Yarisworld Archive

cup holder removal

10 posts · 8,428 views

DOMAVOriginal postMALTA · Aug 26, 2009#1
hi can someone help me and tell me how to remove the cup holder the one at the top near the steering wheel ?

Replies 9

SweetRSOttawa · Aug 26, 2009#2
i second this....damn spilt coffee stains!!
devinlamotheSudbury, Canada · Aug 26, 2009#3
It's actually pretty tricky. You have to open it first, then squeeze the sides in. There is a little plastic piece that prevents it from falling out, and you have to kind of stick a flat head screwdriver in there to make it come out.

Oh and make sure you remove the screw from the bottom of the holder (visible only when the cup holder is open).

I'll see if I can post pics up a little later on today. I took mine out and put them in the dishwasher. 😁
DOMAVThread starterMALTA · Aug 26, 2009#4
Originally Posted by devinlamothe ↑
It's actually pretty tricky. You have to open it first, then squeeze the sides in. There is a little plastic piece that prevents it from falling out, and you have to kind of stick a flat head screwdriver in there to make it come out.

Oh and make sure you remove the screw from the bottom of the holder (visible only when the cup holder is open).

I'll see if I can post pics up a little later on today. I took mine out and put them in the dishwasher. 😁
it would be great if you have some pics thanks
RevssonSoutheast Wisconsin · Aug 27, 2009#5
Originally Posted by devinlamothe ↑
It's actually pretty tricky. You have to open it first, then squeeze the sides in. There is a little plastic piece that prevents it from falling out, and you have to kind of stick a flat head screwdriver in there to make it come out.

Oh and make sure you remove the screw from the bottom of the holder (visible only when the cup holder is open).

I'll see if I can post pics up a little later on today. I took mine out and put them in the dishwasher. 😁


Sorry, couldn't resist putting that in. 😁
IsLNdbOiLas Vegas, NV · Aug 27, 2009#6
Instead of removing it, why not just stop using it? What are you going to do with that space where it once was?
DOMAVThread starterMALTA · Aug 27, 2009#7
Originally Posted by IsLNdbOi ↑
Instead of removing it, why not just stop using it? What are you going to do with that space where it once was?
no i'm not going to remove it i want to change it cause its all marked in the front, actually my toyota is new and the toyota dealer is going to change it for me for free,

i want to know what it needs to be done so when i go and collect my car i see if the damaged the surrounding from where they took it off
devinlamotheSudbury, Canada · Aug 27, 2009#8
Sorry for no pics yesterday, I totally forgot. Will go out and grab some pics in a few.
devinlamotheSudbury, Canada · Aug 27, 2009#9
Ok so here goes. Don't mind the coffee stains lol cups tend to spill a lot in these holders, they get all the vibration from the road.

1) Remove the screw. I don't know if this is absolutely necessary but I do it anyways.

Picture not included in this copy

2) Take a thin screwdriver and try and pry one side, while taking your other hand and squeezing both sides together. You have to pull quite hard to get the top portion to come out. So don't be shy here.

Picture not included in this copy

3) Once the top piece is out, take your small screwdriver and pry & pull the clips near the bottom. There is one clip on each side, but the clip on the left is the easiest to get off first.

Picture not included in this copy

Picture not included in this copy
DOMAVThread starterMALTA · Aug 27, 2009#10
thanks for all your help