FS:
Two Dash-Topper dashboard covers. Both are velour. One is black and the other dark gray.
http://www.dashtopper.com/shop.net/VelourDT.aspx
Both include all pieces they originally came with. The black one will come in its original box and packaging. The dark gray will come wrapped in a plastic bag in a brown box.
Also, on both sets the piece that goes on the driver side glovebox has a hole cut in the middle (I have a Garmin GPS mount permanently attached to my driver side glovebox door and the holes were for the mount to stick through).
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
$37 + shipping for each set.
================================================== ================================================== ======================
ProClip Angled Mount (fits LB only):
ProClip Item #: 853742
http://www.proclipusa.com/?sectionpath=144&pageid=11575
Picture not included in this copy
ProClip Center Mount (fits both LB and Sedan):
ProClip Item #: 853835
http://www.proclipusa.com/?sectionpath=144&pageid=11986
Picture not included in this copy
$17 + shipping for each ProClip
================================================== ================================================== ======================
Finally, I have one 180mm Double Din Trim Piece. I tried modifying it to work with my Pioneer head unit, but it wouldn't fit.
Using a dremel, I shaved down the inner sides of the frame. It has a scratch on both of the bottom corners.
I'm guessing if your good at working with CF or you like wrapping these trim pieces in vinyl or leather, this would be a good piece for you to work on.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
$34 + shipping for the 180mm DD Trim Piece
================================================== ================================================== ======================
My heatware for references:
http://www.heatware.com/eval.php?id=35947
Two Dash-Topper dashboard covers. Both are velour. One is black and the other dark gray.
http://www.dashtopper.com/shop.net/VelourDT.aspx
Both include all pieces they originally came with. The black one will come in its original box and packaging. The dark gray will come wrapped in a plastic bag in a brown box.
Also, on both sets the piece that goes on the driver side glovebox has a hole cut in the middle (I have a Garmin GPS mount permanently attached to my driver side glovebox door and the holes were for the mount to stick through).
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
$37 + shipping for each set.
================================================== ================================================== ======================
ProClip Angled Mount (fits LB only):
ProClip Item #: 853742
http://www.proclipusa.com/?sectionpath=144&pageid=11575
Picture not included in this copy
ProClip Center Mount (fits both LB and Sedan):
ProClip Item #: 853835
http://www.proclipusa.com/?sectionpath=144&pageid=11986
Picture not included in this copy
$17 + shipping for each ProClip
================================================== ================================================== ======================
Finally, I have one 180mm Double Din Trim Piece. I tried modifying it to work with my Pioneer head unit, but it wouldn't fit.
Using a dremel, I shaved down the inner sides of the frame. It has a scratch on both of the bottom corners.
I'm guessing if your good at working with CF or you like wrapping these trim pieces in vinyl or leather, this would be a good piece for you to work on.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
$34 + shipping for the 180mm DD Trim Piece
================================================== ================================================== ======================
My heatware for references:
http://www.heatware.com/eval.php?id=35947