PETERPOOPOriginal postOahu · Aug 6, 2009#1Can a 17x9" +35 offset wheel fit in the rear? Or is the offset too low?
Definately would need the fenders rolled? Correct?
Or could a 18x8.5" +38 offset fit for sure? Also with fenders rolled.
Also, what kind of tire would be needed?
Thanks!
Replies 38
lilredrocketDFW, Texas · Aug 6, 2009#2Just wondering why you want to run something that wide on the rear? I figured you would want something wider on the front for 2 reasons 1 bing we have front wheel drive cars and 2 you have a s/c putting all that extra 30+ hp. If I'm not mistaken you are also running the 13mm PG hub spacers that might be some good info to add to your first post
Kaotic LazagnaCentral Valley, CA · Aug 6, 2009#3I think he's trying to go for a "hella flush" look. Like they say, if you're not rubbing, you're not flush enough. 😆
cali yarisCanoga Park, CA · Aug 6, 2009#4peterpoop, I have dibs on the SSR's if you get rid of them.
CtrlAltDefeatIndianapolis IN · Aug 6, 2009#5 Originally Posted by
cali yaris ↑ peterpoop, I have dibs on the SSR's if you get rid of them.
damn, beat me to it 😁 but I can't realistically afford them right now or the shipping from Hawaii 😢
PETERPOOPThread starterOahu · Aug 6, 2009#6lol. im obviously not getting them for performance. sorry garm, i would keep the SSRs until I die; or the yaris dies. the wheels i am looking at have a nice lip and was just curious about those wheel sizes and if they would fit. i would obviously also be getting a wider wheel in the front.
Originally Posted by
lilredrocket ↑ that might be some good info to add to your first post
they would obviously be removed. 😉
Kaotic LazagnaCentral Valley, CA · Aug 6, 2009#7 Originally Posted by
PETERPOOP ↑ lol. im obviously not getting them for performance. sorry garm, i would keep the SSRs until I die; or the yaris dies. the wheels i am looking at have a nice lip and was just curious about those wheel sizes and if they would fit. i would obviously also be getting a wider wheel in the front.
they would obviously be removed. 😉
lol, so they are for a flushed-look then. I say do it anyway, regardless of fitment. You can be in the Wrong Fitment Crew. hehehe.
PETERPOOPThread starterOahu · Aug 6, 2009#8well i always loved wheels with a nice lip. I don't mind the staggered look on a yaris; even though it's retarded because the yaris is FWD.
Here is the wheel and it's different sizes. I know the brand is crap, but it's the only wheel that offers the kind of lip i'm looking for and that has a design i like. If i got the wheels, i'd definately need to black out the center caps. :P
http://www.nlmotoring.com/XXR-Wheels-962-s/48.htm Picture not included in this copy Kaotic LazagnaCentral Valley, CA · Aug 6, 2009#9I don't think Sportmax is that crappy of a brand. I was about to get the 039's actually.
Your choice is very nice. I love that lip!
contraband831CEN*CAL · Aug 6, 2009#10i think you may still need a 5mm spacer (maybe smaller??) in the rear (since you may rub on the shock, the front wheels on that set up are 17 x 7 so those are fine. I say go for it, I was looking at the same wheel, but in gold with a polished lip.
HELLAFLUSH FTW!
http://fatlace.com/hellaflush/ PETERPOOPThread starterOahu · Aug 6, 2009#11Yah I know the 17x7 +40 would work up front. It was just the question of the 17x9 +35 in the rear. I doubt it could fit.
Also, I wouldn't buy these if i was only to run the 17x7 +40 all around.
And what about the 18x7.5 +38 offset. Could that work on the front? If so, i'd like to run the 18x8.5 +38 in the rear... err
But I don't know what size tire to run with these? And I don't like that stretched tire look either.
Kaotic LazagnaCentral Valley, CA · Aug 6, 2009#12How about a subtle stretch?
