bikegermOriginal postNashville, TN. · Jul 14, 2009#1Hey there I just installed a rear disc brake conversion kit from Garm. Now my ebrake needs adjustment. With this kit there is actually a small drum and brake shoes inside the rotor assembly that only works for the parking brake. I need to adjust my star wheels out by using a brake tool that will go into the drum from the back of the mounting plate for the rotor. My question is, If I need to move my shoes out for more tension, do I push the star wheel or do I pull it towards me with the adjusting tool? I know, I could use trial and error and figure it out but it's easier to just get the answer.
Later....
Replies 3
Yaris HiltonBristol, Tennessee, USA · Jul 14, 2009#2Did your kit not come with instructions?
BrianRiverside, CA · Jul 14, 2009#3You might wanna pull your star wheel off and check that it can be adjusted. Mine doesn't rotate.
I just pulled apart the center console and adjusted the tension for the lever. Works perfect now.
I tried adjusting it from the star wheel but it wouldn't move so I pulled the whole brake shoe assembly
apart and disassembled to strut assemble with the star wheel on it and it was 2 pieces, one slides
into the other, making it impossible to adjust. Another option is to use the brake shoe strut from your
original dums. I was gonna do that but I threw them away.
bikegermThread starterNashville, TN. · Jul 14, 2009#4 Originally Posted by
Yaris Hilton ↑ Did your kit not come with instructions?
No... if it did, I wouldn't be asking. I'm not looking for sarcasm I'm looking for help. 🙌
Thanks Brian for the constructive help !!