Yarisworld Archive

Worn out tires - help

6 posts · 3,879 views

caineroadOriginal postToronto · Sep 15, 2009#1
I have a set of near worn out tires at the front L and R. And the rear L and R are almost new. When I turn in a curve at speed, sometimes I can hear squeaking noise. So I did a rotation today, now the new set are at the front and the near worn out set are at the rear.

Is there a problem with that? The car is heavier at the front and is FWD, would a rear skid more likely to happen in terms of the wheel set I have now?

Cheers🙇

Replies 5

supmetSouthern California · Sep 15, 2009#2
You'll be ok(definitely not good, but ok) as long as you don't drive in the rain. I hydroplaned and spun out into a guard rail on the freeway with good front tires and bad rear tires. It was a similar weight FWD corolla that this happened in btw.

Rotate sooner next time. A lot sooner
AlexNet0Rockland, ME · Sep 15, 2009#3
I buy two tires at a time, when the fronts wear out, I move them to the back and put two new ones on the front, i never move worn out tires to the rear.

I know, im not following the rotation pattern.
markitectMichigan · Sep 16, 2009#4
i would get 2 new tires, you should be able to get matching ones pretty cheap, and it's always easier when your paying for 2 tires at a time instead of 4.
caineroadThread starterToronto · Sep 16, 2009#5
Oh... Ok thanks for everyone's input. I'll try not to drive in wet condition :)
PHXDEMONPhoenix, AZ · Sep 17, 2009#6
Originally Posted by AlexNet0 ↑
I buy two tires at a time, when the fronts wear out, I move them to the back and put two new ones on the front, i never move worn out tires to the rear.

I know, im not following the rotation pattern.
That's what I did but mine were worn due to the previous owner dropping it without getting an alignment.