SimmZOriginal postQuebec · Oct 23, 2006#1I don't want to start a debate, but I just want to warn your seriously about the Konig Helium wheels. Even if you don't drive you car heavily or do race, the Konig Helium are VERRRRRY easy to broke even with no "low-profile" tires. They may be VERY dangerous! I've always loved these wheels, but this is before watching that video and looking at this picture!
The main problem of the Konig Helium is the material used to build the wheel. Because they want to do a
very cheap priced and very light weight wheels, they don't use light high-quality alloys because it's too much expensive. They just design a wheels with a very thin design and
use some LOW DENSITY alloys who it light, but break as easy as glass!
Here's the picture to begin, let's notice this is not a low-profile tire... :
Picture not included in this copy Here's the video :
http://photoshow.comcast.net/watch/A...12ca2f41436652 Unfortunately, there's PLENTY of horror story about the Konig Helium all over the web...
Replies 68
ChinoCharlesOH · Oct 23, 2006#2Pictures don't lie...
OK YarisFrederick, OK · Oct 23, 2006#3 Originally Posted by SimmZ
Unfortunately, there's PLENTY of horror story about the Konig Helium all over the web...
Unfortunately, I only found one thread on a Honda forum...........
hasher22Australia Sydney · Oct 23, 2006#4Obviously if something is really cheap its obviously low quality.
SimmZThread starterQuebec · Oct 23, 2006#5Right. The price of the Konig Helium may be very attractive, but how they can offer a very cheap and light weight product? By using the "crappiest" material to build thier wheels...
You can buy many others cheap priced wheels, like BSA, IKON/ICON or Eagle-Alloys brands. They all build very cheap priced wheels. They are not light weight, but at least they are safe and they will not kill yourself on the road.
SimmZThread starterQuebec · Oct 23, 2006#6 Originally Posted by OK Yaris
Unfortunately, I only found one thread on a Honda forum...........
That's probably because you don't know where to look at. The picture of the bronze Helium are coming from a Mazda owners forum but I have to admit I don't know where the video are coming from.
SimmZThread starterQuebec · Oct 23, 2006#7 Originally Posted by ChinoCharles
Pictures don't lie...
You speak the truth!! 👍
ViolinNew Jersey · Oct 23, 2006#8What "video"? I only saw a slideshow.
Looks like a pretty good gouge behind the one spoke. What could have caused that?!
mheroThailand · Oct 23, 2006#9I am wondering how this rim got cracked!!
mine wasn't cracked like that .. but ....
see for yourself; this was after my Yaris ran
over a big hole on the road @ speed 40-50 km/hr
1 attachment not included in this copy
C2AUTOSPLLoma Linda, CA · Oct 23, 2006#10ack that looks scary...
Ric n Sov's Vitz RSToronto, Ontario, Canada · Oct 24, 2006#11I have personally seen wheels like that come into my friends shop after a little drunk driving in a echo hatch here in toronto.... I was told that it just tapped the curb.. But 2 of them looked just like that picture.
-Rick
skcSurrey, B.C. · Oct 24, 2006#12damn.. thats scary..
i had heliums on my last car and had no problem
glad i sold the rim tho..
u get what u pay for..
SimmZThread starterQuebec · Oct 24, 2006#13Yes that's true. You get what you pay for... while others light weights wheels cost around 200$ a wheel, the Konig Helium who are light weight cost 90$ a wheel... it doesn't make sense for me.
In fact, the low density alloy process is easy to understand; you have many empty particles in the alloy structure (it's like a Gruyere cheese!), this result in a light weight structure, but easy to break as glass.
ecoAtlanta · Oct 24, 2006#14Thats why I got rims that look like they can handle alot of pressure.
Picture not included in this copy
slvryarisIndiana · Oct 24, 2006#15Ahhh yes and thats why I hate low profile tires. I liked the little song that played with the video. It made me want to go get a gun and shoot myself. Looks like someone had too much time on their hands. All he had to do was post some pics and say what happened. The guy probably took it off a jump or something 😲
hasher22Australia Sydney · Oct 30, 2006#16 Originally Posted by eco
Thats why I got rims that look like they can handle alot of pressure.