PETERPOOPThread starterOahu · Aug 6, 2009#13lol. yah, subtle is fine. nothing crazy, and you know what i'm talking about!
ps: I really am not looking for that "hella flush" look or "vip" look. Just want a nice wide wheel with a good lip. 😕
i like this....
Picture not included in this copy
and don't want it to look like this....
Picture not included in this copy
Kaotic LazagnaCentral Valley, CA · Aug 6, 2009#14I like the fitment on the 8. On that sedan, there's too much poke for me. That's Wrong Fitment Crew status. hahaha.
contraband831CEN*CAL · Aug 6, 2009#15the 8 is flush, so you are looking for the hellaflush look; you just don't want to be called hellaflush, how about HellaPoop. lol...
well i hope you find the wheel and look you are going for.
yarisugiハワイ · Aug 6, 2009#16For a 8.5" you'd need it to be +45 to +50 offset. For a 9" make it +48 to +52.
It would sit "flush", but 100% rub on fender - yes, a fender roll and pull required if you don't want rub.
Beware of inner fender/strut if going that wide.
Good luck!
I love lips.
PETERPOOPThread starterOahu · Aug 6, 2009#17ok, well how about the 18x7.5" +38 offset? Could I manage that all around?
yarisugiハワイ · Aug 6, 2009#18It'll stick out of the fender a bit - probably less than an inch.
PETERPOOPThread starterOahu · Aug 6, 2009#19but how would the turning be up front if i rolled the fenders? Still rubbing?
yarisugiハワイ · Aug 7, 2009#20Rolling the fenders would give you clearance on the top part of your fender, but if the wheel is too big in diameter the edge of the fender where it meets the bumper may rub when you turn, but judging from some Yaris here with 18" rims, there doesn't seem to be any problems... yet?
contraband831CEN*CAL · Aug 7, 2009#21turning full wheel lock would be the only issue but that would happen rarely (u-turns...etc), the TRD wheels are 18x7.5 et42 so by rolling the fender and a little camber you will have no poke what so ever with the 18's you want.
TaiyakiHonolulu, HI · Aug 9, 2009#22I was eye out some 18x8 but was worried about rub. But I have NFs, I read somewhere that someone had 18 with NFs and had no rub. I just dont know how wide it was. Anyone think it will be a problem?
yarisugiハワイ · Aug 10, 2009#2318x8 - depending on the offset. +42 to +45 would still be OK I think.
TaiyakiHonolulu, HI · Aug 10, 2009#24offset is +40 ><;;
Penguin GarageFL · Aug 10, 2009#25it really depends on tire choice.
a 205 at +40mm offset and a 8" wheel will have less fitment issues then a 225 at +45mm offset on a 7.5" wheel.
you can run a 205 at +35mm in the front and the tire is pretty flush with some camber.
there isn't alot of fender to "roll" on a Yaris Hatch, you'll be pulling the fender.
also i'd suggest massaging the fender lines in the front and the bumper attachment points in the rear.
remember to run "aggressive" fitments you have to be ready to do the work to make them fit. These aren't "bolt-on" per say.
yarisugiハワイ · Aug 10, 2009#26Don't worry Taiyaki +40 is not far from +42. Like Penguin Garage said, tire size also makes a difference.
TaiyakiHonolulu, HI · Aug 12, 2009#27Its has 215/35's
So what do you think guys? will it work without rub (or not that much rub)
kngrsllSpartanburg, SC · Aug 12, 2009#28I have a 15x7 +25 wheel offset. there was NO rubbing. I installed 10 mm PG spacers (making the wheel an effective 15x7 +15) and there is now rubbing.
the 9" +35 wheel extends 15mm more than the 15x7 +25 wheel, so it will rub.
the 7.5" +38 wheel is 7mm closer to the body of the car than the 15x7 +25 thus it will NOT rub.
kid chinoEdmonton, AB · Aug 12, 2009#29Have you seen my thread, I got xxr 504's 18x8 +32 offset all around as this is the only size available in this wheel. I believe the lip is a gigantic 3.5" all wrapped in 215/35's. The back sits perfectly flush for my liking with a little rubbing when going over bumps at faster speeds, the front would fit better with a +35 offset probably as it sticks out beyond the fender a 1/4 of an inch or so, it does not rub at all. Also i would have liked to have gone with 225/35 tires to protect the lip of the rim better however i'm positive i would have encountered alot of rubbing issues. All this dropped on trd's 1.2 all around. So to sum up I think any wheel/tire combo bigger or wider than this you will for sure have major rubbing issues without fender modification. Hope this helps.
