Yarisworld Archive

Fog lamps as back up low beams.

115 posts · 43,233 views · page 1 of 3

ellenbettyOriginal postStow Ohio · Aug 20, 2009#1
Is it possible to safely use fog lamps as back up for low beams? I hate one eye monsters. Nether of my Toyota Yarises have fog lamps. If fog lamps can be used as back up for low beams, which fog lamps would be the best choice? OE? LEDS?

Total cost to install in a Yaris? (x 2 for me).

Replies 114

RUFFSTUFFKINGSLAND, GA · Aug 20, 2009#2
Originally Posted by ellenbetty ↑
Is it possible to safely use fog lamps as back up for low beams? I hate one eye monsters. Nether of my Toyota Yarises have fog lamps. If fog lamps can be used as back up for low beams, which fog lamps would be the best choice? OE? LEDS?

Total cost to install in a Yaris? (x 2 for me).

I would think that if you mounted them in the standard fog lamp position they would be too low to have any effective use as regular headlights. I had a Mustang that I mounted 100w fog lamps on a switch to either side of the pony in the grill to use as headlights since I had headlight covers. They seemed to work but they were real bright, and I only got pulled over once... for forgetting to turn my regular headlights on...! Paid maybe $50 for them.
Sir A.Y. AtoyotSurrey, BC Canada · Aug 20, 2009#3
Originally Posted by ellenbetty ↑
Is it possible to safely use fog lamps as back up for low beams? I hate one eye monsters. Nether of my Toyota Yarises have fog lamps. If fog lamps can be used as back up for low beams, which fog lamps would be the best choice? OE? LEDS?

Total cost to install in a Yaris? (x 2 for me).
If you have a headlight out, replace the fuse or bulb, is my advice. The purpose of fog lights is to help you see under foggy conditions, not to "back up" other lighting.
kacWest/Central Illinois · Aug 20, 2009#4
Police officers I know will pull someone over for using foglights as headlights in town at night, and will possibly give a ticket for it.
ellenbettyThread starterStow Ohio · Aug 20, 2009#5
Originally Posted by RUFFSTUFF ↑
I would think that if you mounted them in the standard fog lamp position they would be too low to have any effective use as regular headlights. Paid maybe $50 for them.
Switch under the hood for each fog lamp. I never considered that idea. I planned to put the switch for the fog lamp in the dash. switch in the dash is easy to use in a heavy wind blown rain. I am not much for laying on my back installing fog lamps in a parking lot. Good way to get run over. Plus a violation of rental contract to work on car in driveway or parking lot.

Plus I suffer from neck, back and shoulder injuries from being hit by a van while in the USAF. So labor cost is also part of my question.

If I lived in Maryland, I would just call Pep Boys and make a appointment to get the fog lamps installed. Maybe I should have added a question about where to buy the fog lamp and then have the fog lamps installed. Dealer would be a choice for OE fog lamps.
1NZYaris1New Zealand · Aug 20, 2009#6
The Fog lights Garm sells , are real easy to instal , 98% plug and play
just fit the lights and splice in 2 wires your done . Or you could spend
another $170.US approx and buy the OEM Light stalk for the steering colum
and be totally plug and play .
the whole instal takes about 2 hr's .
i would do it for you but your a bit far away .
maybe another member on here might be willing to help you out .👍
RUFFSTUFFKINGSLAND, GA · Aug 20, 2009#7
Originally Posted by ellenbetty ↑
Switch under the hood for each fog lamp.

