Yarisworld Archive

Black Projector Headlights Question

43 posts · 17,956 views

ruimondOriginal postPerth, Australia · Sep 6, 2009#1
Picture not included in this copy

These headlights have been around for awhile and i know a few threads have been covered about it. I was thinking of buying them, i know some people have said the light output was bad and some say its abit better then stock.

Anyway i was told by a fellow member that because we have to use the old indicator socket from the Original Assembly that the Australian sockets are of a different size of that of the ones being sold, which i think are mainly from Taiwan or something. As he has to use another method to hold his in place.

The question is to the people who own these lights, have you had any issues getting the indicator socket/bulb to go into place without having to glue or stick it to hold it there.

And generally is there a specific seller people have been buying from? I've noticed some stores sell slightly different looking ones sometimes.

Thank you in advance. I know some people don't like the idea of buying these lights. Haha.

Replies 42

cali yarisCanoga Park, CA · Sep 6, 2009#2
the turn signal socket has 3 tabs in some places and 4 tabs in others. I can post more when I'm at my shop on Tuesday and can look at my stock sockets.
1NZYaris1New Zealand · Sep 6, 2009#3
You Would almost be better off with the Retro hid/ projector
Garm is selling .
I have a set arriveing tomorrow , For my own car 😆

but as for your querry you can buy the correct fitting locally
at your local Auto electrical shop .
ruimondThread starterPerth, Australia · Sep 6, 2009#4
Originally Posted by cali yaris ↑
the turn signal socket has 3 tabs in some places and 4 tabs in others. I can post more when I'm at my shop on Tuesday and can look at my stock sockets.
Thanks for the info Garm. I think what someone i was talking to was saying was the actually the bulb fitting into the hole thing on the top where the bulb goes in.

I think your talking about the actual plug that goes into the power socket thing.

Sorry i think i explained it incorrectly before.

Originally Posted by 1NZYaris1 ↑
You Would almost be better off with the Retro hid/ projector
Garm is selling .
I have a set arriveing tomorrow , For my own car 😆

but as for your querry you can buy the correct fitting locally
at your local Auto electrical shop .
Haha Ray, they would be good. But i'm also not keen on opening up my own headlight housing and doing my own DIY. Haha. Would be good to paint the inside black.

Anyway yeh maybe i needa get a different bulb.
ruimondThread starterPerth, Australia · Sep 6, 2009#5
This is what i was told and i quote:

Re: Black Projectors

--------------------------------------------------------------------------------

What i mean. Everything fits well except the turning signal bulbs.

The socket where you insert the turning signal bulbs are different. I tried for about 1 hour to insert the turning bulbs into the headlights, doesnt fit. So you have to somehow glue them down in the socket. I used blutack....
1NZYaris1New Zealand · Sep 6, 2009#6
Got ya , simple answer , some use a 1156 bulb and some use a 1157 bulb
the differance is the 2 pins on the side of the bulb .
if you buy them and need help just holla .
or you could send me a set of stock head lights and i will do it for you .
The retro fit that is 😁
ruimondThread starterPerth, Australia · Sep 6, 2009#7
Originally Posted by 1NZYaris1 ↑
Got ya , simple answer , some use a 1156 bulb and some use a 1157 bulb
the differance is the 2 pins on the side of the bulb .
if you buy them and need help just holla .
or you could send me a set of stock head lights and i will do it for you .
The retro fit that is 😁
Cool Thanks, i'll have a look for some bulbs if i do need them. Otherwise i'll see how it fits myself.

Haha i wonder how much a set of stock head lights sell for. 🙂
kuyachris84Illinois · Sep 6, 2009#8
I just bought a pair and it arrives for me this wednesday off of ebay. I'll let you know if I have problems with the plugs or light bulbs.
ruimondThread starterPerth, Australia · Sep 6, 2009#9
Originally Posted by kuyachris84 ↑
I just bought a pair and it arrives for me this wednesday off of ebay. I'll let you know if I have problems with the plugs or light bulbs.
Cool Thanks Kuya, though i might be buying it before then. As the special auction ends on tuesday. Will see how it goes i guess.

Haha thats some mighty amount of bandwidth you have in your signature pic.🤤
AND189australia · Sep 8, 2009#10
hey i have just got sum off ebay and i was wondering can i plug in my H4 HID,s into the projectors?? i have not got them yet and i was a little confuzled with the blinker size ??? i also got the rear lights too
Originally Posted by 1NZYaris1
Got ya , simple answer , some use a 1156 bulb and some use a 1157 bulb
the differance is the 2 pins on the side of the bulb .
if you buy them and need help just holla .
or you could send me a set of stock head lights and i will do it for you .
The retro fit that is
rock on dudes
1NZYaris1New Zealand · Sep 8, 2009#11
Ahum Ruimond was chasing those . i guess he missed them 👍
ruimondThread starterPerth, Australia · Sep 8, 2009#12
Originally Posted by 1NZYaris1 ↑
Ahum Ruimond was chasing those . i guess he missed them 👍
Nah i got them Ray. Mine were the combo package. Their being shipped off tommorow. 👍

