight again for this mod. Just double sided taped the led strips
to the bottom of the headlight.
808_YarisThread starterHI · Feb 27, 2010#24
updated a clearer pic on PAGE 1
808_YarisThread starterHI · Jul 8, 2010#25
bump!
.Kevin.Prince George, BC. Canada · Oct 2, 2010#26
how exactly do you get this done, and I am guessing those walmart strips will not work either haha
808_YarisThread starterHI · Oct 8, 2010#27
^yeah wal-mart strips won't work lol. which part do you want to get done? the led strips or projector?