regalOriginal postPA · Aug 14, 2009#1If I were blind I could tell where the body shop painted my car just by the bumby feel. The color match and shine is good so I don't want to go and screw it up. No was a clay bar is going to remove this over sray.
I think it is going to have to be wetsanded with 2000m grit then polished. Thats where I get lost, over on Autotopia there are so many different schemes for polishing I can't keep them straight.
In my aresnal I have:
Chemical Guys Blue Elastic Clay Bar
Dewalt polisher (I am terrible at leaving swirl marks withis hing)
6.5 in wool pad for theDewalt
Porter Cable Random Orbial)
Pinnacle #4 polish
Pinnacle #1 Polish
Orange, White, Nad Black LK 6.5" pads
Klasse AIO
Klass SW soom to be replaced with Colinite 476
Various Caranuba astes.
What procedure would you use to get rid of the clear overspray and have my car as smooth as glass?
Replies 7
mrbondIllinois · Aug 14, 2009#2I'd like to know this too, since the ass that did my lip kit and spoiler left the same crap.
BrianRiverside, CA · Aug 14, 2009#3Take it back to the shop and they usually fix it for free.
regalThread starterPA · Aug 14, 2009#4Well the body shop is a 2 hr drive there and 2 hr back, I figured I could make this part of jeweling the whole car with the overprayed areas treated different.
rob323Joyner, Brisbane · Aug 16, 2009#5To get rid of the overspray on my car, I hit it lightly with 2000 grit lubed up with soapy water, then cut it with Farecla G3 and a powered polisher.
It took the best part of a whole weekend to do and was NOT fun.
(This was on the clear coat).
JetfireKSlidell, LA · Aug 17, 2009#6 Originally Posted by
regal ↑ If I were blind I could tell where the body shop painted my car just by the bumby feel. The color match and shine is good so I don't want to go and screw it up. No was a clay bar is going to remove this over sray. I think it is going to have to be wetsanded with 2000m grit then polished. Thats where I get lost, over on Autotopia there are so many different schemes for polishing I can't keep them straight.In my aresnal I have:Chemical Guys Blue Elastic Clay Bar
Dewalt polisher (I am terrible at leaving swirl marks withis hing)
6.5 in wool pad for theDewalt
Porter Cable Random Orbial)
Pinnacle #4 polish
Pinnacle #1 Polish
Orange, White, Nad Black LK 6.5" pads
Klasse AIO
Klass SW soom to be replaced with Colinite 476
Various Caranuba astes.
What procedure would you use to get rid of the clear overspray and have my car as smooth as glass?
Let a professional shop paint your car and if it comes out as you say, don't pay them until it is done right. Also I would never use a power polisher on my paint. I find Toyota Paint looks good but is thin ...Just use Elbow Grease...try Nu Finish....easy to apply shines nicely and lasts they say for a year but I do mine every three months...for protection
counterfiendDallas, tx · Aug 18, 2009#7An aggressive clay bar will pull the overspray off the car. But it also depends on how much obverspray there is. If it just feels rough, then the claybar will work fine. The aggressive clay will leave light scratch's in the paint, so you will want to go over the areas you clay with a mild polish on the porter cable.
In the process of basically doing this to 37 cars that got some overspray from foam insulation at a business next to theirs. So. It should work fine.
mrbondIllinois · Aug 19, 2009#8Hey Regal, I think I may have found your solution. Now, the lip kit I just had painted felt like 2000 grit sandpaper all around, and that's not an exaggeration. After losing my patience with just using paste wax, I decided to try something new. I went out and bought Meguiar's Ultimate Compound (G17216) and a new clay bar by Mother's. I spent like two hours last night going over each lip and skirt with three cycles of Meguiar's Ultimate Compound, Meguiar's Scratch-X (which I already had laying around), Mother's, wash, repeat and now they all feel super smooth. It took a while and cost me $24 after tax and whatnot, but damn what a difference! I recommend trying this before wet sanding and all of that. Let me know how it works for you.