AND189 must have bought it off a different auction.
1NZYaris1New Zealand · Sep 8, 2009#13
Cool , i guess you will be working on the car very soon then 👍
AND189australia · Sep 9, 2009#14
mate i got the combo pack too i spoke to the guy after the action had to sets of heads and tales i realy only want the heads though i will put them bothe on and if they look good i guess i will keep them although i dont want the trashy bling look i wouldnt mide the rear ones non smoked in the plain red thay look a bit sporty and stockish
ruimondThread starterPerth, Australia · Sep 9, 2009#15
Originally Posted by AND189 ↑
mate i got the combo pack too i spoke to the guy after the action had to sets of heads and tales i realy only want the heads though i will put them bothe on and if they look good i guess i will keep them although i dont want the trashy bling look i wouldnt mide the rear ones non smoked in the plain red thay look a bit sporty and stockish
Oh ok awesome. Yeah im mainly just using the Headlights most likely. My friend will be taking the taillights.

Would have been better if they were the plain RS taillights. But yeh, will see how they look in real life.

Mine were posted out today, ETA says next week 18th. But will see if it updates tommorow.
kuyachris84Illinois · Sep 10, 2009#16
so i got these installed n wen i turn my car off... the halos still look like they're. on... its like glowing / very dim... is this okay?

I know this has been discussed b4 but can't do a sear ch right now on my phone
AND189australia · Sep 10, 2009#17
yeh the RS one are nice where could i find a pair like that swap even ??
MidonGainesville, TX · Sep 11, 2009#18
Just a fyi on thoese. I bought as set and they looked great and still look ok, but after about 3 months in the texas sun the UV coating on them started to come off and they are not as glossy now. so this k=might happen to you and then again it might not. I do know I will have to go over mine with some polishing compound to get the luster back in them. One the light output with the stock bulbs they came with it was a lot less then the stock headlight assemblies. But since I also bought a HID kit for them (and yes I have them all adjusted right so i not blinding anyone.) they are really nice now.
kuyachris84Illinois · Sep 11, 2009#19
just installed it 2 days ago. Adjusting the projector beam was kinda annoying though. Install was easy as hell though and brightness isn't too bad. I think they're just slightly less bright than stock but not too much where you'd complain about it.

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

No connector problems, people have problems fitting the turn signal. Mine fit in fine... used the stock bulb and plug. Sorry if I'm thread jacking lol.
ProhibitOklahoma City · Sep 11, 2009#20
Mine was quick and easy.
ruimondThread starterPerth, Australia · Sep 11, 2009#21
Originally Posted by kuyachris84 ↑
just installed it 2 days ago. Adjusting the projector beam was kinda annoying though. Install was easy as hell though and brightness isn't too bad. I think they're just slightly less bright than stock but not too much where you'd complain about it.

No connector problems, people have problems fitting the turn signal. Mine fit in fine... used the stock bulb and plug. Sorry if I'm thread jacking lol.
Looks great on black, kuyachris84. Good that it worked out well and didn't have problems. I should be getting mine next week sometime, as its still somewhere on the courier. Hopefully i don't run into any issues then.

How bright are the the LEDs? I prob won't connect those as it might attract the cops. lol.

Do you have a close up photo of how big your turn signal bulb is? like shape wise? Thanks
kuyachris84Illinois · Sep 11, 2009#22
Originally Posted by ruimond ↑
Looks great on black, kuyachris84. Good that it worked out well and didn't have problems. I should be getting mine next week sometime, as its still somewhere on the courier. Hopefully i don't run into any issues then.

How bright are the the LEDs? I prob won't connect those as it might attract the cops. lol.

Do you have a close up photo of how big your turn signal bulb is? like shape wise? Thanks
I'll take a close up pic tomorrow... i just used the stock turn signal bulbs but they're the same shape and size of what you get with the head lights. I was thinking of putting the 1157 clear bulb but already have clear turn signals in the back... more clear turn signals and i'm guaranteed to be pulled over lol.
ProhibitOklahoma City · Sep 11, 2009#23
Ah, guess I was kinda late eh? Haha, my bad.
ruimondThread starterPerth, Australia · Sep 12, 2009#24
Originally Posted by Prohibit ↑
Ah, guess I was kinda late eh? Haha, my bad.
Don't think you were late ;P i was the one asking the questin. LOL. I haven't gotten mine yet. But thanks!👍
ProhibitOklahoma City · Sep 12, 2009#25
Oh, that's the A.D.D kicking in. haha.
ruimondThread starterPerth, Australia · Sep 12, 2009#26
These black version taillights are coming with the package.

Picture not included in this copy

Wasn't sure if it would look any good on White, so might not put them on. Bought them to split with my friend.

I photoshoped it on this photo below. Thoughts?

