I have been in contact with Mike at NST and we have talked about some cams for the 1NZ-FE motor. If he is going to persue we need to get a large intrest in them so lets hear it. They would be mild cams for the people that have emission testing and that way there won't be check engine lights on.
GI: Custom Cams
63 posts · 38,477 views · page 1 of 2
Replies 62
I DEFIANTELY WANT IN ON THAT!
IM GOING OVERTHERE TODAY TO GET SOMETHING SO I WANT TO HEAR MORE OF THIS.
Definitely in.
pricing?
i am definitely interested
the cams will need to be compatible with a future turbo set up
i am definitely interested
the cams will need to be compatible with a future turbo set up
Definately in pending cost/horsepower gain.
Since the cost of R&D is so much and the market isn't huge they are probably going to be in a similar range as the other that they offer.
http://www.nonstoptuning.com/pNSTtriflowCams.html
Cams will definately complement mod. So almost anything you add will help it get great more power. So it would be really nice with F/I setups!!
http://www.nonstoptuning.com/pNSTtriflowCams.html
Cams will definately complement mod. So almost anything you add will help it get great more power. So it would be really nice with F/I setups!!
any specs on the lift and durration differnce between our stock and these tri flow cams from nst?
that info will come during the R&D stages
definately in
when are you guys looking to have the money? Are these stage I,II, or III cams?
Not sure yet there still has to be enough intrest. and Mike will probably not take money till the cams are finished
as long as they no over 250 and gives at least 10hp? tht be good gain right?
hey is there any handheld programers for the yaris?
hey is there any handheld programers for the yaris?
Cams for less han $250? 🤣
Add $500 to that and you'll be close
Add $500 to that and you'll be close
from what mike said yesterday that it would be about 600-700 dollar price range if they were to ever be made.
As cool as that sounds, I have to be honest and admit that I wouldn't spend that kind of money for cams. Too bad there aren't enough 1NZ-FE's out there to help defray the cost more.
also, how would these type of cams interact with mods like the 1ZZ TB?
also, how would these type of cams interact with mods like the 1ZZ TB?
$700 for 10hp is a good price. people buy mufflers that produce maybe 2hp for $300-400 so why not spend more on a mod that will actually make a noticeable gain like cams? im all in for cams.
cams and cali's intake mani would make a heck of a difference.
If they make 10 HP and are say $700. Break that down to $70/ 1 HP.
which is well worth it for me. considering toyota heads are very conservative and that would help me with the turbo kit that im fabing up.
+2 , very interested 👍Originally Posted by PHXDEMON ↑Definately in pending cost/horsepower gain.
DEFIANTELY,please count me in.
i would buy them
Anyone else going to call Mike at NST this week and tell him there are about 20 people that are interested through a few forums and I'm not sure that is going to be enough to get the ball rolling but you never know
well, you can't really say that a cost of 700 for 10hp is actually the total cost. you still gotta reset timing and install the things. so, you have to include install in the price range.
also, is there going to be a tune coming with it? if there is, i'd be happy to spend 350 for a tuner program as long as it's plug and play. we've been over this before in another section. thing is, for me, i'd have to be able to hook it up to my puter and change stuff on a whim. but a 93 octane program would be awesome.
realistically, for the cost of install, and cams, this thing better be getting me at least 25 hp, preferably 35 or 40
also, is there going to be a tune coming with it? if there is, i'd be happy to spend 350 for a tuner program as long as it's plug and play. we've been over this before in another section. thing is, for me, i'd have to be able to hook it up to my puter and change stuff on a whim. but a 93 octane program would be awesome.
realistically, for the cost of install, and cams, this thing better be getting me at least 25 hp, preferably 35 or 40
id buy them
Did you miss the part where they are going to be more mild cams? Judging from the other cams NST is selling $700 is a fair price. When you buy any other performance mod do you install it yourself, do you take it somewhere to do it, or des the place you bought it from install it with no extra costs? (I would think anyone buying these knows if they can install them or not) They are going to be mild cams so there wont need to have an additional piggy back and won't throw CEL's. I guess all in all this mod just won't be for some people.Originally Posted by severous01 ↑well, you can't really say that a cost of 700 for 10hp is actually the total cost. you still gotta reset timing and install the things. so, you have to include install in the price range.
also, is there going to be a tune coming with it? if there is, i'd be happy to spend 350 for a tuner program as long as it's plug and play. we've been over this before in another section. thing is, for me, i'd have to be able to hook it up to my puter and change stuff on a whim. but a 93 octane program would be awesome.
realistically, for the cost of install, and cams, this thing better be getting me at least 25 hp, preferably 35 or 40
Wow weren't you and me talking about this on Saturday.Originally Posted by jt258 ↑IM GOING OVERTHERE TODAY TO GET SOMETHING SO I WANT TO HEAR MORE OF THIS.
