WRLEOOriginal postSan Francisco · Nov 10, 2006#1Looking for a Test car for our 4-2-1 Street Header & Intake system.
Here are some pictures of our newest Header for the Celica.
If anyone in the Bay Area is intrested please PM or Email me.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Replies 79
YamilRSan Diego, CA · Nov 10, 2006#2That looks awesome. Could you give an estimate on the price?
WRLEOThread starterSan Francisco · Nov 10, 2006#3It's going to be as cheap as the OBX or MEGAN ( SAME KIND OF PRODUCTS )
i was talking to my production manager since we make the headers in USA, and he said it should be in the range of $350. But a group buy will help the price get alittle lower. Now only if i can get a car over here to test fit it and confirm 100% perfect fit.
ViolinNew Jersey · Nov 10, 2006#4Again with the West Coast.
Sheesh!
WRLEOThread starterSan Francisco · Nov 10, 2006#5Here are the dyno results from our Xb / Xa Header which is the same platform we just changed some brackets around. So performance should be exactly the same, if the ecu is the same.
Picture not included in this copy Picture not included in this copy Picture not included in this copy DYNO RUN VIDEO:
http://www.monstermotorworks.com/ima...headertest.AVI YamilRSan Diego, CA · Nov 10, 2006#6The Megan is ofered in a GB for 20 people for $190.
WRLEOThread starterSan Francisco · Nov 10, 2006#7Compare Apples with Apples..
Megan is 4-1. WR is 4-2-1 which is proven to make more power.
Chris07LBNew Jersey · Nov 10, 2006#8Nice.
C2AUTOSPLLoma Linda, CA · Nov 10, 2006#9HEy Leo, its me Jay from FitFreak. Nice to see you on here :)
KatanaUnder the hood! · Nov 11, 2006#10Are you planning on releasing a 4-2-1 header for the 1.3lt engine(2SZ-FE)?
ItsMyDailyLos Angeles, CA · Nov 11, 2006#11Wow is that dyno compared to stock? Do I see a 11torque increase over stock, and a 11whp increase over stock????! Those are very nice increase in numbers. And it's classic 4-2-1 design showing very good gains botom end, and a nice increase throughout the entire powerband. The question is was the dyno done with just the header as the only mod?
WRLEOThread starterSan Francisco · Nov 11, 2006#12yes that was the only mod.
we are planning to do a 1.3L header also.
Were looking for a final test fit car to check the fitment 100%.
anyone in the bay area?
dngzvancouver · Nov 11, 2006#13=( id rather have these headers than the MR ones =(.....
ItsMyDailyLos Angeles, CA · Nov 11, 2006#14 Originally Posted by dngz
=( id rather have these headers than the MR ones =(.....
so just leave the group buy and wait for these.
BulletProofAutoGardena, CA · Nov 11, 2006#15i got to see some of their products in person at sema during my stroll around. i was impressed with the quality to price ratio.
Chris07LBNew Jersey · Nov 11, 2006#16 Originally Posted by john@bp
i got to see some of their products in person at sema during my stroll around. i was impressed with the quality to price ratio.
Whats up John... Hey, you going to be back in NV for CES, Ill buy ya a few cold one's.
ViolinNew Jersey · Nov 11, 2006#17I'm glad I waited.
Be sure to post more once it's tested and ready for market.
ecoAtlanta · Nov 12, 2006#18I would have to say that the Megan Racing headers will be better.Because a header that is 4-1 gives you the advantage in the high rpm band,say 3000-6000,rather then 500-4500.Headers that are 4-1 have lease restriction,a must at high rpms.
tca4Delta,BC · Nov 12, 2006#19Helping a friend to ask, does the header fits the old 05 Echo HB? thanks.
jcoveBrampton, Ontario, Canada · Nov 12, 2006#20Want....need....can't spend money....😢
ItsMyDailyLos Angeles, CA · Nov 12, 2006#21 Originally Posted by eco
I would have to say that the Megan Racing headers will be better.Because a header that is 4-1 gives you the advantage in the high rpm band,say 3000-6000,rather then 500-4500.Headers that are 4-1 have lease restriction,a must at high rpms.
eco check out the dyno plot. This header is making great gains down low, but even better ones up top. For an engine this small a 4-1 design is not necessary, and your probably going to see small gains if any down low, but I'm sure you'll see some up top. Fact is that our cars would benefit more from midrange power then they would from top end power. This header looks like its the best of both worlds.