Picture not included in this copy
me like ur rims....reminds me of xena
ViolinNew Jersey · Oct 30, 2006#17This part makes me think they might have abused them a bit:
Picture not included in this copy
LafiroNYC · Oct 30, 2006#18Hmm wow, how is it that it does not completely break on lets say a sharp enough turn? Thats very scary.
captainzerocoolHuntsville, Ala · Nov 8, 2006#19 Originally Posted by Violin
This part makes me think they might have abused them a bit:
I think that is just the sticky left from wheel balancing.
echo_hatchtoronto · Nov 8, 2006#20Thats a shame. I guess if you want light weight wheels you should stick to wheels that are made from forged aluminum. They cost more but the difference is in the quality. I have Centerline Storms which are made from forged billet aluminum... they cost me alot but I know the quality and strength are there. My wheels are 17x7 and they weigh approx. 14lbs each.
Ed
riceboyCAN · Nov 8, 2006#21 Originally Posted by captainzerocool
I think that is just the sticky left from wheel balancing.
+1
ViolinNew Jersey · Nov 8, 2006#22prolly right.
argylesocksmanch · Nov 8, 2006#23ugh. that song!! .... ugh.
that was quite possibly the gayest slide show i have ever seen.
Black YarisToledo, OH · Nov 8, 2006#24 Originally Posted by eco
Thats why I got rims that look like they can handle alot of pressure.
not the brightest thing to do there buddy, you are actually supposed to lower your air pressure the larger wheel you go with... and I used to live in Jonesboro, the roads in Atlanta area are nice, no real need to worry about pot holes, just take it easy on some of those curbs
raz0rbladez909Norfolk, VA · Nov 10, 2006#25guess thats what happens when you buy Volk ce28 knockoffs the real deal is forged thats why they are more pricey
BillsteinSo. Ca. · Nov 10, 2006#26I broke a 18" making a left and running over a manhole cover.
Ok I was doing about 40ish and the lid was raised a bit.
They did handle great. I down sized to 17s.
That was seven years ago,Im sure
rims are much stronger today.
Russelt3hPirateEpcot · Nov 10, 2006#27i jumped a curb sideways at 65 in my wrx with a set of Prodrive P1s and they didn't fall apart, hell they still held air!
Wheels are not suppose to fall apart! I don't care how cheap they are, they aren't suppose to fall apart.
the_saintOmaha, somewhere in middle america · Nov 10, 2006#28 Originally Posted by Billstein
I broke a 18" making a left and running over a manhole cover.
Ok I was doing about 40ish and the lid was raised a bit.
They did handle great. I down sized to 17s.
That was seven years ago,Im sure
rims are much stronger today.
Doubt it. Cheap rims have probably gotten cheaper (in terms of quality) over the last few years. The 'custom' wheel market has continued to grow and as a result
all kinds of no-name knock off wheel brands have been popping up. Most of the knock offs are probably made by the same manufaturer...in some basement in China.
Russelt3hPirateEpcot · Nov 11, 2006#29even the super over priced HREs and iForged wheels are terrible quality.
HREs are banned at many tracks in the US b/c they have been known to fall apart.
kngrsllSpartanburg, SC · Nov 11, 2006#30i've heard that, and its about the most expensive wheel you can buy. i've never heard of volks breaking, but i have heard of them getting bent. doh! SSR and BBS are two good wheel companies as well.
raz0rbladez909Norfolk, VA · Nov 11, 2006#31Breaking and bending are two completely different things, you can repair a bent wheel, a broken wheel however good luck. wheels like anything else that goes on your car, we'll you get what you pay for. If you want to go cheap on something that is pretty much keeping your life in jeopardy i'd be willing to pay a pretty penny, not on all this knockoff crap that is going around. Volk's, Work Wheels, Yokohama Advan, SSR, Enkei, etc. etc. are all higher priced because they make quality, don't go cheap on something that you must rely on every day of the week to function properly, just because its a cheap car doesnt mean you have to put cheap, poor made parts on it
spkrman2 · Nov 17, 2006#32 Originally Posted by Russelt3hPirate
Wheels are not suppose to fall apart! I don't care how cheap they are, they aren't suppose to fall apart.
AMEN!
PhasedWalkertoronto · Jul 17, 2009#33Huh notice this on google search, anyways i've got a set of heliums on my old car before for 2+ years. It's scratched up and all but no structure damage, end up sold it for a good price too maybe is just old batchs!;)
yarisugiハワイ · Jul 17, 2009#34What country to Konigs originate from?
I'm a devout "Made in Japan" rim.
Bob Dogthe Boondocks, NC · Jul 17, 2009#35I have heard about negative things about heliums on both a honda site and a minicooper site
schleppyBoston, MA · Jul 17, 2009#36I have a few thousand miles on mine and so far so good...
