Before I rip the "Toyota" and "Yaris" emblems off of my rear hatch just wanted to know if they had locating pins on them. Thanks.
Holes under the emblems?
18 posts · 4,789 views
Replies 17
nope. just beautifully painted sheetmetal. your car will be much happier.
you can also modify the toyota with a razor blade and reinstall as "toy". im in the process of that now, figured i'd confuse a few folks.
you can also modify the toyota with a razor blade and reinstall as "toy". im in the process of that now, figured i'd confuse a few folks.
Good to know! Thanks 🎉Originally Posted by jonismyname ↑nope. just beautifully painted sheetmetal. your car will be much happier.
you can also modify the toyota with a razor blade and reinstall as "toy". im in the process of that now, figured i'd confuse a few folks.
I wanted to remove those 2 and put another one in the lower right corner that MicroImage is selling, if it's not too big. Guess the next step is to go find that out now.
It does have 2 pins behind it. Look up debadging in the DIY section..
OP is referring to the branding badges 'Toyota' and 'Yaris' - no pins.Originally Posted by lilredrocket ↑It does have 2 pins behind it. Look up debadging in the DIY section..
Oh ok I guess I was thinking about the other Toyota in the middle.... My bad
no pins under the "yaris" logo , a piece of dental floss or thin string is the easiest way to remove it .
These types of logos are easer to remove it you first heat it with a hairdrier before using the dental floss.
I was able to use a plastic tool about the size of a credit card...sliced it off. Pulled the rest off with my fingers then washed and waxed the areas.
fishing line FTW
oh god the chistopher walkens are multiplying out of control...quick the bug spray
heat it up with a blow dryer and it will come off with ease...no scratches to worry about.
hair dryer + fishing line = 10 minute job.
OR like I did: hot day + floss + 5-10 minutes = 🤘lookin' sexy🤤Originally Posted by coffiend ↑hair dryer + fishing line = 10 minute job.
Out of curiosity, would it be possible after you remove the emblems to put them back on the car but in a different spot?
Yes.Originally Posted by Slick ↑Out of curiosity, would it be possible after you remove the emblems to put them back on the car but in a different spot?
3M makes very strong two sided tape, meant to secure body kits--perfect for reapplying emblems wherever you wish. Any auto parts store will have something similar.
Nice, thanks for the reply 👍