Yarisworld Archive

YEAH YEAH...I Brought new HID for my baby!!!!

27 posts · 18,075 views

iloveyarisRSOriginal postcanada · Dec 8, 2006#1
👍

1 attachment not included in this copy

Replies 26

tca4Delta,BC · Dec 9, 2006#2
good brand :) let see some pics after installation, so far i am using Xetronic, anyone know if thats a resonable brand?
Chris07LBNew Jersey · Dec 9, 2006#3
👍 🤘 👏 👍
spkrman2 · Dec 9, 2006#4
oooo nice
90tsimissouri · Dec 9, 2006#5
those are nice. i put a set in a buddys honda the other day. any yall know anything about the day time running like and hids. i heard that is not good on the bulb and it will burn out often.
acrbillchicago · Dec 9, 2006#6
Originally Posted by 90tsi ↑
those are nice. i put a set in a buddys honda the other day. any yall know anything about the day time running like and hids. i heard that is not good on the bulb and it will burn out often.
I would definitely disable the DRLs if you are going with a PnP HID kit.
Chris07LBNew Jersey · Dec 9, 2006#7
Check the DIY section for my How_To on disableing the DRLs.
jimcatHong Kong · Dec 10, 2006#8
Originally Posted by iloveyarisRS ↑
👍


That BOSCH HID is it from ebay ???
because i saw it before.
its looking good... 👍
hope to see the pic after installed
elsteverino889MIA! · Dec 10, 2006#9
Have you installed them yet?
GabLToronto · Dec 11, 2006#10
I wonder if this is the real BOSCH brand. As I go to the website www.boschhid.com, it is actually a Chinese company located in China, the naming of the company is a bit confusing as well.
jimcatHong Kong · Dec 13, 2006#11
Originally Posted by GabL ↑
I wonder if this is the real BOSCH brand. As I go to the website www.boschhid.com, it is actually a Chinese company located in China, the naming of the company is a bit confusing as well.
Yes, Believe it or not.
That product may be targeted for asia market so that
the web is in chinese.
ViolinNew Jersey · Dec 13, 2006#12
I can't say with authority, but those may be as phony as a three dollar bill.

From what I can gather, a French company makes ballasts for Bosch and they look like this:

Picture not included in this copy

Picture not included in this copy





You can buy OEM parts off of eBay.

This guy: integra9006hid sells Denso ballasts, Phillips bulbs and a casper shield to reduce glare when you mount the rebased bulb in our stock projector housings. I ordered from him and was very pleased with what I got. I plan to install this weekend. I'm making up a custom harness so I don't fry my stock wiring.

You should order D2R bulbs to reduce glare unless you plan to eventually retrofit projectors as I do - for that you need D2S. I just got these babies today but I need to find a spare set of headlight housings before I attempt the retrofit.
ViolinNew Jersey · Dec 13, 2006#13
Oh yeah...

for high beams I'm mounting a pair of PIAA's 004XT Xtreme White driving lights in the fog light position and I'm making my own Angel Eyes to go around them.
iloveyarisRSThread startercanada · Dec 14, 2006#14
Originally Posted by jimcat ↑
That BOSCH HID is it from ebay ???
because i saw it before.
its looking good... 👍
hope to see the pic after installed
yes, I was brought from e-bay....
the price is very good.....
👍
iloveyarisRSThread startercanada · Dec 14, 2006#15
🎉
Originally Posted by Violin ↑
I can't say with authority, but those may be as phony as a three dollar bill.

From what I can gather, a French company makes ballasts for Bosch and they look like this:

Picture not included in this copy

Picture not included in this copy





You can buy OEM parts off of eBay.

This guy: integra9006hid sells Denso ballasts, Phillips bulbs and a casper shield to reduce glare when you mount the rebased bulb in our stock projector housings. I ordered from him and was very pleased with what I got. I plan to install this weekend. I'm making up a custom harness so I don't fry my stock wiring.

You should order D2R bulbs to reduce glare unless you plan to eventually retrofit projectors as I do - for that you need D2S. I just got these babies today but I need to find a spare set of headlight housings before I attempt the retrofit.
🎉
eTiMaGoBangkok, Thailand · Dec 14, 2006#16
Originally Posted by Violin ↑
Oh yeah...

for high beams I'm mounting a pair of PIAA's 004XT Xtreme White driving lights in the fog light position and I'm making my own Angel Eyes to go around them.
hmmmmmmm that should look quite lovely......
IllusionXBrossard, QC · Dec 14, 2006#17
iloveyarisRS: are you sure you bought the good HID kit?? i thought the yaris uses H4 bulbs ?
ViolinNew Jersey · Dec 15, 2006#18
The Denso kit that I linked to will work in a plug & play situation. The bulb has an extra groove machined into the base that holds it correctly in the included casper shield that fits in the H4 bulb space. It comes with spade plugs to plug into the stock H4 harness. That is OK for short term but you should really buy/make a new wiring harness with relays so the ballasts are powered from the battery or you will fry your wiring (or worse) over time.

Be aware that we have a switching ground setup - meaning that the positive is always on and the ground is switched on and off. It is extremely important to get the polarity correct.
ViolinNew Jersey · Dec 16, 2006#19
Originally Posted by Violin ↑
The Denso kit that I linked to will work in a plug & play situation. The bulb has an extra groove machined into the base that holds it correctly in the included casper shield that fits in the H4 bulb space.

Correction - no it won't.

This is how it's supposed to hold the bulb and adapter:
Picture not included in this copy

Below is how ours looks:

4 attachments not included in this copy

ViolinNew Jersey · Dec 16, 2006#20
Not that big a deal to me as Ken at Sparks Toyota is hooking me up with a pair of stock headlight housings at a reasonable price and I'll be starting my full retrofit any day now. Photos to follow.

With some modifications to our bulb holder, I'm sure the kit I linked to above could be made to work and it is quality parts that will last a very long time.
ViolinNew Jersey · Dec 16, 2006#21
BTW - there is room under our headlights to mount the ballasts. I used double sided super heavy duty mounting tape and two small screws to attach mine like so: (Be very careful drilling into the housing and use the shortest screws that will reach as there is limited space between the black ABS outer housing and the reflective inner housing - but there is space. I used 1 1/4" screws.)

1 attachment not included in this copy

Chris07LBNew Jersey · Dec 16, 2006#22
Looking good.
elsteverino889MIA! · Dec 17, 2006#23
can you take pics of the final product and the light also?
ViolinNew Jersey · Dec 18, 2006#24
Oh I will - don't worry.
tonywenzelAustin, TX · Dec 23, 2006#26
Yea those are not "real" Bosch. It is clearly a chinese company infringing on copyrighted logos and trademarks for marketing purposes. Beware.
Chris07LBNew Jersey · Dec 23, 2006#27
Originally Posted by tonywenzel ↑
Yea those are not "real" Bosch. It is clearly a chinese company infringing on copyrighted logos and trademarks for marketing purposes. Beware.
Welcome to the wonderful world of eBay.

Where's our vendor that was pushing his low budget HIDs on here months back? One member bought, posted problems, and I've yet to see the vendor post ever again.

You get what you pay for people.