The switch was next to my shifter. The relay was in my dashboard.
RHDVIPbBLouisville, KY · Aug 20, 2009#8
please don't do it. I hate the truck guys who do it. And as said before, police will pull you over for it. I only use it when leaving my apartment complex at night to not shine my lights in my neighbors houses. After it get to the main road, I turn on my headlights.
ellenbettyThread starterStow Ohio · Aug 20, 2009#9
Originally Posted by 1NZYaris1 ↑
.
i would do it for you but your a bit far away
What, you haven't installed a big enough gas tank to drive that far? 😆
ellenbettyThread starterStow Ohio · Aug 20, 2009#10
Originally Posted by PK198105 ↑
Leds won't illuminate enough but will make u visible to others.and as other members have said fogs are too low to give you the driver enough illumination.
You talking about those LED circle after market head light assembly I seen on the Internet? Or LED lights to be placed where the fog lamps are placed?
1NZYaris1New Zealand · Aug 20, 2009#11
Originally Posted by ellenbetty ↑
What, you haven't installed a big enough gas tank to drive that far? 😆
The Yaris still has not mastered the act of water walking 🙁
or i would be over there already 😆
ellenbettyThread starterStow Ohio · Aug 20, 2009#12
Originally Posted by RHDVIPbB ↑
please don't do it. I hate the truck guys who do it. .
I am not talking about a bunch of lights on top of a fake roll bar. My brother had fog lamps installed behind the grill of his Ford Ranger. I forgot about that. Higher but harder to install. But the fog lamp would have to put out about the same lumes and cover about the same area as low beams to do what I want. Fog lamps with the same output as high beam head lights would not be what I want. The built in mounts for OE equipment is not the only place I could mount the fog lights.
ShroomsterOrlando · Aug 20, 2009#13
Originally Posted by ellenbetty ↑
I am not talking about a bunch of lights on top of a fake roll bar. My brother had fog lamps installed behind the grill of his Ford Ranger. I forgot about that. Higher but harder to install. But the fog lamp would have to put out about the same lumes and cover about the same area as low beams to do what I want. Fog lamps with the same output as high beam head lights would not be what I want. The built in mounts for OE equipment is not the only place I could mount the fog lights.
I think they're referring to the idiots who have certain models of cars who drive around with just fog lights and 'parking lights' on; those fog lights are usually mounted on the front bumper or o.e.m into the headlight area (like GM escalade/avalanche)....they're too bright and just plain out suck for those at the sedan/hatch eyeline.
RHDVIPbBLouisville, KY · Aug 21, 2009#14
Exactly. Not the roof ones. It isn't that hard to replace a $12 bulb in our housings. Just reach in and twist.
ellenbettyThread starterStow Ohio · Aug 23, 2009#15
Originally Posted by RHDVIPbB ↑
Exactly. Not the roof ones. It isn't that hard to replace a $12 bulb in our housings. Just reach in and twist.
It would be cheaper to buy some bulbs and put them in a glove box. But I do not like the idea of opening the hood to change light bulbs in the middle of a storm. Nothing like pouring wind driven rain to make changing bulbs a shocking experience. 😲 Plus Ohio is known for some bitter cold winter weather. Some times a push button backup is the best solution.

The behind the grill fog lamps would be better height wise for visibility. But I think the behind the grill fog lamps would be harder to install. I think the OE fog lamp kit would be easier to install.

Since I have this round of modifications to pay off my credit cards, I am not in a rush to charge the cost of buying and installing fog lamps.
CtrlAltDefeatIndianapolis IN · Aug 23, 2009#16
I don't think fog lights will work as a backup... My old grand am had fog lights and the switch for the head lights went out, so i could only have on amber parking lights and my fog lights. The lights were too low and barely illuminated 10 feet in front of the car (dimly)... maybe if they were VERY bright (do they make projector fog lights?) it might work, but in my grand am, limping home was a miserable experience...
ellenbettyThread starterStow Ohio · Aug 23, 2009#17
Originally Posted by CtrlAltDefeat ↑
I don't think fog lights will work as a backup... My old grand am had fog lights and the switch for the head lights went out, so i could only have on amber parking lights and my fog lights. The lights were too low and barely illuminated 10 feet in front of the car (dimly)... maybe if they were VERY bright (do they make projector fog lights?) it might work, but in my grand am, limping home was a miserable experience...
Thanks for the info. They do make different types of after market kit fog lights. All I have seen are meant as replacement units for already installed fog lights. A few kits are meant to be mounted on the bumper or behind the grill giving greater area coverage.

