Yarisworld Archive

Engine Immobilizer p/n

6 posts · 5,635 views

Reeves360Original postOlympia, WA · Aug 4, 2009#1
Anyone have the Engine Immobilizer p/n('s) that you would need in order to add this feature to your Yaris?

Replies 5

CTScottUSA, CT · Aug 4, 2009#2
Amplifier, Transponder Key: 89783-71021
Computer Assy, Transponder Key: 89780-52061
Reeves360Thread starterOlympia, WA · Aug 18, 2009#3
Originally Posted by CTScott ↑
Amplifier, Transponder Key: 89783-71021
Computer Assy, Transponder Key: 89780-52061
Any ideas if it's plug and play? Similar to the VIP RS3200 System? I don't mind swapping wires out of a harness to get things working I just need a little bit of direction.

🙂
CTScottUSA, CT · Aug 18, 2009#4
The ECM is the same with or without the immobilizer system. I believe that it's just those two parts and the wiring between them and the three wires to the ECM.
Reeves360Thread starterOlympia, WA · Aug 24, 2009#5
It sounds like the wires might already be included in the factory harness and you could just plug in the two parts and not have to run any wires to the ECU???

🤷

I'll check into the 09 Sedan wiring diagram section for the alarm and see if this information is included.
CTScottUSA, CT · Aug 24, 2009#6
Just check your steering column to see if there is a black 7 pin connector sitting near the key switch and not connected. It will have 4 wires - pink, green, purple and gray.