Yarisworld Archive

Weird thing..my left wheel sits in more than the right

34 posts · 18,743 views

ezhacker1Original postSan Francisco · Sep 15, 2009#1
I installed 12mm hub spacers, measured both to be 12mm, thing is after i was all done i noticed that the left wheel sits in more than the right. Guess it wasnt noticeable till the wheels (15 steelies) were spaced out. I made sure that both sides fully bolted closed no gaps or anything. The only thing i have left to test is switching the rear wheels around to see maybe its the wheels offset (iono). So i cant attribute it to the spacers because they are both the same size...

Replies 33

Kaotic LazagnaCentral Valley, CA · Sep 15, 2009#2
Same tire pressure on all corners?
KioshiFremont, CA · Sep 15, 2009#3
PM Tamago, he'll be all over this one......
tk-421Dagobah · Sep 15, 2009#4
I have exactly the same problem. Subscribed.
ezhacker1Thread starterSan Francisco · Sep 15, 2009#5
Originally Posted by Kaotic Lazagna ↑
Same tire pressure on all corners?
Yup i checked that, ill take another look tomorrow. I installed them saturday. If i had to guess the difference in offset, id say probably ~10mm....

Originally Posted by tk-421 ↑
I have exactly the same problem. Subscribed.
Whats your pre/post spacer offset? What do you think the difference in left and right for you?
KioshiFremont, CA · Sep 15, 2009#6
If the problem isn't solved, i may be coming to SFSU to drop off my visitor enrollment paper, so i can come by your place and we can swap wheels to see with my 17s if you are having problems still....?
tk-421Dagobah · Sep 15, 2009#7
Originally Posted by ezhacker1 ↑
Whats your pre/post spacer offset? What do you think the difference in left and right for you?
I have 205/50R15 +38 offset. I would say that the right wheel sticks out by about 3mm more than the left and it rubs like hell when there's passengers in the back.
ezhacker1Thread starterSan Francisco · Sep 15, 2009#8
Originally Posted by Kioshi ↑
If the problem isn't solved, i may be coming to SFSU to drop off my visitor enrollment paper, so i can come by your place and we can swap wheels to see with my 17s if you are having problems still....?
Cool, id love to see some (actual wheels) on my car than steelies. Plus there would be someone else to see what i mean about the differences in offset.

Originally Posted by tk-421 ↑
I have 205/50R15 +38 offset. I would say that the right wheel sticks out by about 3mm more than the left and it rubs like hell when there's passengers in the back.
Maybe 10mm was a bit much, i dont know how to really measure it, there arent really any right angles or anything. But definitely is visible difference.
kimonaHuntington Bch, CA · Sep 15, 2009#9
Acceptable manufacturing tolerances. Pretty normal on our cars to have right to left differences. We covered this issue in a few threads way back when.
tk-421Dagobah · Sep 15, 2009#10
I'm hoping to get my hands on a fender roller soon, or else I'll have to remove the spacer which I really don't want to do...