As someone on this forum likes to day, just do it. So I ordered the fog lamp kits from MicroImage. Support the forum type of act. Even if OE fog lamps (or after market copies of Toyota parts), are not bright enough to do the job, and I need to add a second set of fog, LED or head light lamps behind the grill to do the job properly, I still need the wiring harness, instructions, and switch for the dash for the fog lamps. I just hope that the dash switch and wiring are thick enough to handle a second set of lights.
1NZYaris1New Zealand · Aug 23, 2009#18
Run it throught the factory wiring for the first set , 👍
when and if you put a secound set in worry about the new wiring then 👍
personally i think you will be fine with just the OEM set up .
ellenbettyThread starterStow Ohio · Aug 23, 2009#19
If I under stand the details the OE like fog lamp kit is plug in simple. Only problem is having to remove the bumper to install the fog lamps. I also figure the dash will have to be pulled to install the on/off switch. Not permitted under the landlady's rules. Not possible with a bad neck. When the kits arrive I will have to pay a garage to install the fog lamp kits.
1NZYaris1New Zealand · Aug 24, 2009#20
Originally Posted by ellenbetty ↑
If I under stand the details the OE like fog lamp kit is plug in simple. Only problem is having to remove the bumper to install the fog lamps. I also figure the dash will have to be pulled to install the on/off switch. Not permitted under the landlady's rules. Not possible with a bad neck. When the kits arrive I will have to pay a garage to install the fog lamp kits.
No you don't need to remove the bumper ,but you can if you want too .
As you can just peel the plastic inner guard back to install the lights
and run the loom under the radiator and up into the fuse box under bonnet .
But no need for my instructions as Garm's kit comes with full easy
to follow instructions .👍
Oh and only the cover from the steering colum is removed , not the dash .
ellenbettyThread starterStow Ohio · Aug 24, 2009#21
I do not under stand why you would need to peel off the cover of the steering column. I remember reading about mounting the switch on the steering wheel. The steering wheel is a strange place to mount a fog lamp switch. Strange place to install the wiring for the on-off fog lamp switch. Does the kit use wiring in the column meant for another purpose? The logical place to install the on-off switch is in the blank spot in the dash. It is a shame that the spot where Toyota puts the start button is round. I guess I will have to dig out my Toyota Yaris manual and see if I can learn where Toyota normally mounts the on-off switch for the fog lamps.

Plus I am considering mounting the fog lamps behind the grill on the radiator with plastic self locking loops to avoid peeling back the bumper inner guard. Sounds nasty peeling back the bumper inner guard. But installing the fog lamps on the radiator may not be as easy as it sounds. The horn is in the way. So the fog lamps would have to be mounted lower than I want. So there may be little difference between mounting the fog lamps behind the grill and mounting the fog lamps where Toyota made space for them.
ellenbettyThread starterStow Ohio · Sep 5, 2009#22
One of the 2 Micro Image (Garm's) fog lamp kits I ordered has arrived. It looks slightly different than the photo displayed on Micro Image. The kit looks in order. Plus the extra things added by Micro Image to improve the kit are shown in my photo. My Mom is planning a trip to WV. Which would give me a empty parking space besides my Mom's modular home. While Garm recommends having someone who knows what they are doing install the foglamp kit, I may try to install parts of the kit myself. One post said that one Toyota dealer asked $400+ to install one foglamp kit. I would like to avoid adding $800 labor to my credit card to install 2 foglamp kits.

2 attachments not included in this copy

1NZYaris1New Zealand · Sep 5, 2009#23
Before you install , pm or email garm .
i have just updated the install instructions . to make it a little
easier .
👍
ellenbettyThread starterStow Ohio · Sep 5, 2009#24
Garm told me about the updated instructions. Garm said he would send me a email with the updated instructions. Maybe Garm will get around to sending me the email after mailing the second kit.
cali yarisCanoga Park, CA · Sep 6, 2009#25
Maybe Garm already did.
ellenbettyThread starterStow Ohio · Sep 6, 2009#26
I check my email several times a day. But not in the wee hours of the morning. (03:23 AM 😲 ). Some of us need our sleep.
ellenbettyThread starterStow Ohio · Sep 9, 2009#27
I decided to try to use the instructions to install the Vinjet fog lamp kit sold by Micro Image. There is a gap between the fog lamp and the plastic bumper insert. I question that a gap should be there. I may buy some glue or epoxy to fill in the gap. The improved instructions still are confusing. I had to guess how to use the wires that came with Rom's OEM Install kit. The instructions did not cover how to use the two red wire cross connectors. But I was able to figure out how to use those two red wire cross connectors to attach the wires to the switch to the yellow wire in the steering wheel. I went out and bought a box of one use push in panel plugs. The pop out plugs that are standard to hold the front bumper in place are too small for the holes on both sides of the bumper/wheel well overlap. So the larger one use push in plugs fit the holes better. The Vinjet kit has a lot of extra wire. I would guess that the wires are used in a number of kits.