KatanaUnder the hood! · Nov 12, 2006#22 Originally Posted by WRLEO
yes that was the only mod.
we are planning to do a 1.3L header also.
Let me know cause I am extremely interested!!!
ecoAtlanta · Nov 12, 2006#23Yes,the chart looks good till about 4500rpm,then performance degrades.A 4-1 will be better from that point on,I want more oomph when Im already traveling at 75 mph,about 3200rpm,and want to floor it,Ill reach top end faster with a 4-1.Now I will say a 4-2-1 will be slightly,and I mean slightly better for accelaration,only because it will give alittle mor back pressure,somthing you dont want when the engine is wide open.Just wait till we test the Megan headers,youll see.
WRLEOThread starterSan Francisco · Nov 12, 2006#24I have seen these 4-1 and 4-2-1 header convo's on many forums..
it's to each their own. but back to basics..
For example.. ( Im just here to give info.)
95% of Honda Race Headers are 4-2-1.
These guys look for the biggest gap in BASE and after dyno runs.
The most important things is TORQUE, Not Horsepower.
Torque PULLS you and Gives you that OMMPH..
4-2-1 does not give more back pressure. It's all about the pairing of the firing pattern of the exhaust and how the exhaust scavenges out of the cylinder head and how it gets pulled out of the header into the exhaust.
Think of how the engine works.
Cylinder 4&1 are up while 2&3 are down. Thats the engine cycle.
Our header is set up to scavenge the exhaust gases out of the engine as fast as it can hence the 4-2. And finally when the two different pulses of exhaust gases are merged they push each other out. If you can understand this, you will start to understand why 4-2-1 headers are better and more effecient than a 4-1 header.
As you can see 4-1 headers dont take much design and or any R&D at all. Just run all the tubes into one collector. Lets let the dyno sheets speak for themselves.
Here are some examples for you.
http://www.scionlife.com/forums/view...ht=mmw++header http://www.scionlife.com/forums/view...w++header+dyno http://www.scionlife.com/forums/view...ht=mmw++header http://www.scionlife.com/forums/view...ht=mmw++header ChinoCharlesOH · Nov 12, 2006#25If you're going to compare two products, it would be good to at least mention both, rather than mention one 200 times and mention the other once. 🙄
As you can see 4-1 headers dont take much design and or any R&D at all.
You must think we're morons...
I smell bias. Go read up kiddies, the 4-2-1 vs. 4-1 debate is up in the air and differs depending on the car and the rest of the components with it.
WRLEOThread starterSan Francisco · Nov 12, 2006#26 Originally Posted by ChinoCharles
If you're going to compare two products, it would be good to at least mention both, rather than mention one 200 times and mention the other once. 🙄
You must think we're morons...
I smell bias. Go read up kiddies, the 4-2-1 vs. 4-1 debate is up in the air and differs depending on the car and the rest of the components with it.
We do not slam on anyone. im just here to provide info.
Im just pointing out other peoples thoughts on 4-2-1 headers.
Im simply pointing out 4-1 & 4-2-1 designs.
Here are some other companies that make the same kind of headers.
http://www.hytechexhaust.com/ http://www.comptechusa.com/ http://www.rcrewracing.com/forum/viewtopic.php?t=103 Jst a few to mention.
ChinoCharlesOH · Nov 12, 2006#27He isn't a supporting vendor yet, I can question him all I want. 🤣
He'd say anything to sell some headers. Let me guess, people with 4-2-1 headers are generally larger down there, right?
