hystriaOriginal postMontreal-Canada · Dec 4, 2006#1here's a pic - how do I remove this nut. can't put both a box+allen key and the 17mm wrench simply doesn't fit
how to do this 🤷
Replies 26
YamilRSan Diego, CA · Dec 4, 2006#2It will fit trust me, just have some patience👍
Chris07LBNew Jersey · Dec 4, 2006#3Read my reply to your last post in the Tanabe Spring Install post..
TeruyumeToronto · Dec 4, 2006#4use a offset ranch or use a impact ranch
hystriaThread starterMontreal-Canada · Dec 4, 2006#5 Originally Posted by
Teruyume ↑ use a offset ranch or use a impact ranch
that looks like the rigth idea... appearantly the normal box wrench doesn't grip enough on the nut... a little pull and already slipping off 😕
skcSurrey, B.C. · Dec 4, 2006#6i got mine out with 17mm offset wrench..and allen key
don't strip the nut.. it will be pain in the ass..
mikeukrainetzCanada · Dec 4, 2006#7an offset wrench works.
Ive also had success in the past with a socket (similar to a sparkplug socket) that has the hex at the top and use a wrench on the socket and the allen through the top of the socket.
YamilRSan Diego, CA · Dec 4, 2006#8 Originally Posted by
Teruyume ↑ use a offset ranch or use a impact ranch
Have you ever seen the space for the strut tower? Its a pain to get a wrench in there let alone an impact "ranch" 🆘
Chris07LBNew Jersey · Dec 4, 2006#9 Originally Posted by
YamilR ↑ Have you ever seen the space for the strut tower? Its a pain to get a wrench in there let alone an impact "ranch" 🆘
Exactly... this is how its done, maybe get a better wrench. 😕
hystriaThread starterMontreal-Canada · Dec 4, 2006#10thanks, finally I put a normal socket and gripped it veeery solid with the wisegrip then turn it - that worked 🙂
eTiMaGoBangkok, Thailand · Dec 4, 2006#11 Originally Posted by
Teruyume ↑ use a offset ranch or use a impact ranch
with or without ranch dressing ?😆
SmellyTofuSydney · Dec 5, 2006#12Rattle gun... after I took off all the wiper motors and trim. Come straight off.
Chris07LBNew Jersey · Dec 5, 2006#13...he got it already. 👍
Bunch of funny names for the same tools though. 😁
TeruyumeToronto · Dec 7, 2006#14 Originally Posted by
YamilR ↑ Have you ever seen the space for the strut tower? Its a pain to get a wrench in there let alone an impact "ranch" 🆘
well take a extra 15min remove the black piece and the wiper motor, that's how i put my impact ranch in.
Chris07LBNew Jersey · Dec 7, 2006#15WRENCH. it's impact wrench.
Unless you're a cowboy, leave the ranch for horse's and salad. 😁
YamilRSan Diego, CA · Dec 7, 2006#16 Originally Posted by
Chris07LB ↑ WRENCH. it's impact wrench.
Unless you're a cowboy, leave the ranch for horse's and salad. 😁
😆 🤣 🤣 🤣 🤘
Black YarisToledo, OH · Dec 7, 2006#17what is it with the Canadian and all there funny names for things?
hystriaThread starterMontreal-Canada · Dec 8, 2006#18Let's keep up with the topic guys 😁
I'm trying to remove the lower bolt on the rear shock. No way, the deep socket starts slipping, looks like it's very tighten. Any hint ? Shall I try on the bolt head side 🤷
Attached picture not available
hystriaThread starterMontreal-Canada · Dec 8, 2006#19OMG! I see now
PLEASE go edit the original topic and specify to put the box on the BOLT'S head, not on the nut. This will save for much effort and frustrations. Not every one knows that on rear shock the lower bolts shall be losen by the bolt's head - it's not the first car i'm doing this but I just forgot it. Trying to turn the Nut it's pain in the @ss since it's either a lock nut either a soldered nut.
mikeukrainetzCanada · Dec 8, 2006#20Sometimes if the nuts / bolts are overlly tight you can link two wrenches together (box end of one wrench linked into the open end of the other) - provided you dont have a breaker bar. This works fairly well most times and ive never had trouble rounding off the heads of either the nut/bolt. The shocks on my truck when I bought it were probably still original circa 1970 and this method worked like a charm cause I didnt have room for a breaker bar.
Just watch your knuckles.
YamilRSan Diego, CA · Dec 8, 2006#21 Originally Posted by
hystria ↑ Let's keep up with the topic guys 😁
I'm trying to remove the lower bolt on the rear shock. No way, the deep socket starts slipping, looks like it's very tighten. Any hint ? Shall I try on the bolt head side 🤷
Attached picture not available
Open box wrench and some COJONES with it
Chris07LBNew Jersey · Dec 8, 2006#22........find a mechanic that can do the install.
No offence, but if you are having trouble just removing the rear nut/bolt, id hate to see when you when you move to the front. 😳
hystriaThread starterMontreal-Canada · Dec 8, 2006#23 Originally Posted by
Chris07LB ↑ ........find a mechanic that can do the install.
No offence, but if you are having trouble just removing the rear nut/bolt, id hate to see when you when you move to the front. 😳
usually we put the box on the nut. those nuts on the rear shock are self locking, try to losen that 😁 not every one knows about it. that was the idea 😉 putting the box on this bolt's head works like a breeze.
btw, there's no need to remove the rear wheels when changing the springs 🙂
Chris07LBNew Jersey · Dec 8, 2006#24There is no such thing as a self locking nut.
Its a nut and a bolt, stop trying to reinvent the wheel here..
"btw", if you rather jack the car up higher then you need to, then keep the wheels on. Im sure there are steps that can be done faster/different, then my How_To post stated.. it was ment to be a very straight foward, info packed post to follow, even for the weekend shade tree machinic. 🙄
My How_To was to help guys that had no clue going in to this install, feel confident that they could do it with a little time and the correct tools. Its nice not having to pay people for things you can learn to do yourself. 🙂
YamilRSan Diego, CA · Dec 8, 2006#25Here's a way to create more leverage for those hard to get nuts. This will work with ratchets and wrenches. Find the correct size socket or wrench in this case a 9/16 deep socket; 1/2 drive and 9/16 box wrench for the nut and bolt, get the set up ready, find a wrench big enough that the handle of the ratchet fit through the close side of the wrench, you'll position the wrench with the angle side up, just like in the picture, and give the nut a try, that should brake the torque fairly easy. give it a try and let us know 👍
Chris07LBNew Jersey · Dec 8, 2006#26Good tip..
But air tools and electric impact guns make cake of these nuts/bolts. 😁
hystriaThread starterMontreal-Canada · Dec 8, 2006#27 Originally Posted by
Chris07LB ↑ There is no such thing as a self locking nut.
Its a nut and a bolt, stop trying to reinvent the wheel here..
"btw", if you rather jack the car up higher then you need to, then keep the wheels on. Im sure there are steps that can be done faster/different, then my How_To post stated.. it was ment to be a very straight foward, info packed post to follow, even for the weekend shade tree machinic. 🙄
My How_To was to help guys that had no clue going in to this install, feel confident that they could do it with a little time and the correct tools. Its nice not having to pay people for things you can learn to do yourself. 🙂
Chris, if you pull out the nut you can see that it has 4 little "lines" on the side facing the shock. This prevents the nut from self loosing but also make it hard to loosen with basic tools. On my 90 civic the same nut was welded - I almost broke my back trying to losen it 😆
Your DIY is what people need before starting the same job, so we found out what the tricks and hard steps are to come 👍