IsLNdbOiOriginal postLas Vegas, NV · Sep 4, 2009#1Replies 18
Red HorseCosta mesa, California · Sep 4, 2009#2.....
1 attachment not included in this copy
IsLNdbOiThread starterLas Vegas, NV · Sep 4, 2009#3Thanks for the picture, but that doesn't answer the question...
Bob Dogthe Boondocks, NC · Sep 4, 2009#4measure the damn thing
IsLNdbOiThread starterLas Vegas, NV · Sep 4, 2009#5I would, but I have an old exhaust tip in there right now and don't have the time to remove it to measure. Also, I'm not sure what outlet size and inlet size are.
If you have a problem with me asking, why even post in this damn thread?
RyuSurrey, BC · Sep 4, 2009#6I think the one with length 6" might stick out a bit, I would suggest just buy all other 3 with different size and try to fit them yourself, keep the one you like and return the rest. 😛
IsLNdbOiThread starterLas Vegas, NV · Sep 4, 2009#7Yeah, I don't really want a long exhaust tip either. I'm hoping the 4" one fits properly, but I'm looking for someone to confirm.
Diameter of the stock exhaust outlet is 50mm, about 1.96"... hope this helps...
kimonaHuntington Bch, CA · Sep 4, 2009#9IsLNdbOiThread starterLas Vegas, NV · Sep 4, 2009#10 Originally Posted by
alvant ↑ Diameter of the stock exhaust outlet is 50mm, about 1.96"... hope this helps...
Thanks alvant. That's much smaller than the 2.25" inlet of the one I want. I hope the clamp can adjust to that size.
Originally Posted by
kimona ↑
Thanks kimona. That's quite a bit longer than what I want though. It's 8" long vs. 4" for the one I linked to above.
kimonaHuntington Bch, CA · Sep 4, 2009#11 Originally Posted by
IsLNdbOi ↑ Thanks kimona. That's quite a bit longer than what I want though. It's 8" long vs. 4" for the one I linked to above.
This one at 8" fits perfectly. Push it all the way back onto the exhaust pipe until it's flush against the plate, then center and tighten. It fits under the bumper quite a bit.
PHXDEMONPhoenix, AZ · Sep 4, 2009#12 Originally Posted by
IsLNdbOi ↑ Thanks alvant. That's much smaller than the 2.25" inlet of the one I want. I hope the clamp can adjust to that size.
Thanks kimona. That's quite a bit longer than what I want though. It's 8" long vs. 4" for the one I linked to above.
You don't have to attach it at the very end of the exhaust. Both tips you posted will probably fit but my touch the bumper.
PHXDEMONPhoenix, AZ · Sep 4, 2009#13Also that tip kimona posted can be picked up at walmart for like 12 bucks and is pretty decent quality. It's no borla tip but pretty good for the price.
RUFFSTUFFKINGSLAND, GA · Sep 4, 2009#14I gots me a Walmart tip!
IsLNdbOiThread starterLas Vegas, NV · Sep 4, 2009#15I have the square version of that tip from Wal-Mart. I got mine from Pep-Boys. It's shorter than the one from Wal-Mart, but it still makes the exhaust pipe look too long.
I'm going to try the Borla to see if I like it any better.
kimonaHuntington Bch, CA · Sep 4, 2009#16 Originally Posted by
IsLNdbOi ↑ I have the square version of that tip from Wal-Mart. I got mine from Pep-Boys. It's shorter than the one from Wal-Mart, but it still makes the exhaust pipe look too long.
I'm going to try the Borla to see if I like it any better.
I'm not sure I understand. With the 8" long tip, it fits under the bumper edge a full 2".
Like PHXDEMON explains above, "You don't have to attach it at the very end of the exhaust." Push the tip back all the way until it fits snugly up against the exhaust pipe plate. Geez, a 10" long tip would be flush with the bumper edge.
the_bossMontreal Qc · Sep 4, 2009#17 Originally Posted by
Bob Dog ↑ measure the damn thing
🤣😆
sorry im tired...been working for the last 16 hours....!!!
charleschia1986Perth, WA · Sep 8, 2009#18from the attached picture.
i am pretty sure the middle one will FIT because that's exactly what i am using now...
regards, hope this helps..
IsLNdbOiThread starterLas Vegas, NV · Sep 8, 2009#19The pic. in post #2 (Red Horse's post)?
Those aren't even the ones I was asking about. The choices are in post #1.