Because of back problems I was unable to complete the install of the fog lamp kit today. But I did spent the morning having stripes put on my first Yaris.

One challange I will have to deal with is how install the on/off switch. The suggested place to install the switch will have to be cut out. The other choice is to buy a smaller switch that will fit in the push out slots in front of the AT shifter. The problem with that idea is that I do not know if the smaller switch will accept the electrical plug from the wiring kit.
1NZYaris1New Zealand · Sep 9, 2009#28
if you have problems please supply photo's so we can help you out .
as for switch place meant , it can fit in any of the OEM gaps , just remove the Plastic plugs first.👍
ellenbettyThread starterStow Ohio · Sep 10, 2009#29
Originally Posted by 1NZYaris1 ↑
if you have problems please supply photo's so we can help you out .
as for switch place meant , it can fit in any of the OEM gaps , just remove the Plastic plugs first.👍
I just removed the plastic plug. Even with outer cover removed, switch that came with kit is too large.

2 attachments not included in this copy

ellenbettyThread starterStow Ohio · Sep 10, 2009#30
Since I could not find a slightly smaller switch to fit into the slot, I decided to cut out some plastic around the sides of the slot. I removed the outer frame from the switch. I removed some of the plastic on three sides of the slot using a Dremel. But a metal file would do as well.

3 attachments not included in this copy

cali yarisCanoga Park, CA · Sep 10, 2009#31
that looks good, I did the same thing.
ellenbettyThread starterStow Ohio · Sep 10, 2009#32
Well I did something wrong. The fog lamps will not turn on.
1NZYaris1New Zealand · Sep 10, 2009#33
Turn your head lights onto park .
turn on foglight switch .
when you do that listen for a clicking sound coming from the relay .
and let us know .
ellenbettyThread starterStow Ohio · Sep 10, 2009#34
I heard nothing other than the nose the on/off switch makes. Since I also removed the DRL relay does that effect this kit?
1NZYaris1New Zealand · Sep 10, 2009#35
Yes , it could .
put relay back in .
if still no fog lights check the earth from the switch
or one of the 2 wires that you connected to the Pin3 wire on the stalk
is not making contact.👍
kuyachris84Illinois · Sep 11, 2009#36
keep us updated... i just ordered some clear fog lights from garm.

Hope it isn't hard to install

😁
1NZYaris1New Zealand · Sep 11, 2009#37
Originally Posted by kuyachris84 ↑
keep us updated... i just ordered some clear fog lights from garm.

Hope it isn't hard to install

😁

If you do have problems , Pm , or ask , only to happy to help out. 👍
ellenbettyThread starterStow Ohio · Sep 13, 2009#38
I got the fog lamps to work. I had to follow directions, cut the yellow wire in the steering column, and use connectors to make a connection. 🙄 At least one of the fog lamps bulbs lit, (I did not feel like checking the other, too tired), and the dash light for fog lamps on lit up. But I do have a problem. The switch to the fog lamps remains lit even if the key is out of the switch to the ignition. Makes me nervous.

Does any one have a idea of how long will it take for that light in the switch to drain my battery so much that I will not be able to start my Yaris?

Since I do not wish to find out the hard way what impact that light in the switch has on my battery, I unplugged the switch.
1NZYaris1New Zealand · Sep 13, 2009#39
Originally Posted by ellenbetty ↑
I got the fog lamps to work. I had to follow directions, cut the yellow wire in the steering column, and use connectors to make a connection. 🙄 At least one of the fog lamps bulbs lit, (I did not feel like checking the other, too tired), and the dash light for fog lamps on lit up. But I do have a problem. The switch to the fog lamps remains lit even if the key is out of the switch to the ignition. Makes me nervous.

Does any one have a idea of how long will it take for that light in the switch to drain my battery so much that I will not be able to start my Yaris?

Since I do not wish to find out the hard way what impact that light in the switch has on my battery, I unplugged the switch.
i think the simple answer is to swap the 2 wires around The Red and Yellow wire on your switch .
does your switch stay lite up even if it is turned off and park lights off .
ellenbettyThread starterStow Ohio · Sep 13, 2009#40
A long time is too vage. My Mom has problems with her Subrau starting if the Subrau is not started at least one a week and driven at least for 1/2 hour.

Since I have 2 Yarises, not driving both for a week or one for 2 weeks is something that some times occures. Is 2 weeks too long a time between starts?