But yea I in as well might as well spend a little more and start internals on this just like on my 4AGE.
I'm in. Definitely in. Cams in a 'matic Yaris lol
+1 on the cams.
Lil red looks like the this is starting out pretty good. hope we can get mike to do this.
interested but not a purchase i can make anytime soon.
I'd buy them
I would be interested, and I am lol but I happen to know that cams on our vvt-i motors is something that a backyard mechanic shouldn't do. If that makes any sense. speaking of vvt-i I'm pretty sure that any aftermaket cam is gonna confuse it so you would need to tune accordingly. and if this has been addressed then ignore me.
Oh and you guys wanna see some diagrams I have access to that kinda stuff just FYI :)
Oh and you guys wanna see some diagrams I have access to that kinda stuff just FYI :)
yes sir were we were. mr. midon
Our ECU's are self learning/adjusting to a point. I would be willing to to install these without tune and drive around for a few days to see if they would through a CEL.
as long as they were designed to work with our VVT-i and self adjust when the ecu send the signal it shouldn't throw a CEL. ever thing can be made better if they made it work with the stock cam they can make a better one and it will still work if made right.
^^thats true. I just hope that the demand for these will be great enough to make the work worth it. I would love to see some Cams for the 1nz.
thats why we need to rally up enough people to so mike will want to put these cams into production. im pretty sure that we will need more than thirty people to make this work.
we need to bring in some of the scion guys, some one should go on a good will mission to a couple of the scion forums.
I have posted this on Scionlife and on microimageonline fourms and I think all together its at 20 people. The cams that NST sells now for other motors work with VVT-i so that is not a problem. I just don't think this is going to happen unless I win the lottery and donate the money for the R&D
$70 per hp is still not worth it. that's ridiculous.
and i can install all my own parts. it's no prob for me...
i guess im just not used to the expense and 'power gains' of these imports and smaller engines. i guess i should be looking at percentages and not power gains. i did gain 10% power on headers for camaro, and another 10% for cam, but then again, we're talkin 35-40 hp each...seems more worth while.
and i can install all my own parts. it's no prob for me...
i guess im just not used to the expense and 'power gains' of these imports and smaller engines. i guess i should be looking at percentages and not power gains. i did gain 10% power on headers for camaro, and another 10% for cam, but then again, we're talkin 35-40 hp each...seems more worth while.
If we were to get 10hp out of mild cams that is a 10% gain for us so that would be the same right? Stock car with a manual tranny are putting down 90 whp on the dynos but with I/H/E/Pulley some people are spending up to that much and not seeing those kinds of gains.
Count me in too on the list of intrest
Some definite interest from myself as well. On the assumption that they will work equally in a 1NZ-FE Echo motor (no reason why they shouldn't). I would be curious as to whether they free up the top end some more and whether there is any benefit to raising the rev limit from the factory setting. I would also be interested to know whether the ramp angles require heavier valve springs or whether the factory ones suffice up to the factory rev limit.
Buy going off the cams that NST already produces their cams provide gains through out the whole RPM range and are a direct bolt in meaning not extra mods will be nessecary.
Gotcha.👍
I understand that no other mods are needed if the factory rev limit is retained, but then there is the what if question. If the power is still increasing at the factory rev limit, then an increase in rev limit through aftermarket management may provide additional top end power and give you a more flexible engine to work with when changing gears, especially to those of us with the "Economy" final drive ratios in our gearboxes.
I understand that no other mods are needed if the factory rev limit is retained, but then there is the what if question. If the power is still increasing at the factory rev limit, then an increase in rev limit through aftermarket management may provide additional top end power and give you a more flexible engine to work with when changing gears, especially to those of us with the "Economy" final drive ratios in our gearboxes.
Well I know CTscott has found a way to get rid of the speed limiter he may be able to raise the rev limiter but then you will be looking at gettin stiffer valve springs. As far as knowing if they will keep making power at the rev limiter is a long ways away R&D needs to happen before that and there has to be enough intrest to start that. That does not mean stop with the questions I am gathering these to turn over to Mike if there is anything that he wants to add and I know he stops in every once in a while so he would be able to help out too. I might give it one more week to see if anyone else is interested then let him know the count.
Even though these cams are designed to work with the stock computer i would like to know what the intake and exhaust lift and duration of these cams would be.
just curious to know.
just curious to know.
I know that you are but none of this will be figured out until the R&D is started