Yarisworld Archive

HEADER & INTAKE R&D.

80 posts · 24,620 views · page 2 of 2

Replies continued

YamilRSan Diego, CA · Nov 14, 2006#51
Originally Posted by Chris07LB
Ive posted lots of DIY How_To's around here... Id be willing to do a full review on one of your headers, along with step by step install instructions. Feel free to read up on a few of my reviews posted in the How_To Section of this site.

PM me if interested. 😁

WRLEO, if I was you I'll take this offer very seriously, He's the top "HOW_To er" in this forum 🙇
KatanaUnder the hood! · Nov 15, 2006#52
Originally Posted by WRLEO
Im willing to give a deal to 5 guys to try out and give feedback at a discount.
PM for details. We are still on for monday for the dyno test and full on pictures on monday..

I am here when you manufacture a header for the 1.3lt engine.Just don't forget me.
ItsMyDailyLos Angeles, CA · Nov 15, 2006#53
Originally Posted by WRLEO
Ok found a car local in San Francisco..
Will be dyno testing tommorrow.. :)
I hope you guys also do a stock dyno before dynoe with the header. that way we see gains by comparing both graphs.
GalavoxxSan Francisco · Nov 15, 2006#54
Originally Posted by ItsMyDaily
I hope you guys also do a stock dyno before dynoe with the header. that way we see gains by comparing both graphs.
They plan to. I dropped the car off this morning. Hope to pick it up soon.

👍
ViolinNew Jersey · Nov 15, 2006#55
🤤
WRLEOThread starterSan Francisco · Nov 15, 2006#56
Ran into some fitment problems with the Header.
Back to the drawing board it didnt bolt completely up to the exhaust.
We will bring this post back very soon.

To be continued.
WRLEOThread starterSan Francisco · Nov 15, 2006#57
Just as a Teaser.
This ii what the Header & Intake together made as far as Power.
We could only bolt one of the downpipe bolts to the header, so it was kind of like semi open exhaust, but it will give you guys an idea of how much it will produce with a exhaust system put on, since the car had stock exhaust.

Picture not included in this copy

Cheers..
Black YarisToledo, OH · Nov 15, 2006#58
Hmmm 16.5HP and 16.8 FT/lb of torque.... that is a pretty good gain for bolt ons... can't wait for my headers and exaust to come in
GalavoxxSan Francisco · Nov 15, 2006#59
Torque gains are all over huge. I can't wait!!
GalavoxxSan Francisco · Nov 15, 2006#60
Originally Posted by Galavoxx
Torque gains are all over huge. I can't wait!!
was that english...😁
ItsMyDailyLos Angeles, CA · Nov 15, 2006#61
wow that is very impressive considering the fitment issue. can't wait for final product and last results.
spkrman2 · Nov 16, 2006#62
Originally Posted by ItsMyDaily
wow that is very impressive considering the fitment issue. can't wait for final product and last results.
x2, interested 😎
ItsMyDailyLos Angeles, CA · Nov 16, 2006#63
I'm curious now because I just realized you mentioned the use of an intake also, is that correct? What type of intake was used, and any pics of it?
WRLEOThread starterSan Francisco · Nov 16, 2006#64
Yes our intake was put on the car.. if you look at the perf mod's section i posted a seperate thread about the intake.
ecoAtlanta · Nov 16, 2006#65
Will the fitment problem be taken care of before release,when will it be released.Im seriously thinking of going with WR.
ecoAtlanta · Nov 16, 2006#66
Will WR allow a GB for these headers.
ItsMyDailyLos Angeles, CA · Nov 16, 2006#67
Originally Posted by eco
Will the fitment problem be taken care of before release,when will it be released.Im seriously thinking of going with WR.
converting to the 4-2-1 now eh 😉
j/k I would wait to see final results also before choosing one design over another. Besides the Megan does not have any dyno as of yet.
WRLEOThread starterSan Francisco · Nov 16, 2006#68
The header will be fixed of course before sale.. dont think anyone will buy a header that doesnt kit.. lol..
YamilRSan Diego, CA · Nov 16, 2006#69
Since most of us own the AEM or TRD CAI, can you throw some number for us? Also you mentioned a posibility of a group buy?

ps. don't forget to become a supporting vendor, so that will continue to kick ass with this forum
kngrsllSpartanburg, SC · Nov 16, 2006#70
i wasnt planning on buying anything power wise other than a panel filter and axle back exhaust, but if those numbers hold up, i would reconsider!
KatanaUnder the hood! · Nov 16, 2006#71
Mr WRLEO please consider making a header for my poor little 1.3lt engine!!
ViolinNew Jersey · Nov 17, 2006#72
Originally Posted by WRLEO
Just as a Teaser.
This ii what the Header & Intake together made as far as Power.
We could only bolt one of the downpipe bolts to the header, so it was kind of like semi open exhaust, but it will give you guys an idea of how much it will produce with a exhaust system put on, since the car had stock exhaust.
I hope you'll be doing a dyno run with just the header for comparison purposes (once you get the fitment right).

Does yours ship with new gaskets?
CASTREXCosta Rica · Nov 20, 2006#73
Any updates??????????????
WRLEOThread starterSan Francisco · Nov 20, 2006#74
were going to work on it very soon.
we tried to fit a scion xb header, it is slightly different.
KatanaUnder the hood! · Nov 21, 2006#75
What about the 1.3lt engine header?
ChinoCharlesOH · Nov 21, 2006#76
Hah, poor Katana. 🙁

Swap that shit dude!
WRLEOThread starterSan Francisco · Nov 21, 2006#77
We dont have 1.3L in the states..
So it's kinda hard to make something without a car to make it from.
the_saintOmaha, somewhere in middle america · Nov 21, 2006#78
I would think there has to be somebody that makes parts for the 1.3, just not anyone in the states. Search around the european market, you should be able to find something there.
Or else you could learn Japanese...
ViolinNew Jersey · Nov 21, 2006#79
Learn to weld Katana.
KatanaUnder the hood! · Nov 23, 2006#80
Guys I have spent many hours on the net and there is nothing to do for N/A tuning in that engine...

However, Daihatsu sells it in the YRV Turbo model and it has 135hp!