Yarisworld Archive

Good place to find constant & switched 12V behind dash?

17 posts · 17,773 views

atebitOriginal postNC · Nov 25, 2006#1
I'm looking to add some additional accessories to my 07 sedan that require constant/switched 12V. I thought about using vampire taps on those wires that supply my alpine HU, but I don't want to end up drawing too much current through them.

I was thinking about mounting this device on the drivers side, right above the little "pocket" opening on the dash console near the driver's right leg. Is there an easy place to grab constant/switched 12V from in that areas?

Replies 16

Waysidenew york · Nov 25, 2006#2
Try the fuse box. There should be a couple open 'slots' depending on your vehicles options. A voltage tester is your best friend...
drell42Not here · Nov 25, 2006#3
the cig lighter has a switched that I used for my radar!
atebitThread starterNC · Nov 26, 2006#5
Very cool...I'll give one of those a try. I just hope some of those positions that are marked with a "/" on the fusebox cover are active...
vodkalushRochester, NY · Nov 26, 2006#6
Originally Posted by Violin
... Picture not included in this copy...
haha, i cant get enough of that damn pic, not sure if i said or not but - great find violin 👍

as far as switched and constant sides of the fuse - the side (of the fusebox) closest to the engine offers constant power where the other side is switched on and off with the key (atleast my sedan is that way)
expo2Gardiner, NY · Feb 21, 2009#7
I mounted a telephone wall-mount recpt in the consule pocket next to the passenger's legs. It powers off the power recpt/cig socket. I plug my Bel 955 rd into it because the radar detector has a telephone plug-style connector (RJ-11?).
POORSHANE CT · Feb 21, 2009#8
There is acc power constant power illumination and ground available behind the gage cluster. The wires power the clock.
IllusionXBrossard, QC · Feb 23, 2009#9
hola! old thread :)

well, just incase you guys didn't know. The yaris has constant +12v at anything you plug in. Use the ground point of your choice and you have power!
just beware how much power you are pulling from that fuse.

Basically, the cig lighter is always on, cept you need to ground it elsewhere when the ignition is not to "on"
yaris primeMichigan · Mar 1, 2009#10
So, where would be a good place to tap for the A1 aftermarket window and locks kits. I emailed A1 and according to them, you need 10-20amps for the locks, and 15-20 for the windows.
IllusionXBrossard, QC · Mar 1, 2009#11
through the firewall and to the battery :)
yaris primeMichigan · Mar 2, 2009#12
Originally Posted by IllusionX ↑
through the firewall and to the battery :)
Anbody know the best place to go through the firewall for this?
CTScottUSA, CT · Mar 2, 2009#13
Originally Posted by yaris prime ↑
Anbody know the best place to go through the firewall for this?
There is a large bushing through the firewall, just behind the fuse panel. It has plenty of space to poke holes through it without nailing the harness. It's in the middle of this pic:

Picture not included in this copy
yaris primeMichigan · Mar 3, 2009#14
Originally Posted by CTScott ↑
There is a large bushing through the firewall, just behind the fuse panel. It has plenty of space to poke holes through it without nailing the harness. It's in the middle of this pic:

Picture not included in this copy
Awesome, thank you.
goku87AK · Mar 3, 2009#15
Originally Posted by CTScott ↑
There is a large bushing through the firewall, just behind the fuse panel. It has plenty of space to poke holes through it without nailing the harness. It's in the middle of this pic:

Picture not included in this copy
can you attach that image to a post? photobucket is blocked. thanks. 😁
CTScottUSA, CT · Mar 3, 2009#16
Originally Posted by goku87 ↑
can you attach that image to a post? photobucket is blocked. thanks. 😁
Here you go:

By the way, the other side of the bushing is behind the battery. It is easiest to poke through from the dash side, and then find your wire under the hood...

Picture not included in this copy

1 attachment not included in this copy

goku87AK · Mar 3, 2009#17
Originally Posted by CTScott ↑
Here you go:

By the way, the other side of the bushing is behind the battery. It is easiest to poke through from the dash side, and then find your wire under the hood...

Attachment 20001
awesome. thanks. thats high value info right there! 👍