TreyzLong Island, NY · Jul 17, 2009#371) Way to bring a thread from the grave, lol
2) They are made here on Long Island. Their headquarters is in Nassau County.
3) They have said the same about ROTAS
ChinoCharlesOH · Jul 17, 2009#38I didn't know that Treyz! Cool, I like Konig better now. Born in the USA.
Erm, I've got at least 25K on mine and they still look brand new. Black finishes FTW lol.
Bob Dogthe Boondocks, NC · Jul 17, 2009#39I've got Konig wheels myself, just not helium: cheap + lightweight + thin spokes = fragile
TreyzLong Island, NY · Jul 17, 2009#40 Originally Posted by echo_hrs ↑
People take a budget priced cast wheel set to track day and abuse the piss out of them, and then are shocked when one cracks...
When you pay $90 per wheel for instance, versus $600 a piece forged Volks, there is going to be a big difference in strength...
Cheers
Forged = 🤤
devinlamotheSudbury, Canada · Jul 17, 2009#41So I've had my Konig Helium's on for about 67,000km on REALLY crappy roads and I've had no issues what-so-ever.
Then again I'm running a strong tire to help with the rough roads too.
marlondogLost Angeles · Jul 20, 2009#42Nothing wrong with Heliums. People hate on them because they are knock-off's of some Volk wheels. Every wheel can be cracked just like any tire can be popped. If you have super low-profile tires and you hit a pothole, chances are that your wheels may receive some damage. Good idea to have some nice rubber to protect your wheels, or else you might end up like one of those poor bastards that had there wheels and hearts broken.
johnnypaseoSocal SF valley · Jul 20, 2009#43SabretoothSt Cloud FL · Jul 20, 2009#44I dont even think its about tracking the car. I mean really, its just about how much abuse you give the rim. People think a $60 rim is gonna take similar abuse to a $200 rim.
Rotas are a decent rim, I have a set of Torque's on my car, and havnt had a problem with over 15,000 miles on them, and they have seen their share of potholes and spirited driving.
Do I plan to use them as track rims, no.
Will they see a track during their lifetime, you can bet on it.
Also there is the matter of how much HP you are thowing at them, I dont understand how anyone can throw cheap rims on a 500 HP car and think that they wont affected by the amount of torque that you are tossing at them... I dont think a Yaris will be able to snap a set of Rota's, unless your really doing rallycross with them. lol.
Cheap + Quality + Lightweight, you cant have all three...
anonymous userwindward oahu · Jul 20, 2009#45 Originally Posted by
Sabretooth ↑
Cheap + Quality + Lightweight, you cant have all three...
Ahhh the racers holy triangle. Similar to cheap, fast, and reliable.....pick 2 of 3. 👍
silver_echoSpokane, WA · Jul 20, 2009#46 Originally Posted by
Sabretooth ↑ I dont even think its about tracking the car. I mean really, its just about how much abuse you give the rim. People think a $60 rim is gonna take similar abuse to a $200 rim.
Rotas are a decent rim, I have a set of Torque's on my car, and havnt had a problem with over 15,000 miles on them, and they have seen their share of potholes and spirited driving.
Do I plan to use them as track rims, no.
Will they see a track during their lifetime, you can bet on it.
Also there is the matter of how much HP you are thowing at them, I dont understand how anyone can throw cheap rims on a 500 HP car and think that they wont affected by the amount of torque that you are tossing at them... I dont think a Yaris will be able to snap a set of Rota's, unless your really doing rallycross with them. lol.
Cheap + Quality + Lightweight, you cant have all three...
Originally Posted by
anonymous user ↑ Ahhh the racers holy triangle. Similar to cheap, fast, and reliable.....pick 2 of 3. 👍
don't forget the mechanics trifecta... time, price, quality; pick two...
SabretoothSt Cloud FL · Jul 20, 2009#47Oh, and for those wanting to know where rotas are made, mine were ordered from the phillipines, then shipped to california, then to me.
BrazdonWColumbia, MD · Jul 20, 2009#48nothing wrong with konig helium's at all
Bob Dogthe Boondocks, NC · Jul 20, 2009#49The word about Heliums has made me wonder about Britelites as well. Any horror stories about them?
johnnypaseoSocal SF valley · Jul 20, 2009#50Havent heard anything about motegi rims i've had them on my paseo for 4 yrs been trying to search that on the net tho lol