Yarisworld Archive

Billet Battery Hold Down... [pics]

122 posts · 28,388 views · page 1 of 3

Chris07LBOriginal postNew Jersey · Dec 3, 2006#1
Gauging interest for anyone looking for a CAD Designed, CNC Machined billet battery hold down, for their stock battery.

Will be avaliable in plain finish, or Anodized in the following colors: clear, blue, burgundy, black, and a yellowy gold. Maybe a few others once he gets rolling and there is enough interest.

This would be a complete replacement for your stamped thin little black bracket that goes across the center of the battery. Working on a solution for the clip-on hood prop holder...

These were the CAD design pics, to widdle out my tester piece. 😁

Once installed and checked for correct fittment, I will contact YarisBuller to see about setting up a Group Buy. 👏

*IF AT ALL INTERESTED, PLEASE POST. TRYING TO GAUGE INTEREST FOR A GROUP BUY.*

**UPDATE 01/21/2007**
Those still interested, please post up if you would like one. PRE-Group Buy pricing will be under $60usd shipped, Canada included! I will see exactly how low we can go with a GB, once YarisBuller sends me the Vendor setup info.

***UPDATE 05/10/2007***
Final Prototype pictures on last page! 😈

10 attachments not included in this copy

Replies 121

eTiMaGoBangkok, Thailand · Dec 3, 2006#2
hey that would be pretty sweet, that stock holddown brace is kinda weedy looking...

approximately how much do you expect this to cost, roughly?
YamilRSan Diego, CA · Dec 3, 2006#3
Put me down for one when available
Chris07LBThread starterNew Jersey · Dec 3, 2006#4
Originally Posted by eTiMaGo ↑

approximately how much do you expect this to cost, roughly?
Price not set in stone yet, but in a Group Buy situation, expect for around $55 Shipped for the Anodized bracket,
and cheaper for the plain un-coated, non engraved logo bracket.

Canadian's will get theirs quicker, as thats where they are being made/shipped from.
ecoAtlanta · Dec 3, 2006#5
Ill take one in a GB.
Black YarisToledo, OH · Dec 3, 2006#6
Originally Posted by Chris07LB ↑
This would be a complete replacement for your stamped thin little black bracket that goes across the center of the battery. Working on a solution for the clip-on hood prop holder...
To tell you the truth I have yet to use my hood prop, my hood stays up on it's own it is so small, anyone else do this? With the new Batt hold down we could just get rid of the hood prop
Chris07LBThread starterNew Jersey · Dec 3, 2006#7
I wouldn't recomend removing the hood prop from the car. Just because there may not be a hold down bracket for it to rest when the hood is down, doesn't mean you still can't use it to prop the hood up/open.

I never leave the hood open unsupported by the hood prop.
johnnyfiveMilwaukee WI · Dec 3, 2006#8
got a solution for the hood prop....gas shocks :)

definetly interested in one of these.
vodkalushRochester, NY · Dec 3, 2006#9
I was just thinking the samething, should be a pretty cheap and "easy" install... havent checked price's but when I stop at autozone again I'll take a look at the gas shocks sizes and prices.
Chris07LBThread starterNew Jersey · Dec 3, 2006#10
Thought of that a while ago.. I have some very short shocks off another project, and they wouldnt even work.

Keep in mind, there is plenty of room to mount the upper bracket to the hood, but there is not enough room to place/mount the lower to the inside of the fender(where hood closes).

If anyone figures it out, Id love to copy it.

NOW, back on topic.
spkrman2 · Dec 3, 2006#11
interested for sure, $ not there for it...but interested no doubt!
ism3tSouthern California · Dec 4, 2006#12
+ 1 for me
Chris07LBThread starterNew Jersey · Dec 4, 2006#13
FYI a few little design changes have been made in CAD, which is also bringing the price down a little....

😈
Chris07LBThread starterNew Jersey · Dec 5, 2006#14
TTT
vodkalushRochester, NY · Dec 5, 2006#15
soooo... any pics of the changes?
nick1983Winnipeg Manitoba · Dec 5, 2006#16
interested.
Chris07LBThread starterNew Jersey · Dec 29, 2006#17
Few changes still being tweeked.. will have an angled notch cut in for the hood prop.

Here, the top of the test fitting piece is finished.. Bottom is being cut now.