or perhaps I could get the right-side spacer shaved by a few mm?
1NZYaris1New Zealand · Sep 15, 2009#11
Originally Posted by kimona ↑
Acceptable manufacturing tolerances. Pretty normal on our cars to have right to left differences. We covered this issue in a few threads way back when.
Funny you should say that , i took mine into Toyota ,with the same
thing , and that was there comment .
But they did sort of fix it 😳, by pulling the right rear guard out .
Take your rear wheels off run a tapemeasure from the gaurd lip
to the back of the wheel well . you will find your 3-5mm differance between sides .👍
silver_echoSpokane, WA · Sep 15, 2009#12
so here is an idea... for people that are getting ready to try purchasing the spacers, why not have person measure out before and then have the set include perhaps one 12 and one 9 spacer? just an idea, i don't know about the manufacturing requirements, but it is a thought... if this cannot work, just let me know and i will remove/edit this post...
TamagoOff Grid · Sep 15, 2009#13
all yarii are crooked
ezhacker1Thread starterSan Francisco · Sep 15, 2009#14
Originally Posted by Tamago ↑
all yarii are crooked
wow.. ill measure the difference with wheels off, then go from there. But just plain..wow
TamagoOff Grid · Sep 15, 2009#15
penguin garage (with the help of TK-421) discovered this when we sent out the first few sets of spacers.. if you'd ordered PG spacers instead of knock-offs they would have come with camber shims to prevent rubbing 😁
ezhacker1Thread starterSan Francisco · Sep 15, 2009#16
Originally Posted by Tamago ↑
penguin garage (with the help of TK-421) discovered this when we sent out the first few sets of spacers.. if you'd ordered PG spacers instead of knock-offs they would have come with camber shims to prevent rubbing 😁
my problem isnt rubbing im only on nf210s problem is one is just sits in more than other. Once i get home ill measure the difference to see if i need to purchase another spacer to add on.
TamagoOff Grid · Sep 15, 2009#17
just live with it. the car's crooked to begin with lol
ezhacker1Thread starterSan Francisco · Sep 15, 2009#18
i guess i didnt notice it being crooked before
tk-421Dagobah · Sep 15, 2009#19
Originally Posted by Tamago ↑
if you'd ordered PG spacers instead of knock-offs they would have come with camber shims to prevent rubbing 😁
So I guess I got knockoffs, since I'm sure I didn't get any shims... 🤷
TamagoOff Grid · Sep 15, 2009#20
did you ever ask for any? remember, you actually had the second set of PG spacers in the country, well before the shims were made. you and i have had plenty of discussion on how to fix the problem, you even told me you would look into making the shims locally. why isn't this happening via AIM? 😕
Penguin GarageFL · Sep 15, 2009#21
Originally Posted by tk-421 ↑
So I guess I got knockoffs, since I'm sure I didn't get any shims... 🤷
shoot me a PM.

EDIT: this goes for any of our customers who have bought the spacers and haven't gotten shims yet. Also anyone with other brand spacers can still order our Shims if they need a set. :)
tk-421Dagobah · Sep 15, 2009#22
Originally Posted by Tamago ↑
did you ever ask for any? remember, you actually had the second set of PG spacers in the country, well before the shims were made. you and i have had plenty of discussion on how to fix the problem, you even told me you would look into making the shims locally. why isn't this happening via AIM? 😕
No worries, Joel... Just yankin' your chain. 😆
No need for AIM, we talked about this already and we're good.
tk-421Dagobah · Sep 15, 2009#23
Originally Posted by Penguin Garage ↑
shoot me a PM.
PMing you now. 👍
yarisugiハワイ · Sep 15, 2009#24
PETERPOOP should chime in to this one, too.
tk-421Dagobah · Sep 15, 2009#25
Question: Will having shims on one side screw with my alignment? Should I add the shims to both sides to even it out?
Penguin GarageFL · Sep 15, 2009#26
you'll want camber even on both sides.
tk-421Dagobah · Sep 15, 2009#27
That's what I thought. Thanks! 🙌
marcustoronto, canada · May 19, 2010#28
well is our yarii really crooked on one side...just curious maybe i can order 10mm and 13mm on one side..anyone.
BluYrsTallinn, Estonia · May 19, 2010#29
Seems to be a universal thing. Mine's got the same problem- glad to see I'm not the only one.
spookzSydney, Australia · May 19, 2010#30
Mine is the same, it became more obvious with lower offset rims and spacers installed.. I now run a 10mm and a 5mm spacer.. There is still approximately a 2-3mm difference between sides.. So I probably needed to run a 13mm and a 5mm.. lol
marcustoronto, canada · May 19, 2010#31
i just checked it..it is..the right side sticks out more than the left..wow.got to get me 2 different spacer size..
marcustoronto, canada · May 28, 2010#32
im on to this garm is sending me 2 spacer 1x10mm and 1x13mm. hope i get it sometime next week..
TamagoOff Grid · May 28, 2010#33
crooked yarii are crooked
marcustoronto, canada · Jun 21, 2010#34
confirmed..i did 13mm on left rear and 10mm on right got it to match closer but i believe left rear is 5mm off fr the right.. still rubbing on the right side after a little shaving on the fender work.