Yarisworld Archive

17's and 205/45's. Is it Possible?

16 posts · 5,852 views

bibi-Original postindonesia · Jul 20, 2009#1
is it possilble to put on 17" wheels with 205/45 with OEM springs?
is it going to rubbing?

Replies 15

kimonaHuntington Bch, CA · Jul 21, 2009#2
205/45/17 is the Toyota OEM tyre size and recommended for 17" application with stock suspension.
Penguin GarageFL · Jul 21, 2009#3
On stock suspension with 7" wheels as long as your offset is higher than +25 you shouldn't have any rubbing issues up front.

without more wheel info we can't really give you a certain answer on fitment, which wheels (size/offset) you looking to run?
TamagoOff Grid · Jul 21, 2009#4
OP, you need to make sure your wheel offset is +40MM to +43MM. width alone doesn't tell us whether or not it will rub.
TamagoOff Grid · Jul 21, 2009#5
Originally Posted by Penguin Garage ↑
On stock suspension with 7" wheels as long as your offset is higher than +25 you shouldn't have any rubbing issues up front.

without more wheel info we can't really give you a certain answer on fitment, which wheels (size/offset) you looking to run?
lol you beat me to it..
ChinoCharlesOH · Jul 21, 2009#6
Should the offset be above +25 or between +40 and +43? Information kind of conflicts there.
Penguin GarageFL · Jul 21, 2009#7
Originally Posted by ChinoCharles ↑
Should the offset be above +25 or between +40 and +43? Information kind of conflicts there.
well the +40 to +43mm applies to the above +25mm. 🙂

the +25mm wont rub, although it may not be the look that everyone wants as it's rather aggressive.

Tamago's offset recommendations are true for a no hassle bolt on fitment (for stock or future suspensions), although the rear wheels will be sunken in due to the track difference.

we really need more info on the OP's goals to figure out what the best course of action would be. We'd at least be able to show him a few options. 🎉

we've ran as low as a +23mm with a 205 on a stock suspension yaris without rubbing. 😉
ChinoCharlesOH · Jul 21, 2009#8
I must say, too, that I installed your hub spacers last weekend and they're f'n fantastic. Thanks for making those.
andriesSpain · Jul 21, 2009#9
I have stock rims on my 1.8 TS. They are 17" x 6.5J and the offset is 52 mm with tyres 205/45/17.
My TS have a stock lowering of 0.5 inch and it gives no problems and no rubbing.
kimonaHuntington Bch, CA · Jul 21, 2009#10
One thing to mention here with any wheel/tyre application on stock suspension: The lower the offset, the more you bring the wheels out, the more you visually accentuate the already monstrous Yaris wheel gap, and the more the car looks like a puddle jumper.
TamagoOff Grid · Jul 21, 2009#11
Originally Posted by kimona ↑
One thing to mention here with any wheel/tyre application on stock suspension: The lower the offset, the more you bring the wheels out, the more you visually accentuate the already monstrous Yaris wheel gap, and the more the car looks like a puddle jumper.
bringing the wheels out makes wheelgap more apparent? what about undersizing of tires.?
kimonaHuntington Bch, CA · Jul 21, 2009#12
Originally Posted by Tamago ↑
bringing the wheels out makes wheel gap more apparent? what about undersizing of tires.?
Same goes for "undersizing of tires."
Penguin GarageFL · Jul 21, 2009#13
Originally Posted by ChinoCharles ↑
I must say, too, that I installed your hub spacers last weekend and they're f'n fantastic. Thanks for making those.
No problem here to help, glad you're happy with them 🙂

Shoot me a PM I has a question for you.

Originally Posted by andries ↑
I have stock rims on my 1.8 TS. They are 17" x 6.5J and the offset is 52 mm with tyres 205/45/17.
My TS have a stock lowering of 0.5 inch and it gives no problems and no rubbing.
that's good to hear actually, more room inboard than previously thought. 🎉
Penguin GarageFL · Jul 21, 2009#14
Originally Posted by kimona ↑
Same goes for "undersizing of tires."
same also goes for "up" sizing the wheels.

a 17" wheel with the same overall diameter tire will "appear" to have more wheel gap then the stock wheels.

I've actually found a proper low(er) offset actually makes the high ride height look better, although that could be a personal preference. 😎
ChinoCharlesOH · Jul 21, 2009#15
Puddle jumper... LOL I love it.
kimonaHuntington Bch, CA · Jul 21, 2009#16
Originally Posted by Penguin Garage ↑
same also goes for "up" sizing the wheels.

a 17" wheel with the same overall diameter tire will "appear" to have more wheel gap then the stock wheels.
Yeah. That's my experience as well with +1/+2 applications.