1 attachment not included in this copy

spkrman2 · Dec 29, 2006#18
wow that thing is HOT

seeing it in person makes it more tempting :)
Chris07LBThread starterNew Jersey · Dec 29, 2006#19
Its also just the test piece to fine tune the fit. Final production pieces will look even better.
RogueYarisJAX · Dec 29, 2006#20
I'm interested.
ChinoCharlesOH · Dec 30, 2006#21
Pfff... that's hot dawg. Any chance we'll see a blue anodized version? 😁
Chris07LBThread starterNew Jersey · Dec 30, 2006#22
Originally Posted by ChinoCharles ↑
Pfff... that's hot dawg. Any chance we'll see a blue anodized version? 😁

"or Anodized in the following colors: clear, blue, burgundy, black, and a yellowy gold." 😉
ChinoCharlesOH · Dec 30, 2006#23
DOH!
Chris07LBThread starterNew Jersey · Dec 30, 2006#24
Ill put you down for 10 of them. 👍
ChinoCharlesOH · Dec 30, 2006#25
LOL, what a bastard. 😉
ecoAtlanta · Dec 30, 2006#26
Hurry up,man Im impatient,want to see this thing in my car.
Chris07LBThread starterNew Jersey · Jan 1, 2007#27
Tester due in a few days... 😁
the.shauSchaumburg, Il · Jan 1, 2007#28
I'd like one, put me down for one!!!
spkrman2 · Jan 6, 2007#29
beena few days, wheres my bat hold down :)
kdctuningCape Cod, Ma. · Jan 6, 2007#30
depending on the color of the car I get, I might be intrested
Chris07LBThread starterNew Jersey · Jan 6, 2007#31
Canada I guess is not the fastest place to ship it from. 🙁
mikeukrainetzCanada · Jan 6, 2007#32
Yup, I think Canada Post still uses actual 'horse' power for mail....or so it seems. Although Im still waiting on a center cap I ordered in November from Florida.
paultyler_82USA · Jan 6, 2007#33
Is it going to have that "machined" look or is it going to be mirror or satin solid finish on the final production version?
ChinoCharlesOH · Jan 7, 2007#34
Originally Posted by paultyler_82 ↑
Is it going to have that "machined" look or is it going to be mirror or satin solid finish on the final production version?
Read the first post in the thread... it comes in a choice of colors.
paultyler_82USA · Jan 7, 2007#35
Originally Posted by ChinoCharles ↑
Read the first post in the thread... it comes in a choice of colors.
not what I was referring to, in the pictures it has a pattern of lines, like a machined finish, I was wondering if the end result was going to be smooth, or if it would have that machined finish.
vodkalushRochester, NY · Jan 7, 2007#36
seeing how the one that he took the pic of is just a production model I would hope that thats the only reason why those "machine swurles" are on it; and the final product will over a smooth finish.
lost.mindDover, DE 19904 · Jan 9, 2007#37
I will take one. When will they be ready? I need to know so that i can have the money.
Chris07LBThread starterNew Jersey · Jan 9, 2007#38
Soon.. get your funds together.
Chris07LBThread starterNew Jersey · Jan 10, 2007#39
Here's the finished tester. Keep in mind this is the tester, hence the few little cosmetic flaws in the billet.
Attached is a finished Toyota FJ hold down, to see how nice the finished pieces are. 😁

3 attachments not included in this copy

ChinoCharlesOH · Jan 10, 2007#40
👏 👏 👏

You making them for all Toyotas Chris?
spkrman2 · Jan 10, 2007#41
imight have to pickup a red one, we'll see 😎
YamilRSan Diego, CA · Jan 10, 2007#42
Thats HOT
the.shauSchaumburg, Il · Jan 10, 2007#43
Looks sweet..
Great job Chris!!!
johnnyfiveMilwaukee WI · Jan 10, 2007#44
so when can we buy? ;)


ohh, and they look good too, curious to see how well that will work for the hood prop holder
eTiMaGoBangkok, Thailand · Jan 11, 2007#45
reserving a good chunk of my paypal balance for this already 😉
Chris07LBThread starterNew Jersey · Jan 17, 2007#46
Tester Installed.

This will be going back to Canada to get the little tweeks I needed to do, re-programed in the CNC for the final production pieces.

We may or may not be able to keep the hood prop holder in the final design. If its doable, you will have a choice, with or without the notch cut in for the hood prop.

5 attachments not included in this copy

Doc ZaiusOttawa, ON, Canada · Jan 17, 2007#47
OOooooooooohhh man! Thats nice! 🤤

Please tell me you could make one with the "RS" logo engraved instead of "Yaris". That would be AMAZING!! 😁
Chris07LBThread starterNew Jersey · Jan 17, 2007#48
Originally Posted by influx ↑
OOooooooooohhh man! Thats nice! 🤤

Please tell me you could make one with the "RS" logo engraved instead of "Yaris". That would be AMAZING!! 😁
Shouldnt be a problem. He has been doing all kinds of custom engraving for the Toyota FJ billet hold downs. 👍
Chris07LBThread starterNew Jersey · Jan 17, 2007#49
Originally Posted by bigsky2 ↑
Looks good Chris.

However, can we have a pic of the hood prop in the down position?
I know it's temporary for you as you are sending it back, but I am curious to see where the hood prop would sit when you put it down against the holddown or elsewhere.
Will do.. tomorrow though. 🙂
Doc ZaiusOttawa, ON, Canada · Jan 17, 2007#50
Originally Posted by Chris07LB ↑
Shouldnt be a problem. He has been doing all kinds of custom engraving for the Toyota FJ billet hold downs. 👍
Wicked! I'm thinking the "RS" would fit perfectly along there...!

Picture not included in this copy
(please excuse the piss-poor gfx editing!) 😳