Picture not included in this copy
TheRealEnthMiami, FL · Sep 12, 2009#27
they look sick on white
kngrsllSpartanburg, SC · Sep 12, 2009#28
i did a search, no one has modified the stock headlamps?
MidonGainesville, TX · Sep 13, 2009#30
Originally Posted by ruimond ↑
Looks great on black, kuyachris84. Good that it worked out well and didn't have problems. I should be getting mine next week sometime, as its still somewhere on the courier. Hopefully i don't run into any issues then.

How bright are the the LEDs? I prob won't connect those as it might attract the cops. lol.

Do you have a close up photo of how big your turn signal bulb is? like shape wise? Thanks
The LED's are white and are facing to the fount of the car so are perfectly legal in all stats. only if u changes there color to anything other then white or yellow they become illegal
ruimondThread starterPerth, Australia · Sep 13, 2009#31
Originally Posted by Midon ↑
The LED's are white and are facing to the fount of the car so are perfectly legal in all stats. only if u changes there color to anything other then white or yellow they become illegal
Oh ok,i always thought they were blue leds. At least it looks like that in some photos. 😕
kuyachris84Illinois · Sep 13, 2009#32
In the picture it turned out blue... but they're white as can be lol. I passed like 20 cops already and none have pulled me over for them.
vtencolumbus · Sep 13, 2009#33
where did you get it as a package ?? how much ?
ruimondThread starterPerth, Australia · Sep 13, 2009#34
Originally Posted by vten ↑
where did you get it as a package ?? how much ?
It was just a special package on Ebay Australia. But both sets are sold already.🙂
ruimondThread starterPerth, Australia · Sep 22, 2009#35
Ok so i've installed these, love the look. But tried them out tonight with the original cutoff.

Do people think this cutoff is to high?

Im guessing projectors project the light in a different way. I noticed that when i'm up close to something i can see the beams clear. But once your furthur away from the vechicle ahead of you it kinda spreads out and gets furthur in distance.

When im behind a car it seems that the lights shine roughly almost near where their boot ends. E.g on a Sedan boot.

Do people that have these lights adjust them by those long screw things? Is it just a matter of turning it closewise and anti-clockwise for higher and lower? I couldn't turn them with my hand. So im guessing people need to use a screwdriver?

This is my cutoff shining at the garage door without changing anything yet.

Basically are projectors meant to spread out more then normal lights as in less focus. This is the first time i've had projectors. I could be aimed to high.

Picture not included in this copy
MidonGainesville, TX · Sep 22, 2009#36
Even after I put my HID in them I had to adjust them a little. And let me warn you since the did not put the adjusters on a vertical and horizontal it a pain to adjust they pot the adjustment on the diagonal so you have to take a headlight out adjust put it back and look, repeat this about 20 times and you will get it were it needs to be.
kuyachris84Illinois · Sep 22, 2009#37
Originally Posted by Midon ↑
Even after I put my HID in them I had to adjust them a little. And let me warn you since the did not put the adjusters on a vertical and horizontal it a pain to adjust they pot the adjustment on the diagonal so you have to take a headlight out adjust put it back and look, repeat this about 20 times and you will get it were it needs to be.
yeah i had to do this a bunch of times behind my mom's suv and my brother's sedan to get the right adjustment as not to blind the hell out of other people. The long screws (2 of them) are for adjusting the high beam. The small screws.. there's 2 of them ... are used to adjust the projectors.

And yes, I do think you're right one is a little high. The left one seems fine.
ruimondThread starterPerth, Australia · Sep 22, 2009#38
Hrmmm thanks for the reply. That kinda sucks that you have to remove it and adjust. As my driveway isn't flat and i can't excatly start taking my bumper off at some random place at night. Unless i goto some friends house to do it haha.

I'll see what i can do. Damn why does it have to be so much hassle.
MidonGainesville, TX · Sep 22, 2009#39
I did mine at the car wash in the middle of the night had a cop roll by and ask what i was up to and watched for a bit then left.
ruimondThread starterPerth, Australia · Sep 22, 2009#40
There's the two flater screws for the low beam. Is the visable one from the engine bay side by any chance the one that adjusts the height? Or is the one furthur in which requires removing the bumper the one that adjusts the height?

I can't test it out right now as i'm at work :P haha
MidonGainesville, TX · Sep 22, 2009#41
they both adjust height since they work by adjusting the beam on a diagonal angle you will have to adjust both which requires pulling the headlight out adjust and place it back and then look. I know it sucks and I have no clue why they did it on the diagonal instead of horizontal and vertical
kuyachris84Illinois · Sep 22, 2009#42
Originally Posted by Midon ↑
they both adjust height since they work by adjusting the beam on a diagonal angle you will have to adjust both which requires pulling the headlight out adjust and place it back and then look. I know it sucks and I have no clue why they did it on the diagonal instead of horizontal and vertical
don't u wish it were just one screw for up and down? and another screw for left and right? But nooooooo.... it works in diagonals!
ruimondThread starterPerth, Australia · Sep 23, 2009#43
Got my cutoff fixed. Took about 1-2hrs. Taking off the bumper like 5times. I can finally see beams on the road. Haha. Much better visability. Thanks to a friend that helped me out. Damn these projectors are tricky.