Yarisworld Archive

Painted my Engine Cover

5 posts · 3,589 views

Blue_dragon_192Original postFlorida · Aug 9, 2009#1
Here are the pics.
I tried to stay simple and make it clean looking.


Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Blue

Replies 4

yaris-meAnaheim, CA · Aug 10, 2009#2
Nice.
Blue_dragon_192Thread starterFlorida · Aug 10, 2009#3
Originally Posted by echo_hrs ↑
I think it could benefit from a nice fine wet sanding, and another shot of clear...

Cheers
I think you are right.
supmetSouthern California · Aug 10, 2009#4
Did you use house paint or something?? I'm scared to paint mine now.....
Blue_dragon_192Thread starterFlorida · Aug 10, 2009#5
Originally Posted by supmet ↑
Did you use house paint or something?? I'm scared to paint mine now.....
House paint???? Not sure what you you are referring to.

I wet sanded the entire cover with 400 grit sand paper.
cleaned it and wiped it down with a tack cloth.
Sprayed it down with adhesion promoter and let it dry.
Then I sprayed it with Red Engine Enamel (gloss).
I wet sanded it down with 400 grit paper again, and then sprayed it with the engine enamel again.
I hand painted the black on the VVT-I and logo with gloss black.
I also sanded the nuts that hold the cover down and sprayed it with flat black and then clear (not high temp paint).

I like the orange peal look on the cover because it still makes it look plastic, like it was from the factory (in a sense).
Blue.

EDIT: Looked at my original photos and the Auto setting just did not do well, I will take pictures in daylight. I took the pictures at night in the garage.....