Yarisworld Archive

NEED HELP

29 posts · 5,493 views

JumpmanYarisOriginal postSO. INDIANA · Jul 29, 2009#1
I tried to change the turning signal lights puting 2057LED insted of 992(7440A) wich are the one for it Well now my turning signals are not working at all or the hazard ones ANYONE KNOWS WHY?Could it be a Fuse? But where is the Fuse box and what fuse is it?

Replies 28

ShroomsterOrlando · Jul 29, 2009#2
when you say you tried to replace it, do you mean you put the old ones back in after the new ones didn't work?
LEGATO``Virginia Beach · Jul 29, 2009#3
Originally Posted by Shroomster ↑
when you say you tried to replace it, do you mean you put the old ones back in after the new ones didn't work?

try what he said
put the old ones back, and if that doesnt work, then it might be the fuse
JumpmanYarisThread starterSO. INDIANA · Jul 29, 2009#4
I did try that to but i was replacing the left side and the right side isnt working
ShroomsterOrlando · Jul 30, 2009#5
there is no light from any corner of the car when you flip the hazards?

highly unlikely that you popped a fuse as the bulb itself acts like a fuse to begin with, but if you reinstalled the original bulbs then yeah check the fuses.
JumpmanYarisThread starterSO. INDIANA · Jul 30, 2009#6
Yup I tried switching the bulb to the original and the led one as well and no results I need to find where is the fuse so I can check them if not... as much as I dont want to im gonna have to take it to Toyota
CTScottUSA, CT · Jul 30, 2009#7
It's the 10A one labeled "TAIL" in the fuse panel that is up under the dash (i.e. the one you put your head on the brake pedal to see).
CTScottUSA, CT · Jul 30, 2009#8
A 2057 is a bayonet mount and a 7440A is a wedge mount.

Out of curiosity, how did you install it?
SaerinRhoeDallas, Texas · Jul 30, 2009#9
With duct tape and bailing wire.

😁

Just trying to add some humor.

S.R.
JumpmanYarisThread starterSO. INDIANA · Jul 30, 2009#10
Originally Posted by CTScott ↑
A 2057 is a bayonet mount and a 7440A is a wedge mount.

Out of curiosity, how did you install it?
Well its the tail lights from Garm so the bulbchanges its not the same plug that the original taillights comes with
CTScottUSA, CT · Jul 30, 2009#11
Originally Posted by JumpmanYaris ↑
Well its the tail lights from Garm so the bulbchanges its not the same plug that the original taillights comes with
OK. So you had the rewire to connect up the new lights, and at the same time you were changing the new ones to LEDs?

Did you find that the fuse was popped?
JumpmanYarisThread starterSO. INDIANA · Jul 30, 2009#12
I havent checked to much work I will try and see wich one and where it is I will post some pictures of the plug for the bulb so you can see.
Yes its all rewired but they been working for almost a year and now that I wanted them LED amber lights this crap happens

I PRAY TO GOD IT'S JUST A MESSED UP FUSE!!😠
CTScottUSA, CT · Jul 30, 2009#13
Originally Posted by JumpmanYaris ↑
I havent checked to much work I will try and see wich one and where it is I will post some pictures of the plug for the bulb so you can see.
I PRAY TO GOD IT'S JUST A MESSED UP FUSE!!😠
The lighting circuits are well protected, so I would almost guarantee that it's the fuse.
JumpmanYarisThread starterSO. INDIANA · Jul 30, 2009#14
hopefully...
JumpmanYarisThread starterSO. INDIANA · Jul 31, 2009#15
Here are the picture i took some of them off and checked them the ones i did are good the thing is wich one is tha one for the signals?!?!🤷

2 attachments not included in this copy

CTScottUSA, CT · Jul 31, 2009#16
The 10A one at the bottom left of your picture is the tail light fuse if you are working on a liftback.

By the way, I'm not digging that white wire stuffed in the meter fuse. I don't think it's part of your current problem, but it's not a good way of doing things...
JumpmanYarisThread starterSO. INDIANA · Jul 31, 2009#17
Originally Posted by CTScott ↑
The 10A one at the bottom left of your picture is the tail light fuse if you are working on a liftback.

By the way, I'm not digging that white wire stuffed in the meter fuse. I don't think it's part of your current problem, but it's not a good way of doing things...
Its the sedan but ill go check reall fast as far as that wire i got jack clue what it is it could be from when they installed the Remote Control or the Sound system i could be wrong thats the only 2 things that i have in my car
JumpmanYarisThread starterSO. INDIANA · Jul 31, 2009#18
If is that one its intact🙁

1 attachment not included in this copy

CTScottUSA, CT · Jul 31, 2009#19
There's no fuse in the other place that it would be for a certain config of sedan, so that must be it. Did you pull it and check it closely (ideally with an ohm meter)?
JumpmanYarisThread starterSO. INDIANA · Jul 31, 2009#20
No, But when a fuse goes out it brakes and that fuse its still new
CTScottUSA, CT · Jul 31, 2009#21
Check the HAZ fuse as well - It is in the under hood fuse box on the driver's side.
JumpmanYarisThread starterSO. INDIANA · Jul 31, 2009#22
Ohh Never tot of dat
CTScottUSA, CT · Jul 31, 2009#23
If you have brake lights, but not turn signal lights, the HAZ fuse would be the culprit.
JumpmanYarisThread starterSO. INDIANA · Jul 31, 2009#24
👍Ahhh HAaaaa Found the f-er woohoooo i took another fuse same fuse put it in that same spot and voooillaaaa all working now what i need is to see where can i buy it👍
CTScottUSA, CT · Jul 31, 2009#25
I don't know about down your way, but up here I found an assortment pack of the fuses at Advance Auto Parts (for $7)
JumpmanYarisThread starterSO. INDIANA · Jul 31, 2009#26
cool i will check there sincce i got something to return there anyways thanks a million dude
JumpmanYarisThread starterSO. INDIANA · Jul 31, 2009#27
You know what I forgot the under the hood it actually has some spare fuses so i didnt have to buy any, Now in a difrent topic I started the car and the accelerator wasnt working at all it was wierd I shut it off and started it back up and still nothing I did it again and this time it work BUT now the Check E. Light its up 😠 I SWEAR ITS ALWAYS SOMETHING.
ShroomsterOrlando · Jul 31, 2009#28
did you reinstall all the fuses you pulled and make sure they are seated correctly?
JumpmanYarisThread starterSO. INDIANA · Jul 31, 2009#29
I sure did the light is off now but that was wierd how it didnt let me accelerate the car so its all good to GO now and this Thread can be deleted