AdeJong 03Original postLA, CA · Aug 12, 2009#1hey guys i am looking into possibly test fitting some fender flares on my 09 sedan but i was wondering if anyone has done this before and has pics?
from what i understand if you take 2 pairs of front fender flares from the scion xb then they should fit. i think that might work for the lb but i am concerned about sedan fitment. id like to run some wide wheels but i want the flares to fit correctly
i am trying to achieve something subtle like this
Picture not included in this copy
i noticed the rear flares are a 2 piece with part of the flare being on the door itself.
is there a company that is interested in fabbing flares for the yaris? i feel like there would be a good amount of people interested in these if they were available
Replies 26
AdeJong 03Thread starterLA, CA · Aug 12, 2009#22 good examples of xb flares
Picture not included in this copy
Picture not included in this copy
AdeJong 03Thread starterLA, CA · Aug 12, 2009#3one more interesting pic
this wagon is test fitting the rear flare from the xB. and its kinda close. doesnt accomodate the larger wheel well though
Picture not included in this copy Originally Posted by Shagon Wagon ↑
Mine are actually off a Scion XB.. just bought the rears off a friend of mine. They are not a perfect fit as you can see. My body shop is gonna do a little cutting and adding fiberglass to make them perfect. I like these because they arent as "bubbly" as the prototype one's and not as long<---> front to rear
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
LEGATO``Virginia Beach · Aug 12, 2009#4 Originally Posted by echo_hrs ↑
I can't stand the exposed rivets, they ruin the flares for me...
Cheers
+1
might as well get a full custom wide body kit IMO
RHDVIPbBLouisville, KY · Aug 12, 2009#5They are very close. I have my old set still in storage. I test fit one when I first got the car. I can dig it out again and get a pic for reference. I am going a different route though. I plan to eventually get my rims mounted and then do a slight pull on the fenders for fitment.
As for the rivets.....I was going to have them bolted/riveted on and then mold them into the body. I did it once before and they looked so much better.
JumpmanYarisSO. INDIANA · Aug 12, 2009#6mmmmm how would it look?!?!?
laszloventura cal · Aug 13, 2009#7i did the xb flares on my 2007 yaris hatch i will see if there is any pics
but i loved it
YarisSedanCalifornia - Bay Area · Aug 13, 2009#8yeah the rivets make it plain ugly.
RHDVIPbBLouisville, KY · Aug 13, 2009#9The front ones look good on the Yaris. The rears will require just some trimming since the lines are different on the back doors (at least on the sedan).
AdeJong 03Thread starterLA, CA · Aug 13, 2009#10id love to see someone post some pics!
i decided to go with a difference route myself because i started remembering how annoying it was to wash my old miata that i flared
Picture not included in this copy
Picture not included in this copy
cali yarisCanoga Park, CA · Aug 13, 2009#11 from what i understand if you take 2 pairs of front fender flares from the scion xb then they should fit.
My idea! These were available and no one bought them. 🙁
Laszlo has the set on his car -NO RIVETS, in carbon fiber, mmmmm.
PHXDEMONPhoenix, AZ · Aug 13, 2009#12 Originally Posted by echo_hrs ↑
I can't stand the exposed rivets, they ruin the flares for me...
Cheers
Word. Exposed rivets look tacky as hell 🙁
mshekletonNew Jersey · Apr 21, 2010#13 Originally Posted by
PHXDEMON ↑ Word. Exposed rivets look tacky as hell 🙁
meh... I disagree. I think it looks raw and awesome. To each his own.
Kaotic LazagnaCentral Valley, CA · Apr 21, 2010#14Whoa, bumped up from the dead.
MouseMiami, Fl. · Apr 21, 2010#15I dig the rivets too
cali yarisCanoga Park, CA · Apr 22, 2010#16funny this thread would come up now, I'm putting flares on my own car here pretty soon. Just sorting out the wheel/tire/offset part first, so I know how much fender to trim. 😲
mshekletonNew Jersey · Apr 22, 2010#17 Originally Posted by
cali yaris ↑ funny this thread would come up now, I'm putting flares on my own car here pretty soon. Just sorting out the wheel/tire/offset part first, so I know how much fender to trim. 😲
Yeah, I'm looking at putting some in so I can fit some fatter tires and bring the suspension down a bit. Where did you get yours?
cali yarisCanoga Park, CA · Apr 22, 2010#18I sell them. 😉
AND189australia · Apr 22, 2010#19mshekleton
eah, I'm looking at putting some in so I can fit some fatter tires and bring the suspension down a bit. Where did you get yours?
cali yaris
I sell them.
ha ha nice
AdeJong 03Thread starterLA, CA · Apr 22, 2010#20cant wait to see how theyre gonna look on your car garm. the black and white color scheme should look amazing
cali yarisCanoga Park, CA · Apr 22, 2010#21hope so, but I have to trim the rears for the sideskirt and rear bumper. Waiting to finalize the SP1 specs, then we'll do them.
Probably will be done for ToyotaFest (crossing fingers)
PinchliteBarrie Canada · Oct 14, 2019#22Did you ever get around to cut and install flares on the yaris.
I found 50mm flares that match the curve of the yaris,meaning they sit flush at bottom of wheel well.I will trim shorter to rest on the top of the Kaminari skirt.I will use larger spacers or get lower offset wheels.
I am dropped with stechs and want to trim metal and use spacers.The flares will be color matched.Front and back are both 50mm flares.
My wheels are currently 16x7 40 offset with 10mm spacer back.
I have seen flares on some gti's and it looks amazing.My only issue is the tire hitting metal fender lip even after cut.Not sure how much travel the suspension has?
sickpuppy1Kansas · Oct 23, 2019#23LMAO the last post before yours was 9 YEARS ago.......just sayin....
PinchliteBarrie Canada · Oct 23, 2019#24Worth a try.Perhaps he could still proide some info?
WeeYariGeorgetown, Ontario, Canada · Oct 23, 2019#25You'll get no response from him here.
This is the car in its last known state.
Picture not included in this copy
ern-dizCA all day · Oct 24, 2019#26Car hasn't been with him in a long time. I still text Garm from time to time, he's working on some really interesting rides these days. He also has an Instagram account, but doesn't seem to be very active on it.
PinchliteBarrie Canada · Nov 5, 2019#27Thanks for the reply.
I see the fenders are not cut.Not what I had in mind.In the future I may cut and use 50mm flares with spacers.I have seen some GTI'S and golf like this and it looks amazing.
For know I have 17x8.25 25+ and will be mildly stretching a tire,probaly 205/45.
I got these same wheels here..
My build thread! 07 HB