acrbillOriginal postchicago · Nov 30, 2006#1Here is a how to for a ghetto camcorder mount that I made for my PT. Should work on any car with regular type adjustable headrests.
I got 3' of 1x1x1/8" aluminum angle
2 u-bolts and assorted hardware
It attaches to the headrest uprights using the U-bolts. I attached it across both seats to help with camera shake. This is the first copy of the mount that will eventually become much nicer and easier to take in and out of the car.
Eventually I will add a rotating base and quick release connectors.
Picture lost · home.comcast.net Picture lost · home.comcast.net Picture lost · home.comcast.net Here is a short clip of the test drive.
http://home.comcast.net/~job0b/icv.wmvReplies 31
eTiMaGoBangkok, Thailand · Nov 30, 2006#2smart!
W.A.S.PWestchester County, NY · Dec 1, 2006#3DAT BE DA SHIT FO SHO!!!!
😆
Good idea!!! 👍
ism3tSouthern California · Dec 1, 2006#4...just wondering why?
dngzvancouver · Dec 1, 2006#5itd be great for auto-xing! but is that a kid's seat in the back?? hahaha auto-x with ur kid in the back!
H8SGASSan Diego, CA · Dec 1, 2006#6Nice mount definitely on the higher side of some I've seen, I would not call it ghetto at all. I have no clue what Geno uses his for as there are many uses. When I had one it was for providing video clips of "who won" but I was a speed addict and still sometimes suffer withdraws 😁
W.A.S.PWestchester County, NY · Dec 1, 2006#7 Originally Posted by ism3t
...just wondering why?
Backseat porn? 🤷
Ahhh, the possibilities!
😉
acrbillThread starterchicago · Dec 1, 2006#8 Originally Posted by ism3t
...just wondering why?
I used it as a sort of ghetto data logger. I would point it at my boost gauge and tach so see where I was spiking to and and what RPM. I also used to use it while doing some spirited driving on my favorite stretch of road.
acrbillThread starterchicago · Dec 1, 2006#9I was actually planning on getting back into auto-x with the Yaris. I gave up on it and sold my Neon a few years back.
If I do get back into it I plan on mounting lipstick cameras in the fog light area.
firefly1_0Edmonton Alberta Canada · Dec 1, 2006#10i have seen that at autoX manytimes, and the footage is fair to good.
Notthy[Yaris/S]07Puerto Rico · Dec 8, 2006#11 Originally Posted by
W.A.S.P ↑ Backseat porn? 🤷
Ahhh, the possibilities!
😉
jajajajajjajaja sounds good jajajaja its a great idea !!! LOLL
dngzvancouver · Dec 8, 2006#12 Originally Posted by
Notthy[Yaris/S]07 ↑ jajajajajjajaja sounds good jajajaja its a great idea !!! LOLL
post vids 👍
acrbillThread starterchicago · Dec 9, 2006#13 Originally Posted by echo_hrs ↑
In a frontal collision It might just leave you headless...
I suppose the camera could go through the windshield but I don't see it chopping my head off.
Plus I don't make it a habit of driving around the street with it.
SmellyTofuSydney · Dec 9, 2006#14My version that fits all cars with headrest post.
acrbillThread starterchicago · Dec 9, 2006#15<---- Jealous
Notthy[Yaris/S]07Puerto Rico · Dec 13, 2006#16 Originally Posted by
dngz ↑ post vids 👍
coming soon ahaha
KSIbuckyFond du Lac, WI · Dec 13, 2006#17thats really cool
m911gtChicago · Jan 9, 2009#18I started (finally) making a mount for my front headrests yesterday, if I can get access to my school's machine shop, I should have it finished by tomorrow.
m911gtChicago · Jan 11, 2009#19This is one of my more useful custom modifications, imo. I will be recording auto-x and drag sessions as well as a rally or two this summer. The mod would have been really simple but I did not have access to a machine shop so I had to use my kitchen as usual. Future plans include making a quick-release for the camera and the ability to independently adjust the seats while the mount is installed.
Here's where I got my inspiration from:
http://www.cruisecam.com/mounts.html The large mount they sell is $90 plus shipping. I have a total of $27 in mine and that's because the unistrut was kind of pricey.
DIY Started off with a 3' section of unistrut, I wanted the mount to span between the two headrests for added stability. The reason I chose unistrut instead of a solid piece of aluminum is due to the rigidness of the strut and the added holes to have multiple placements for my camera.
Next, I placed the strut on top of the seats (after removing the headsets) and measured exactly where the holes needed to go. Of course when one side lined up perfectly, the other did not.
Then I bored out the headrest post holes in the unistrut to 5/8" on the passenger side and drilled 1 1/4" x 5/8" slots on the driver's side.
Then I made sure the strut fit nicely in place.
After confirming a nice fit, I lightly hand-sanded the outer surfaces of the bar then primed, painted, and clear-coated it.
Finally I put the bar in place and used 1 1/4" x 2" coarse bolt, 3 thick spacer washers, and a rubber washer (for the base of the camera) to mount the camera in the center of the bar.
Since I only have one camera, I had to use it to take pics of the mount. I did take two videos yesterday and they look very stable! I'll have to take a short one today and upload it to the net.
jclo3313Woodstock, Ga · Jan 11, 2009#20Not what I had invisioned, bu really coo idea. A+
m911gtChicago · Jan 11, 2009#21 Originally Posted by
jclo3313 ↑ Not what I had invisioned, bu really coo idea. A+
thanks John, i appreciate it. i can't take any credit for originality but it worked out.
auxmikeLI, New Yawk · Jan 11, 2009#22I drove a PT rental once and LOVED it. It's got plenty of spunk, I''ll say!😳
RainSoCal · Jan 11, 2009#23For better results, do it in your kitchen. LOL.
You forgot that, dork!
m911gtChicago · Jan 11, 2009#24i did mention i had to use the kitchen :), it's my paint booth/machine shop/occasional cooking area.
TamagoOff Grid · Jan 11, 2009#25 Originally Posted by echo_hrs ↑
In a frontal collision It might just leave you headless...
yeah, if your head was somehow in the middle of the car 🤷🙄
m911gtChicago · Jan 11, 2009#26 Originally Posted by
Tamago ↑ yeah, if your head was somehow in the middle of the car 🤷🙄
or if your head was 2' wide?
thepocheMontreal · Jan 11, 2009#27 Originally Posted by
SmellyTofu ↑ My version that fits all cars with headrest post.
ohhhh, that's a great idea to strap it like that. I have a similar mount and the seat vibrates, that should help a lot.
m911gtChicago · Jan 12, 2009#28auxmikeLI, New Yawk · Jan 12, 2009#29 Originally Posted by
m911gt ↑
Looks good, too bad the weathers awful there.
I'd ditch whatever's strapped on that mirror, it's very distracting.
KCALB SIRAYVirginia · Jan 12, 2009#30looks good, Matt. Where did you get that mirror, out of a school bus? jk =)
m911gtChicago · Jan 12, 2009#31 Originally Posted by
auxmike ↑ Looks good, too bad the weathers awful there.
I'd ditch whatever's strapped on that mirror, it's very distracting.
lol, wish i could...student parking pass 😆
thanks!
m911gtChicago · Jan 12, 2009#32 Originally Posted by
KCALB SIRAY ↑ looks good, Matt. Where did you get that mirror, out of a school bus? jk =)
yep, hijacked a short bus :)