Yarisworld Archive

Cleaning rear lens and sealing it back

13 posts · 4,734 views

alvantOriginal postSG · Sep 11, 2009#1
hi guys, i need to remove the sealant on the rear lights, take out the lens and do some cleaning but i'm not sure what type of sealant is suitable to seal the lens back to the housing. some advise will be greatly appreciated.

and btw i'm cutting thru the original sealant, not baking it.

Replies 12

ShroomsterOrlando · Sep 11, 2009#2
please, please please bake it.


just set the oven for about 350 turn it on let it get to temp. then turn it off and place the lens in there about 15 minutes.


the adhesive will be easier to remove also.
BrianRiverside, CA · Sep 11, 2009#3
If you don't bake it you're taking an extremely high chance of cracking the lens.
Bake it at 215 for 5-10 mins. Much easier that cutting.
cali yarisCanoga Park, CA · Sep 11, 2009#4
I think 350 is on the dangerous side, but that's from what I've read, I haven't tried it myself! (PeterPoop got a little melting at a lower temp, for example)
ShroomsterOrlando · Sep 11, 2009#5
i said turn it off and let it sit in the over while cooling from 350
alvantThread starterSG · Sep 12, 2009#6
that's alot of help guys, thanks so much but i ain't got an oven!! haha... really no cutting? wat are the available sealants out there that i can use?
ShroomsterOrlando · Sep 12, 2009#7
all weather silicone clear or black your preference.

if you're going to cut it, you're going to have a hell of a time removing the already installed sealent and you're not going to have a nice seal when you put it back. but who knows you might surprise yourself 😁
yaris-meAnaheim, CA · Sep 12, 2009#8
You can use a heat gun or hair dryer.
PETERPOOPOahu · Sep 12, 2009#9
Originally Posted by cali yaris ↑
I think 350 is on the dangerous side, but that's from what I've read, I haven't tried it myself! (PeterPoop got a little melting at a lower temp, for example)
Yes. You gotta experiment with a lower temp if you haven't done this before in your oven. Everyone told me 225-230 preheat for 10 min,and then leave the headlights in there with it still at 220-225. I preheated at 225 and turned it down to 220 and left it in there for only 4 min, and one of my headlights started to melt in the back! This is a pic where I had to epoxy some plastic to "patch" the melted areas. All ovens are different!

alvantThread starterSG · Sep 13, 2009#10
oh man that's awful peter. good that u fixed it. thanks for the advice guys!
xen555Puerto Rico · Sep 30, 2009#11
when i paint the headlights of my old tiburon i set the oven at 150 and wait about 6 to 7 minutes... dont open so easy but never melt
squall_xSan Diego · Sep 30, 2009#12
When I baked my headlights I did it at 215 preheat until oven was ready (about 6-8mins) I would assume it varies by brand. Mine beeps when is ready. Then baked headlights for 4mins on the dot. I had no melting and it came of pretty easy.
jounabayamon puerto rico · Oct 1, 2009#13
its so funny u guys talkin about bakin it looks like a food channel...btw i didnt bake my headlights to remove them i used my gilrfriends hair dryer and they came out clean but had to be back n forth with it for a bit