Yarisworld Archive

Spring question?

29 posts · 6,197 views

jekqmbOriginal postSTL · Aug 17, 2009#1
Okay i think im going to give springs a shot on the yaris first...I like to go really low, but i decided i dont want coilovers..What spring lowers the car the most?
Thanks, Jake!

Replies 28

BrianRiverside, CA · Aug 17, 2009#2
The DFs or Progress I think are the lowest
lilredrocketDFW, Texas · Aug 17, 2009#3
Yep they are and make the cars stance great!!
jekqmbThread starterSTL · Aug 17, 2009#4
Okay, i bought Rota SA Racing rims 15x6.5...I probably should have got a wider wheel, maybe 15x7.5 or so and stretched the tires, but i figure im going to need something that really tucks these wheels in.....
cali yarisCanoga Park, CA · Aug 17, 2009#5
Tanabe DF210 will be lowest. You can use camber bolts (front) and shims (rear) to get extra tuck if you have any rubbing issues.

what offset are your wheels?
Kaotic LazagnaCentral Valley, CA · Aug 17, 2009#6
Really? I thought the Tein S.Tech's drop the LB 1.9" all the way around and the DF's were like 1.8" or something like that.
jekqmbThread starterSTL · Aug 17, 2009#7
Originally Posted by cali yaris ↑
Tanabe DF210 will be lowest. You can use camber bolts (front) and shims (rear) to get extra tuck if you have any rubbing issues.

what offset are your wheels?
40mm.....I called and they said these wheels would fit, will i have any issues with a 40mm offset? Im pretty sure i read the yaris is good with a 40-44mm offset or something like that? So what goes lower, Tein or the Tanabes?
lilredrocketDFW, Texas · Aug 18, 2009#8
My bad I keep forgeting about the tien's they are the lowest
jekqmbThread starterSTL · Aug 18, 2009#9
Okay thanks!
TamagoOff Grid · Aug 18, 2009#10
the DF's will sag much lower than the Teins.

progress tucks tire on an xD :D
Kaotic LazagnaCentral Valley, CA · Aug 18, 2009#11
Originally Posted by jekqmb ↑
40mm.....I called and they said these wheels would fit, will i have any issues with a 40mm offset? Im pretty sure i read the yaris is good with a 40-44mm offset or something like that? So what goes lower, Tein or the Tanabes?
I believe they should work fine with either Teins or the Tanabes. Also keep in mind that the S.Tech's have a higher spring rate in the rear, making for better handling characteristic on a fwd car like our Yaris. The Tanabe's have firmer spring rates in the front.
jekqmbThread starterSTL · Aug 18, 2009#12
Awesome thanks for the info guys...Im ordering either one tommorow, i want to see how the car feels at stock height after i pick her up at noon tommorow to see how low i want to go and how stiff i want my springs and say fairwell to my Redline as the dick salesman drives it away......Thank goodness all i have to do is go grab the keys for the yaris and drive off 👍
Kaotic LazagnaCentral Valley, CA · Aug 18, 2009#13
Why are you getting rid of the Redline anyway?

Anywho, you'll want the springs stiffer and the ride lower, trust me. hahahaha, Just take the Yaris on the freeway and feel the crosswinds. hahaha. When taking corners hard with the stock suspension, it'll make you sing http://www.youtube.com/watch?v=f3JpQDeqxnI

😆
jekqmbThread starterSTL · Aug 19, 2009#14
Originally Posted by Kaotic Lazagna ↑
Why are you getting rid of the Redline anyway?