ViolinNew Jersey · Nov 13, 2006#28I had already decided that I wanted a 4-2-1 over a 4-1 for midrange gains and driveability. I'm not building a drag racer - this is my daily commuter. I also think a manufacturer should do testing as part of the design process rather than after the sale - just me I guess.
ItsMyDailyLos Angeles, CA · Nov 13, 2006#29I agree with Violin. I wanted a 4-2-1 design for the yaris aswell. I believe the Yaris will benefit better with a 4-2-1 design then a 4-1. Top end gains are going to be similar with either one, but it's bottom end hat is going to be benefited with the 4-2-1 design. My car is my daily commuter and I want to improve on city driving as much as possible. However even for those thinking of tracking their yaris...your going to want to improve on your midrange with this car a lot more then just top end numbers.
FastnxCanada · Nov 13, 2006#30 As you can see 4-1 headers dont take much design and or any R&D at all. Just run all the tubes into one collector. Lets let the dyno sheets speak for themselves.
What? That has got to be one of the most ignorant statments I have ever heard.
http://www.honda-tech.com/zerothread/1780476 this header was obviously just thrown together 🙄
Looks like it didn't help much either
[cough]18hp gain[/cough]
WRLEOThread starterSan Francisco · Nov 13, 2006#31I was talking about Honda's.. With some kind of VTEC.
That was a SR20 NA..
Like i said ... 4-1 heades are easy to make, alot easier than a 4-2-1.
That was my point. You dont have to agree with me..
Get me a car to run it on and i will prove it to you.. thats all. we dont need to go back and forth about these little things. Just let the dynos speak for themselves.
ecoAtlanta · Nov 13, 2006#32Like I said,a 4-1 design will be better after 4500rpm,and looks like it might be just as good in the low rpm band from that example,but remeber folks,your going to pay $350.00 for the headers from WR,plus shipping and tax,when you can pay $190.00 for the Megan headers,and low low end diffrence is not even noticable between the 2,and the Megan headers will be better at the high end,this should not be a hard choice,save some money and get the better headers,Megan headers.
KatanaUnder the hood! · Nov 13, 2006#33 Originally Posted by WRLEO
From what I generally know, a 4-2-1 design is better from a 4-1 design.My Yaris has 4-1 header and some technicians have told me that this is bad, because the engine's gases are immediately compressed into one tube, than gradually compressing them from 4 tubes, to 2 tubes, to 1 tube(4-2-1).
However, I may be wrong.🆘
the_saintOmaha, somewhere in middle america · Nov 13, 2006#34Might as well put in my $0.02. 😆
From what I remember & I've been told (back in my V8 days) 4-1 or longtube headers are more for WOT/drag racing because the exhaust doesn't have much in the way of restriction...but as a result you lose low RPM power/torque.
With the 4-2-1 style headers you get better drivability because (when properly engineered) the layout of the tube and the order in which they come together helps scavange or suck exhaust out which is supposed to help low end power.
So, in short...
4-1 better for drag racing
4-2-1 better for daily driver
If you're bored you can always read this...
Header-Exhaust Design Effects on Engine Power.
YamilRSan Diego, CA · Nov 13, 2006#35Alright so who's going to volunteer to head a Group Buy on this header? And put me down for one, please👍
ViolinNew Jersey · Nov 13, 2006#36Will someone in the Bay area please step up?
YamilRSan Diego, CA · Nov 13, 2006#37I will be flying out of the country for 18 days during christmas time. I can volunteer my car but It will need to be picked up and dropped off here in Fl and off course a free header will be great. Holla
grimezAmes, Iowa · Nov 13, 2006#38 Originally Posted by Katana
From what I generally know, a 4-2-1 design is better from a 4-1 design.My Yaris has 4-1 header and some technicians have told me that this is bad, because the engine's gases are immediately compressed into one tube, than gradually compressing them from 4 tubes, to 2 tubes, to 1 tube(4-2-1).
