Yarisworld Archive

Another intake set up

17 posts · 3,742 views

BrazdonWOriginal postColumbia, MD · Jul 24, 2009#1
Modified weapon-R intake (cut down by 2 inches or so)
ceramic/paint coated pipe with a k&n filter
flex tube run from the fog light housing to the filter
corolla TB with swapped chip (thanks to whooopppeee)

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

Replies 16

lilredrocketDFW, Texas · Jul 24, 2009#2
Nice set up. I need one of those TB's
BrazdonWThread starterColumbia, MD · Jul 24, 2009#3
hit the junk yard! :)
ROCKLAND TOYOTAROCKLAND COUNTY NY · Jul 24, 2009#4
i wondered what that white thing was at the show....
BrazdonWThread starterColumbia, MD · Jul 24, 2009#5
hahahaha
KioshiFremont, CA · Jul 25, 2009#6
how is that hose held on by, zipties? Sufficient air getting to the filter?
Its a nice setup, just curious....i cut slits on my fog light cover like yours and covered w/ mesh behind it..
BrazdonWThread starterColumbia, MD · Jul 26, 2009#7
it actually is held in place by its own size barely fitting threw the passage available lol
aucoriumSouth Africa · Jul 27, 2009#8
Originally Posted by BrazdonW ↑
Modified weapon-R intake (cut down by 2 inches or so)
ceramic/paint coated pipe with a k&n filter
flex tube run from the fog light housing to the filter
corolla TB with swapped chip (thanks to whooopppeee)

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
nice setup bro !!!!!
BrazdonWThread starterColumbia, MD · Jul 27, 2009#9
thanks a lot :)
aucoriumSouth Africa · Jul 27, 2009#10
any perfomace gains from it that are noticeable ?
BrazdonWThread starterColumbia, MD · Jul 27, 2009#11
With the tb yes and the direct air def keeps the intake temp within 4-8 degrees of actual outside temp
What I'm trying to say is my car is basicly a rocket ship now
aucoriumSouth Africa · Jul 27, 2009#12
nice !! im getting the WR secret weapon intake soon , i wanna try the same thing.
BrazdonWThread starterColumbia, MD · Jul 27, 2009#13
do it!
its a very cheap mod :)
tk-421Dagobah · Jul 27, 2009#14
Looking good BW 👍

Did you get any weird stuff from the TB swap? I have some oscillation but I'm OK with it. Also revs are a bit high on cold starts...
BrazdonWThread starterColumbia, MD · Jul 27, 2009#15
we switched the chip sets when we did it. at first there was an oscillation but then it went away. high revs for like the first 5 or 10 seconds then doesn't happen again.
blacksandiegovitzJust chillin' out brah ! · Jul 28, 2009#16
Originally Posted by BrazdonW ↑
we switched the chip sets when we did it. at first there was an oscillation but then it went away. high revs for like the first 5 or 10 seconds then doesn't happen again.
Sounds like you set the tb up right , thats how mine is running now . I'm feeling the white engine cover and intake, they looks good 👍
BrazdonWThread starterColumbia, MD · Jul 28, 2009#17
thanks :)
now all i need to do is hide all those wires hahaha