CTScottOriginal postUSA, CT · Sep 7, 2009#1I know people have run 13" Miata wheels (and some have found that some of the miata 13's don't clear the calipers). Is there any chance that 12" rims will fit, even if it requires a 1/2" spacer and longer studs?
The reason I ask is that the largest rim diameter for the swamp fox tires that I want to run on Crashy is 12". I found out that the Subaru Justy had 12" 4x100 rims, and they seem to be readily available at junk yards. Before I take the hour ride to the nearest place to me that has them I wanted to see what people thought about fitment.
Replies 20
center bore is different: Justy is 56.1 compared to 54.1 for us
SpeedjunkiejpJacksonville, FL · Sep 7, 2009#3 Originally Posted by
sex ↑ center bore is different: Justy is 56.1 compared to 54.1 for us
hub centric rings can correct that.
To OP: Honestly i would drive and buy one to try it. They should charge you maybe $10-20 for one rim.
CTScottThread starterUSA, CT · Sep 7, 2009#4 Originally Posted by
Speedjunkiejp ↑ hub centric rings can correct that.
To OP: Honestly i would drive and buy one to try it. They should charge you maybe $10-20 for one rim.
They are only $15 each, so that probably is my best bet.
LorenSafety Harbor, FL · Sep 7, 2009#5 Originally Posted by
sex ↑ center bore is different: Justy is 56.1 compared to 54.1 for us
Which means the wheel will fit just fine over the hub. All of the wheels in question are lug-centric, they don't require an exact fit on the hub bore.
Not sure you'll fit a 12" wheel over the Yaris front brakes, though.
jonismynameadirondacks, ny · Sep 7, 2009#6rotor diameter is 10.03 inches. helpful? i dont know. but it's what i can lookup quickly at work on labor day...
jonismynameadirondacks, ny · Sep 7, 2009#7supmetSouthern California · Sep 7, 2009#8Front brake delete FTW
cali yarisCanoga Park, CA · Sep 7, 2009#9Small Brake Kit? (SBK?) hmmmm... 😉
AlexNet0Rockland, ME · Sep 7, 2009#10^haha
I cant wait to see where he goes with this whole thing
CTScottThread starterUSA, CT · Sep 8, 2009#11I decided to try a quick fitment test this morning. I took one of the 12" wheels off of my tractor (with the swamp fox tires that I want to run on Crashy) and tried to see if it would fit over the caliper. Initially the dust shield was in the way, so I removed it. At that point I could slide the wheel most of the way on, but it is very tight. With the dust shield on, the inner diameter of the wheel needs to be just shy of 12". With it off, the inner diameter needs to be right about 11".
On Thursday I am going to take a run to the junk yard that has the Justy wheels, now that I know what measurements I need to check.
Picture not included in this copy1 attachment not included in this copy
CTScottThread starterUSA, CT · Sep 9, 2009#12I checked out the 12" Justy wheels today and they are definitely a no-go. I found that the minimum diameter to clear the caliper is just shy of 11". The Justy wheels have an inside diameter of about 10 1/4". So, it looks like no 12" Swamp Fox tires for Crashy.
In doing some research on larger diameter ATV tires, I have found 15 tires. The smallest of which are 26x8x15, which will clear my lack of fenders, but I am not sure if they will clear for turning.
jonismynameadirondacks, ny · Sep 9, 2009#13sorry to hear that man. have you seriously considered the front brake delete? although the tire diameter would leave the front end sitting rather low wouldn't it?
TamagoOff Grid · Sep 9, 2009#14is crashy an auto or manual?
you could always relocate the calipers/rotors to the differential a la H1 Hummer
CTScottThread starterUSA, CT · Sep 9, 2009#15She's an auto. There's not much clearance on the differential. That's an interesting idea though. The other thing I was thinking is to swap the fronts for another set of brake drums.
I was taking some measurements this evening and I think the 26x8x15's will actually work (steering and all). They would actually give me a 1" lift from the stock 24" tire diameter.
CTScottThread starterUSA, CT · Sep 9, 2009#16 Originally Posted by
jonismyname ↑ sorry to hear that man. have you seriously considered the front brake delete? although the tire diameter would leave the front end sitting rather low wouldn't it?
The tires that I was looking at (off my tractor) are 23x8x12 tires, so I would lose 1/2" if I was able to use them. They also come in 25x8x12, which would add 1/2".
jonismynameadirondacks, ny · Sep 9, 2009#17 Originally Posted by
CTScott ↑ The tires that I was looking at (off my tractor) are 23x8x12 tires, so I would lose 1/2" if I was able to use them. They also come in 25x8x12, which would add 1/2".
but it looks so small without the fender! hahaha
that was a bit of an optical illusion...
arcticvitzStudio City, CA · Sep 15, 2009#18 Originally Posted by
CTScott ↑ I decided to try a quick fitment test this morning. I took one of the 12" wheels off of my tractor (with the swamp fox tires that I want to run on Crashy) and tried to see if it would fit over the caliper. Initially the dust shield was in the way, so I removed it. At that point I could slide the wheel most of the way on, but it is very tight. With the dust shield on, the inner diameter of the wheel needs to be just shy of 12". With it off, the inner diameter needs to be right about 11".
On Thursday I am going to take a run to the junk yard that has the Justy wheels, now that I know what measurements I need to check.
Attachment 27957
Is your front end link bent or am I just seeing things?
CTScottThread starterUSA, CT · Sep 15, 2009#19 Originally Posted by
arcticvitz ↑ Is your front end link bent or am I just seeing things?
It is bent. She has quite a few bent parts. I just replaced her bent axle and bent lower suspension arm on the other side.
PHXDEMONPhoenix, AZ · Sep 17, 2009#20Making a dune buggy yaris? 😆 that's awesome.
Betriventedmonton · Sep 17, 2009#21Snow plow yaris.. even better! YOu would've had a LOT of work were you up here in Vancouver with that thing this past winter..