Anywho, you'll want the springs stiffer and the ride lower, trust me. hahahaha, Just take the Yaris on the freeway and feel the crosswinds. hahaha. When taking corners hard with the stock suspension, it'll make you sing http://www.youtube.com/watch?v=f3JpQDeqxnI

😆
The redline has a bad MAF, bad fuel pump, Maybe a blown #4 ringland, bad clutch, diff pin is loose. Haha i just didnt want to fix it, plus its got lots O miles on it....Ran 3 different nitrous setups threw it. Its time to get something good on gas and im buying a 2.2 Eco Cavy in the spring to Turbo.😁
Kaotic LazagnaCentral Valley, CA · Aug 19, 2009#15
Ah, I would have gotten a Yaris as well.


hahahaha, you should throw on a Toyota emblem on that Cavalier and make it JDM. hehehe.
lilredrocketDFW, Texas · Aug 19, 2009#16
If you really want to stablize your ride get a rear sway bar!!! I can think of like 4 options out there: TRD one expensive, Ultra racing 19 and 23, and Raptor Racing came out with one. Those will really help you out!!
jekqmbThread starterSTL · Aug 19, 2009#17
Hey i was look at the UR ones, which one would be the best? 19 or 23?
mrbondIllinois · Aug 19, 2009#18
^23mm hands down. I tried both and the extra few millimeters makes a big difference. If you want to further add to rear stiffness and improve handling even more, spring for the Nitto rear lower tie brace at microimage. I love it.
lilredrocketDFW, Texas · Aug 19, 2009#19
What are you going to be doing with your car?
mrbondIllinois · Aug 19, 2009#20
Also, here's a thread of my car for you to look at. I've got Tanabe DF210's, and my wheels are 17" in case you wonder: My recent photoshoot
jekqmbThread starterSTL · Aug 19, 2009#21
Hey thx mr.bond, your car looks amazing! Well i really want to Auto-x it and im planning on taking it to the strip once i get the bottle hooked up and im shooting for low 15's, hehe. But so here is the deal, i got the TRD rear sway bar today and TRD springs. I didnt realize how low the yaris got when people are in it 😛
Im actually heading up to the store here in a few to buy an autometer mini tach and im painting my engine cover green.
jekqmbThread starterSTL · Aug 19, 2009#22
Are there any custom center pods you can buy for tachs?
mrbondIllinois · Aug 19, 2009#23
A small word of advice: when you take the back seats out of the car, the rear automatically raises up by almost an entire inch. If you look at my back wheels in that link I posted, you'll see that the tires are basically in line with the top of the wheel well. Now it's quite a bit higher than that. Just something to look for.
Btw, did you get my pm?
mrbondIllinois · Aug 19, 2009#24
Originally Posted by jekqmb ↑
Are there any custom center pods you can buy for tachs?
Yeah, look up "triple c, TRD" in the search menu. There's a member on here that's going to start making some of these, and I think they'd suit your needs pretty damn well.
jekqmbThread starterSTL · Aug 19, 2009#25
O ya i just got the PM, ill let ya know here tonight, im supposed to hear back from this kid who is supposed to buy my 60# injectors for $150.00 this evening.
jekqmbThread starterSTL · Aug 19, 2009#26
They need to make the PM box bigger, i didnt even know i had a PM
ern-dizCA all day · Aug 19, 2009#27
Originally Posted by mrbond ↑
A small word of advice: when you take the back seats out of the car, the rear automatically raises up by almost an entire inch. If you look at my back wheels in that link I posted, you'll see that the tires are basically in line with the top of the wheel well. Now it's quite a bit higher than that. Just something to look for.
Btw, did you get my pm?
is that rear bench really that heavy? i've been wanting to take out my rear seat since i got my car and just haven't gotten around to it but, if it makes that much of a difference then i won't do it until i get my coilovers and can adjust for the difference, if i do it at all...
mrbondIllinois · Aug 19, 2009#28
Well, I have the 60/40 seat, and they came out to about 115 pounds total. I don't know what the solid rear bench weighs, though, since they can't recline or slide forward and back.
cali yarisCanoga Park, CA · Aug 19, 2009#29
^ the bench seat is a little lighter, but it's still a significant difference. I measured 100 pounds even with the 60/40 plus the rear seat belts.