Yarisworld Archive

RacerFreakXXX Meteorite Metallic HB

26 posts · 10,625 views

RacerFreakXXXOriginal postSomers NY · Aug 8, 2009#1
Finally took some pics of my new yaris 😁 I have a few mods so far, nothing fancy

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy


After looking at the pics and seeing how fugly the stock offset and height was, I decided to debadge my car.


Picture not included in this copy
Picture not included in this copy
Picture not included in this copy


After a good wash, I added my New Vitz badging. The only problem was that I had to remove the front bumper to put the front one on. I had no time to remove the bumper today so I'll do that on my next day off.


Picture not included in this copy
Picture not included in this copy

Replies 25

kacWest/Central Illinois · Aug 8, 2009#2
Lovin' the vitz badges, mine will be here in a few days. Nice car, i like the knob. Plenty of room for more mods in the future as well....
cali yarisCanoga Park, CA · Aug 8, 2009#3
👏 well done!
blacksandiegovitzJust chillin' out brah ! · Aug 8, 2009#4
You dont have to remove the front bumper to remove the front logo Imo. Just get a pair of channel locks wrap the "jaws" in tape(to prevent scratching the old toyota logo) and just grab the logo with the channel locks and give it a quick/strong tug stright back away from the bumper and it will pop right out and not mess anything up . Then just click the new netz logo in . Take about 1 minute to do .
90tsimissouri · Aug 8, 2009#5
i was able to take my grill emblem off without the pliers and removing the front bumper. hell i just did it 20mins ago. i think it took me 5mins.
RacerFreakXXXThread starterSomers NY · Aug 8, 2009#6
did you just pull it off... I cant seem to find a way to get my hands or fingers behind the grill so I can pop it out
90tsimissouri · Aug 8, 2009#7
jack the car up, reach up back side of the bumper(after splash guard is off) theres 2 little tabs u just push up on it pops right out. i say all this but im kinda of a small guy so I have put alot of parts on other people have removed different things to reach.
RacerFreakXXXThread starterSomers NY · Aug 8, 2009#8
yay I did it, what a bitch, now I have to put everything back together
auxmikeLI, New Yawk · Aug 8, 2009#9
I'm 6ft, 210Lbs and I just jammed my pinkys into the lower rt/lft holes below the emblem and pushed the tabs. Presto!
DON'T rip off the whole front of the car for that. DO remove the front bumper to do the foglights you will want very soon. 😁
auxmikeLI, New Yawk · Aug 8, 2009#10
Originally Posted by RacerFreakXXX ↑
did you just pull it off... I cant seem to find a way to get my hands or fingers behind the grill so I can pop it out
Hey question. There's pins on the back of the rear Toyota emblem? Looks like two holes. Now I'm glad I did'nt do a full debadge, would've left holes!
PS: where did you get the Vitz/Netz stuff at?
RacerFreakXXXThread starterSomers NY · Aug 8, 2009#11
Originally Posted by auxmike ↑
Hey question. There's pins on the back of the rear Toyota emblem? Looks like two holes. Now I'm glad I did'nt do a full debadge, would've left holes!
PS: where did you get the Vitz/Netz stuff at?
yes there are two holes on the rear badge on the 09 at least. The badge is stickied on and clipped on. I had to use fishing line to remove most of the sticky stuf and it kept breaking when it hit the clip. So I decided to just pry it off with my fingers and realized it had clips.

Who else does everyone get their jdm badging from, Garm(cali yaris) of course 👍

I'm 5'8" and have long skinny arms and fingers and I still couldn't do that. Removing the mid under-pannel was a pain in the a$$ but it got the job done. I also did a little wight reduction while I was at it, no more than 2lbs at most, rofl.


Before & After:

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy


Picture not included in this copy
Picture not included in this copy


Picture not included in this copy
Picture not included in this copy
auxmikeLI, New Yawk · Aug 9, 2009#12
Whatcha gonna do with the engine cover?
Also, is that the jack cover I see?
RacerFreakXXXThread starterSomers NY · Aug 9, 2009#13
Engine cover is just going to sit around and yes that is the jack cover. I moved the jack to one of the foam compartments by the spare. Makes more sense to put it there.

Engine covers are gross imo... I have to find a valve cover and paint it and swap it with my current one. I may just polish it, nothing like a nice polished valve cover 😁
RacerFreakXXXThread starterSomers NY · Oct 11, 2009#14
Some more pics of my baby with a new license plate 😁

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

Picture not included in this copy
Picture not included in this copy
AdeJong 03LA, CA · Oct 11, 2009#15
looking good!

good thing you ditched the new driver badge. those things arent actually "cool" in japan
yarisugiハワイ · Oct 12, 2009#16
Looked like a perfect day for picture taking.
Does the Broadway mirror interfere with the visors when the visors are down?
RacerFreakXXXThread starterSomers NY · Oct 12, 2009#17
nope it's a 270mm and works great... it gets annoying at night but I deal.
hatchbackkid82. · Oct 28, 2009#18
Is that the stock shift boot?
yaris-meAnaheim, CA · Oct 28, 2009#19
Good job. What's next?👍
THE ONEGT · Oct 28, 2009#20
Nice!!! 👍

Well done with the Vitz badges...

Love the Soshinoya btw... 👍
RacerFreakXXXThread starterSomers NY · Oct 28, 2009#21
Originally Posted by hatchbackkid82 ↑
Is that the stock shift boot?
Actually it is, I see no reason to change it other than the material being a little tacky.

What's next... first it's going to be wheels and coilovers or lowering springs and struts. Then my big project... custom hks turbo, found a place to build a custome intercooler and another shop for a downpipe. I'm thinking summer/ fall it will be done. I'll just need to find somone to tune the car.
kacWest/Central Illinois · May 2, 2010#23
how the broadway mirror get annoying at night? It looks nice, I might order one...
toy_torontoTarrana, Canada · May 2, 2010#24
Originally Posted by RacerFreakXXX ↑
Some more pics of my baby with a new license plate 😁

Picture not included in this copy
Nice Vitz RacerFreak.. now get some nice wheels! I just got mine installed on my meteorite metallic.

wut a huuuuuge difference 🙂

Picture not included in this copy
RacerFreakXXXThread starterSomers NY · May 3, 2010#25
kac - I love the mirror and it's not too bad at night.

toy_toronto - Thank you. I just installed springs, struts, spacers, and a sway bar. I have a exhaust on it's way and wheels are next. I just need to decide what size wheel I want, lol.
RacerFreakXXXThread starterSomers NY · May 6, 2010#26
My little Vitz dropped

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy