Yarisworld Archive

Dyno day today 8/23

122 posts · 23,004 views · page 3 of 3

Replies continued

PETERPOOPOahu · Aug 31, 2009#101
:P

Man, if i lived by you, i'd have an entire production crew to film your car. There's gotta be some people on the board willing to film your car!!!!!!!!! ahhhhhhh. Can't you make your employees do it. ;)
Penguin GarageFL · Aug 31, 2009#102
Garm,

First off congrats on the new tune.

Is it possible to get a complete parts list of what went into this motor build?

I've been trying to follow but I have a feeling I missed some goodies you added. :)

keep it up.
ParmasML · Sep 1, 2009#103
^^ +1 🤘
eTiMaGoBangkok, Thailand · Sep 1, 2009#104
Originally Posted by PETERPOOP ↑
:P

Man, if i lived by you, i'd have an entire production crew to film your car. There's gotta be some people on the board willing to film your car!!!!!!!!! ahhhhhhh. Can't you make your employees do it. ;)
He'd ask JR to do it but then it'll be hard to clean up the stains... 🤮
cali yarisThread starterCanoga Park, CA · Sep 1, 2009#105
what kind of stains... ewwww
TheRealEnthMiami, FL · Sep 1, 2009#106
interesting...
crxgamesWalton, Kentucky · Sep 1, 2009#107
Pretty impressive...

Keep an eye on that plastic manifold. I've seen bad things happen to them above 15psi. A friend of mine had one explode, and I've seen them with serious stress marks.
ParmasML · Sep 3, 2009#108
Hey garm I wish to ask a couple of question about your setup....

I never heard you mention the flywheel? Did you lightened it or still using stock?

What Type of Spark plugs you are using? How much they are rated?

Oil cooler?

When you say mod the Aem for VVT what do you mean?

Are the valves and springs still stock on 20psi?
changchewsoonMalaysia · Sep 4, 2009#109
Originally Posted by cali yaris ↑
got her up to 310, then backed off for a better curve.

303 whp / 284 torque @ 20 psi

Picture not included in this copy
hi garm, congratulations and nice one! :)

noticed the correction factor ratio (tfc) is at 1.00, does it mean there isn't any correction applied to the figures? (or if there is any needed???)
cali yarisThread starterCanoga Park, CA · Sep 4, 2009#110
I don't know that, it was a chassis dyno if that means anything. I can certainly ask.
scioncrewHB · Sep 4, 2009#111
total correction factor (tcf) inter your drivetrane loss % to find out actual hp
GnomeBodyUS-V.A. · Sep 8, 2009#112
at 300hp thats something like what, 1hp per 7lbs... sick🙇
CASTREXCosta Rica · Sep 8, 2009#113
So when are we having some 1/4 mile times and track videos???
talnlnkySpokane, Wa · Sep 8, 2009#114
no joke... i'm watching this thread just to see 1/4mi time and speed.
The SpectacleTampa, FL · Sep 10, 2009#115
300hp would be about 280-285hp on a dynojet. With that kind of power, the Yaris should ET in the low 12's (assuming any semblance of traction) and trap about 115mph.

You still on stock transmission? How do those long ass gears feel in boost? Also, I missed the EMS you're using...I think you converted your wiring harness over to a TC or something like that to use their AEM?
LafiroNYC · Sep 10, 2009#116
Wow, I am amazed at the work. Way to go Garm, keep up the great work. Good stuff to rear. Can't wait to hear from you with more updates!
cali yarisThread starterCanoga Park, CA · Sep 10, 2009#117
I think a DynoJet (rollers) would show higher hp, not lower. That is my experience with them, anyway.

Still on stock trans, and I am liking the gears with this much power. We ripped out all factory wiring, and re-wired by hand for the AEM EMS.
RUFFSTUFFKINGSLAND, GA · Sep 10, 2009#118
You can tweak a Dynojet to read anything you want within reason. Gimme an Eddy Current dyno FTW.
The SpectacleTampa, FL · Sep 10, 2009#119
Originally Posted by cali yaris ↑
I think a DynoJet (rollers) would show higher hp, not lower. That is my experience with them, anyway.

Still on stock trans, and I am liking the gears with this much power. We ripped out all factory wiring, and re-wired by hand for the AEM EMS.
You are correct sir. I was thinking of a Dyno Dynamics and Mustang dyno's (both read low compared to DynoJets).

What kind of boost control you running? If you plan on taking it to the track, hope you got the boost by gear setup in the AEM with a MAC/AEM solenoid!
cali yarisThread starterCanoga Park, CA · Sep 11, 2009#120
AEM tru-boost controller/gauge. A/B settings for 13 psi/20psi. AEM solenoid.

it's just ok, I'm not thrilled with it just yet, but it does hold boost where it's supposed to be, and I did get a pretty nice power curve.
PETERPOOPOahu · Sep 11, 2009#121
videos....
puetato89orlando · Sep 11, 2009#122
+1