This might be true. I'm a chemical engineer, and the effects of combining gases can many times generate unwanted slowing turbulence. In the end, if the distance between the two separate joints is long enough, the gases will become less turbulent before they mix again. This would help in keeping the gas passing through faster.
Just my 2 cents.
LVAquamanLas Vegas · Nov 14, 2006#39WRLEO,
I am in LV. I can be there on Sunday. Let me know if you can not find any other takers.
eTiMaGoBangkok, Thailand · Nov 14, 2006#40actually I recently read a pretty technical article (I think it was in "Turbo" magazine), about the difference between 4-1 and 4-2-1 headers, essentially a 4-1 header will give you more of a large improvement at high revs, while a 4-2-1 is a more linear improvement over the whole rev range. I'll have to read it again to get the finer points (or scan it and post here?)
Chris07LBNew Jersey · Nov 14, 2006#414-1 is fine with me, as 99% of my commute is steady high speed highway miles for just over an hour each way.
KatanaUnder the hood! · Nov 14, 2006#42 Originally Posted by the_saint
Might as well put in my $0.02.
From what I remember & I've been told (back in my V8 days) 4-1 or longtube headers are more for WOT/drag racing because the exhaust doesn't have much in the way of restriction...but as a result you lose low RPM power/torque.
With the 4-2-1 style headers you get better drivability because (when properly engineered) the layout of the tube and the order in which they come together helps scavange or suck exhaust out which is supposed to help low end power.
So, in short...
4-1 better for drag racing
4-2-1 better for daily driver
Originally Posted by grimez
This might be true. I'm a chemical engineer, and the effects of combining gases can many times generate unwanted slowing turbulence. In the end, if the distance between the two separate joints is long enough, the gases will become less turbulent before they mix again. This would help in keeping the gas passing through faster.
Just my 2 cents.
Well, generally this is the basic idea.
But then, why Toyota chose a 4-1 design for mine???I mean, I am supposed to be using the car on city streets, so I need it to be drivable.😲
WRLEOThread starterSan Francisco · Nov 14, 2006#43Im willing to give a deal to 5 guys to try out and give feedback at a discount.
PM for details. We are still on for monday for the dyno test and full on pictures on monday..
GalavoxxSan Francisco · Nov 14, 2006#44 Originally Posted by WRLEO
Im willing to give a deal to 5 guys to try out and give feedback at a discount.
PM for details. We are still on for monday for the dyno test and full on pictures on monday..
I just PM'd. Let's see what happens. I would love to get a header, although I've yet to get a CAI or an exhaust...
ChinoCharlesOH · Nov 14, 2006#45 Originally Posted by Galavoxx
I just PM'd. Let's see what happens. I would love to get a header, although I've yet to get a CAI or an exhaust...
Gotta start somewhere, right? 😆
GalavoxxSan Francisco · Nov 14, 2006#46True. And if those Dyno numbers are accurate, 11 hp is a very nice start.
Chris07LBNew Jersey · Nov 14, 2006#47 Originally Posted by WRLEO
Im willing to give a deal to 5 guys to try out and give feedback at a discount.
PM for details. We are still on for monday for the dyno test and full on pictures on monday..
Ive posted lots of DIY How_To's around here... Id be willing to do a full review on one of your headers, along with step by step install instructions. Feel free to read up on a few of my reviews posted in the How_To Section of this site.
PM me if interested. 😁
WRLEOThread starterSan Francisco · Nov 14, 2006#48Ok found a car local in San Francisco..
Will be dyno testing tommorrow.. :)
WRLEOThread starterSan Francisco · Nov 14, 2006#49 Originally Posted by Galavoxx
I just PM'd. Let's see what happens. I would love to get a header, although I've yet to get a CAI or an exhaust...
We'll see if we cna make a decent intake system also.. :)
GalavoxxSan Francisco · Nov 14, 2006#50 Originally Posted by WRLEO
Ok found a car local in San Francisco..
Will be dyno testing tommorrow.. :)
Yeah!!! That's me. I can't wait for that extra hp. Thanks Leo. See you at 9am.