Yarisworld Archive

exhaust tips what do you think?

33 posts · 17,752 views

06silveryarisOriginal postPuerto Rico · Jul 23, 2009#1
Hi, I saw pics on the custom exhaust sticky one yaris had middle dual exhaust tips also a dark gray yaris who I forget the name but it looks very cool IMO. Here are the pics for the tips I bought I have not yet installed them since I have to make a new pipe coming from the exit of the oem muffler. The pics where just taken they are a bit dark but youll get the picture. Looking foward for feedback. thanks

4 attachments not included in this copy

Replies 32

QmobileHoytville, ohio · Jul 23, 2009#2
nice one dude!!
kacWest/Central Illinois · Jul 24, 2009#3
looks kool to me!
Kaotic LazagnaCentral Valley, CA · Jul 24, 2009#4
Were you referring to me? 😁

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
Kaotic LazagnaCentral Valley, CA · Jul 24, 2009#5
Just make sure you won't need to jack up the car from the rear jack point as I had to have it cut off (at least for the sedan, it's smack dab in the middle).
cleongSingapore · Jul 24, 2009#6
Doesn't it melt your bumper a bit, the hot exhaust tip?
06silveryarisThread starterPuerto Rico · Jul 24, 2009#7
Originally Posted by Kaotic Lazagna ↑
Were you referring to me? 😁

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
Yeah i meant you but I was so tired couldn't look you up sorry man, but yeah I will be making the piping tomorrow since I will use the oem muffler. Do your tips burn the bumper because that I have somo concern with.

Thanks everyone for your feedback
Kaotic LazagnaCentral Valley, CA · Jul 24, 2009#9
No, it does not melt/warp/affect my rear lip. I've had this on for the longest time. I was worried about it at first, but I waited to see if anything will happen before I took further action. So far, so good 😁
06silveryarisThread starterPuerto Rico · Jul 24, 2009#10
Originally Posted by Kaotic Lazagna ↑
No, it does not melt/warp/affect my rear lip. I've had this on for the longest time. I was worried about it at first, but I waited to see if anything will happen before I took further action. So far, so good 😁

thats good to know since it will be very close👍
Kaotic LazagnaCentral Valley, CA · Jul 24, 2009#11
Can't be closer than mine. hehehe. I have 1 mm of space between the tips and the lip. hahaha. Just make sure you have the tip sticking out a bit. I think that may be helping me not ruin my rear lip.
06silveryarisThread starterPuerto Rico · Jul 24, 2009#12
yeah I will have them stick out a bit but I will post pics tomorrow one I get it done. I still have to make the pipe and weld it
Kaotic LazagnaCentral Valley, CA · Jul 25, 2009#13
Does the LB have the rear jack mount in the middle too?
06silveryarisThread starterPuerto Rico · Jul 25, 2009#14
I beleive so it have a fixture down there I wil see if I need to cut it
MPC MotorsportsOklahoma · Jul 25, 2009#15
Originally Posted by Sabretooth ↑
So far, this is the best exhaust tip that you could throw on your Yaris...just get them to cut it shorter past the bolt on shit...then weld er up!

http://cgi.ebay.com/ebaymotors/Toyot...Q5fAccessories

Picture not included in this copy
I've seen that one and have thought about getting one for my TRD exhaust. I love dual outlet tips.

Marc
06silveryarisThread starterPuerto Rico · Jul 25, 2009#16
OK installed this morning. btw I did not have to remove the jack lift area but I did have to modify it a bit but it still works.What do you think? Also the exhaust note change a bit it actually got a bit deeper and burblier I will try to post a vid. I tink the sound is just an echo of the exhaust not since the tips are large. I like the sound.

4 attachments not included in this copy

06silveryarisThread starterPuerto Rico · Jul 25, 2009#17
This is from underneath

2 attachments not included in this copy

CTScottUSA, CT · Jul 25, 2009#18
That looks great! I have the tip that MPC posted the pic of above, but I'd really like to move the output to the center. What tip did you weld on?
Kaotic LazagnaCentral Valley, CA · Jul 25, 2009#19
Nice. I guess LB's are lucky in that they do not have to lose their jack point. hehe. That is a very nice tip. How much did you get it for, and is it stainless steel?
06silveryarisThread starterPuerto Rico · Jul 25, 2009#20
Originally Posted by CTScott ↑
That looks great! I have the tip that MPC posted the pic of above, but I'd really like to move the output to the center. What tip did you weld on?
its a 3A racing tip I picked it up at a local auto parts store for $25
06silveryarisThread starterPuerto Rico · Jul 25, 2009#21
Originally Posted by Kaotic Lazagna ↑
Nice. I guess LB's are lucky in that they do not have to lose their jack point. hehe. That is a very nice tip. How much did you get it for, and is it stainless steel?
Not sure if its stainless, as far as the jack point I did melt of some of it to be able to center the tip. It was cheap $25 at a local auto parts store, it was one of those items that never sold super dusty. I am sure you can find one or similar style at a Pepboys or something like that.
Kaotic LazagnaCentral Valley, CA · Jul 25, 2009#22
hmmm, if it's SS, then I'll go for it in the future. My tip is just chrome plated, so it's rusting inside 🙁
06silveryarisThread starterPuerto Rico · Jul 25, 2009#23
Thanks on the comments 🙂
CTScottUSA, CT · Jul 25, 2009#24
Looks like it might be the 3A Racing 62-2507. If so, it is stainless steel.

Did you weld the tip on, or just use its clamp-on mount?
06silveryarisThread starterPuerto Rico · Jul 25, 2009#25
Yes it is welded I will try to find the wrapper for the part #
Kaotic LazagnaCentral Valley, CA · Jul 25, 2009#26
Thanks.
06silveryarisThread starterPuerto Rico · Jul 25, 2009#27
Originally Posted by CTScott ↑
Looks like it might be the 3A Racing 62-2507. If so, it is stainless steel.

Did you weld the tip on, or just use its clamp-on mount?

you are correct it is 622507👏
Kaotic LazagnaCentral Valley, CA · Jul 26, 2009#28
Cool. Thanks.
1NZYaris1New Zealand · Jul 26, 2009#29
Did mine about 12 months ago 😁

1 attachment not included in this copy

06silveryarisThread starterPuerto Rico · Jul 26, 2009#30
Originally Posted by 1NZYaris1 ↑
Did mine about 12 months ago 😁
Yeah I saw your pics also on the custom exhaust thread. Niice
botchilahPhilippines · Jul 30, 2009#31
Damn I know what I'm doing but with a nice oval single tip this weekend :)
06silveryarisThread starterPuerto Rico · Jul 31, 2009#32
Cool is going to be in the center othe oe
m position?postt pics
advocatelocation · Aug 1, 2009#33
looks great congratulations