Maybe I should rephase my question. Does any one know which wire to the fog lamp switch needs to be cut to kill that light? Will I need to install a second switch if I cut the wire to the light in the fog lamp switch?
1NZYaris1New Zealand · Sep 13, 2009#41
Originally Posted by ellenbetty ↑
A long time is too vage. My Mom has problems with her Subrau starting if the Subrau is not started at least one a week and driven at least for 1/2 hour.

Since I have 2 Yarises, not driving both for a week or one for 2 weeks is something that some times occures. Is 2 weeks too long a time between starts?

Maybe I should rephase my question. Does any one know which wire to the fog lamp switch needs to be cut to kill that light? Will I need to install a second switch if I cut the wire to the light in the fog lamp switch?
As above swap the 2 wires around 👍
ellenbettyThread starterStow Ohio · Sep 13, 2009#42
Originally Posted by 1NZYaris1 ↑
i think the simple answer is to swap the 2 wires around The Red and Yellow wire on your switch .
does your switch stay lite up even if it is turned off and park lights off .
The switch stays lit even when the key is removed and the head lights and the running lights are off.

I guess what you English (Sorry you folks down under) call park lights us Americans call running lights. 😆
ellenbettyThread starterStow Ohio · Sep 13, 2009#43
I am not certain which red and yellow wires you are talking about. Are you taking about switching two wires on the wiring harness?

Or are you talking about switching the wires connected to the cut yellow wire in the steering column?
1NZYaris1New Zealand · Sep 13, 2009#44
Originally Posted by ellenbetty ↑
I am not certain which red and yellow wires you are talking about. Are you taking about switching two wires on the wiring harness?

Or are you talking about switching the wires connected to the cut yellow wire in the steering column?
Yes switch the too wires that you put to the cut one .👍
ellenbettyThread starterStow Ohio · Sep 13, 2009#45
I do not understand why flipping those wires would turn off the light in the switch. All that does is reverse the flow of electrons through the switch. There is a circuit board behind the switch. Are you saying that that circuit board has a relay that is confused because of the direction the DC electric current is flowing?

I will give flipping the wires a try.
1NZYaris1New Zealand · Sep 13, 2009#46
Yes it will turn the LED off , if the switch is off .👍
RUFFSTUFFKINGSLAND, GA · Sep 13, 2009#47
Even so, you don't want that switch wired straight to your battery.
ellenbettyThread starterStow Ohio · Sep 14, 2009#48
Who said any thing about wiring that switch directly to the battery? I know what happens when you attach a 20 gage wire to the negative post of the battery and ground it. The wire vaporizes. I know that the cable coming from negative post of the battery is as thick as my small finger and is split into a number of wires to power the electrical system for the entire car with fuses to regulate how much power goes to each wire.
RUFFSTUFFKINGSLAND, GA · Sep 14, 2009#49
Originally Posted by ellenbetty ↑
Who said any thing about wiring that switch directly to the battery? I know what happens when you attach a 20 gage wire to the negative post of the battery and ground it. The wire vaporizes. I know that the cable coming from negative post of the battery is as thick as my small finger and is split into a number of wires to power the electrical system for the entire car with fuses to regulate how much power goes to each wire.

Well... let's see... If it lights up when the car is off then the power to light it comes from... (dramatic drum roll) the battery. The battery is the only source of electrical power in your car when it is not running, but I'm sure you know that. I didn't say anything about shorting out the battery with a wire. Chill out. BTW, fuses (and certainly auto fuses) don't regulate anything. They are just a cheap form of overcurrent protection.

I do like your reference to electron flow vs. hole flow though... 🤘
ellenbettyThread starterStow Ohio · Sep 14, 2009#50
O, is that what you meant. Of course there are hot wires even with the ignition off. Something has to power the clock, and power the emergency flashers, when the ignition switch is off.

I guess I did over state the function of auto fuses. Thickness of wires, a number of wires, a number of relays, a number of switches, a number of resistors, combined with a number of fuses attached to the wires, does divide the electrical flow and provide enough resistance to reduce power level coming from the negative terminal to a safe level for each wire.

I figure if all the power available in the battery have just 2 wires going to a single switch and 2 relays to hold back the current to those 2 fog lamp bulbs and 2 dash lights, those 2 wires would have to be a lot thicker than 18 gage to avoid being melted when I turn on the fog lamps.