09 rs new pics/mods kngrsllSpartanburg, SC · Aug 12, 2009#30 Originally Posted by
kid chino ↑ Have you seen my thread, I got xxr 504's 18x8 +32 offset all around as this is the only size available in this wheel. I believe the lip is a gigantic 3.5" all wrapped in 215/35's. The back sits perfectly flush for my liking with a little rubbing when going over bumps at faster speeds, the front would fit better with a +35 offset probably as it sticks out beyond the fender a 1/4 of an inch or so, it does not rub at all. Also i would have liked to have gone with 225/35 tires to protect the lip of the rim better however i'm positive i would have encountered alot of rubbing issues. All this dropped on trd's 1.2 all around. So to sum up I think any wheel/tire combo bigger or wider than this you will for sure have major rubbing issues without fender modification. Hope this helps.
09 rs new pics/mods
what you say makes sense. your setup is 6mm wider than mine. i have no rubbing, you say you have light rubbing. the spacers are 10 mm wider than my previous set up, which is 4mm wider than your current set up and has heavy rubbing.
so the maximum offset is somewhere between 15x7 +25 to +30, or with an 8, it is about +33 to +38.
TaiyakiHonolulu, HI · Aug 12, 2009#31 Have you seen my thread, I got xxr 504's 18x8 +32 offset all around as this is the only size available in this wheel. I believe the lip is a gigantic 3.5" all wrapped in 215/35's. The back sits perfectly flush for my liking with a little rubbing when going over bumps at faster speeds, the front would fit better with a +35 offset probably as it sticks out beyond the fender a 1/4 of an inch or so, it does not rub at all. Also i would have liked to have gone with 225/35 tires to protect the lip of the rim better however i'm positive i would have encountered alot of rubbing issues. All this dropped on trd's 1.2 all around. So to sum up I think any wheel/tire combo bigger or wider than this you will for sure have major rubbing issues without fender modification. Hope this helps.
Thanks it helps alot, Now im getting the new wheels for sure~ haha
katchkillahRock in the Middle of the Lake · Sep 2, 2009#32well peterpoop what did you end up doing? i'm curious as i was debating with 17 or 18's and of course not going for the power direction just straight looks since the car only goes from home to work on all residential areas. but all in all it's always the tires that are the cause of rubbing. lol
PETERPOOPThread starterOahu · Sep 2, 2009#33hey. well i ended up saying "screw it" and I never got the wheels. however, i did find wheels that i wanted to get, but they weren't 9" wide or even 8". They were going to be 18 x 7.5" +42 with a 2.25" lip. But yah, sorry, no helpful information here.
katchkillahRock in the Middle of the Lake · Sep 2, 2009#34no problems. maybe i'll try put on my 8.5's when i finally order my yaris and see how it goes. ;)
PETERPOOPThread starterOahu · Sep 2, 2009#35That'd be nice. I hope it fits. I don't think anyone is running a 8.5" wide wheel.
katchkillahRock in the Middle of the Lake · Sep 2, 2009#36just curious what is the widest anyone is using.
TamagoOff Grid · Sep 4, 2009#37katchkillahRock in the Middle of the Lake · Sep 4, 2009#38lol that get too many numbers and words now my head hurts and it's the beginning of a long weekend.
TamagoOff Grid · Sep 4, 2009#39 Originally Posted by
katchkillah ↑ lol that get too many numbers and words now my head hurts and it's the beginning of a long weekend.
bottom line, they should fit.