Yarisworld Archive

Helicopter noise from the engine???

11 posts · 5,331 views

jonr0613Original postME · Jul 13, 2009#1
can somebody help me with this....when i hit the speed of 90 kmh to 120kmh i can hear something like the sound of the helicopter from the engine...but when i hit 130 kmh it will disapper...from 80 kmh below is fine i can't hear any noise....running with windows closed and AC on....😕

Replies 10

Yaris HiltonBristol, Tennessee, USA · Jul 13, 2009#2
If it's confined to a speed band, it's likely something loose that's fluttering sympathetically with a vibrational frequency occurring at that speed. It'll take some checking around to figure out what could be loose.
yaris-meAnaheim, CA · Jul 13, 2009#3
Try running with the AC off. It could be wheel balance.
jonr0613Thread starterME · Jul 15, 2009#4
ok will try running with AC off later...
1NZYaris1New Zealand · Jul 15, 2009#5
check your inner guards and the under panel 👍
YarisSedanCalifornia - Bay Area · Jul 15, 2009#6
The plastic lining has broken loose under the car and is either hitting the tire or the ground and flapping as you get high speeds.
jonr0613Thread starterME · Jul 15, 2009#7
ok thank guys...will check the car later...
slothman86Savannah, GA · Jul 15, 2009#8
remove helicopter from engine bay
problem solved...j/k
Blue_dragon_192Florida · Jul 15, 2009#9
Originally Posted by slothman86 ↑
remove helicopter from engine bay
problem solved...j/k
That's good humor there!!!!😆
highwaypassJakarta · Jul 15, 2009#10
Originally Posted by Blue_dragon_192 ↑
That's good humor there!!!!😆
agree :D

btw,don't forget to check the engine mounting
jonr0613Thread starterME · Jul 16, 2009#11
hahahah that was a good one!!!

well, problem solved brothers....after checking everything in my engine bay for anything loose i found nothing....i went to the local tire shop and had my wheels checked we found uneven parts in the tires (we went off road to dessert several times) so i needed to replace my front tires and it did solved the problem and now my yaris sounds quiet...

thanks a lot guys....