Yarisworld Archive

Toyota yaris 2002 - Hard clutch

11 posts · 12,910 views

abhinav_krOriginal postDublin · Aug 21, 2009#1
HI,

I have toyota yaris make 2002. When I purchased this, there was a sound while pressing the clutch and it was very hard. I changed the master cylinder and the sound was gone but I still feel the clutch very hard to press.
Clutch seems fine/easy when I start the car. After driving a mile or half, clutch start feeling hard.

What could be the reason?

Replies 10

RacerFreakXXXSomers NY · Aug 21, 2009#2
what do you mean by hard? like stiff like a race car clutch or just so hard it feels like it's locked up and you'll brake it?

are you the original owner of the car? if not was the car modified or did you have any work done to the car?
ShroomsterOrlando · Aug 22, 2009#3
did you bleed the master and clutch slave cylinders?
abhinav_krThread starterDublin · Aug 22, 2009#4
It's just the stiff clutch. The bitting point is not very low. I don't press the full pedal to change the gear.
It's problem when I have to wait on traffic signals and it's very difficult to keep clutch pedal depressed for a while.

I am not the first owner of the car.
TreyzLong Island, NY · Aug 22, 2009#5
Depends .. was the car modified by its previous owner? It just could be a higher pressure plate or it could be something mechanical. Post up pics too whaile your at it.
RacerFreakXXXSomers NY · Aug 22, 2009#6
lol, that's exactly what I want in my yaris. Sounds like they changed the clutch, imo. It should allow you to shift faster and yes it does suck in heavy traffic.

IMO just work out your legs a bit and get used to it. That or bring it to a mechanic and get charged up the but in expenses and replace everything including the clutch.
TLyttleKeremeos BC · Aug 22, 2009#7
Doesn't make sense to me: if it is easy when cold, and gets hard after use, something is wrong. Clear to me that heat is the culprit, but how, I don't really know...
RacerFreakXXXSomers NY · Aug 22, 2009#8
if it is defiantly hot and cold, fluids expand in the heat, so it must be something to do with your fluids in the line or cylinder.
TLyttleKeremeos BC · Aug 24, 2009#9
Hm. Maybe there is a stuck relief valve iin the system someplace, likely the master cylinder...
mik23GB · Jun 29, 2016#10
its clutch cable lub it
RigaudRigaud, Quebec, Can. · Jun 29, 2016#11
Originally Posted by mik23 ↑
its clutch cable lub it
7 years later!!! lmao