Yarisworld Archive

Just wanted to share this: turbo 1NZFE

35 posts · 63,143 views

as400g33kOriginal postAustralia · Oct 12, 2006#1
Picture not included in this copy

Found this, a turbo 1NZFE. The car is a Thai Vios, a Southeast Asia market-only car. It has basically the same internals as the old Echo. Here's an excerpt:

Now we come to the juicy bits. The 1.5 16 valve DOHC VVT-i 1NZ-FE engine has been turbocharged with light boost pressure as the compression ratio of the engine is still quite high for a turbo-ed engine at 10.5:1. Normal for a bolt-on setup. The ECU has been upgraded to detect boost and adjust air-fuel appropriately.

This results in 143 horsepower at 6400rpm and 196Nm of torque at 4400rpm. The gearbox is a 5-speed close ratio gearbox for maximum acceleration. This takes the car from 0-100km/h in 8.1 seconds. The car does the 400meter sprint at 15.9 seconds.

I suppose if you can lower the compression to something like 9:1 you could boost it up higher and get even better performance out of it.
More here.

Replies 34

KatanaUnder the hood! · Oct 12, 2006#2
Υοu can have the same result with a TTE supercharger and you keep the warranty intact!
eTiMaGoBangkok, Thailand · Oct 12, 2006#3
Very interesting and quite rare car, this vios turbo...
paultyler_82USA · Oct 12, 2006#4
that's one of the reasons the 1NZ cant be force fed large pressures is the compression ratio...
eTiMaGoBangkok, Thailand · Oct 12, 2006#5
as far as I understand shorter piston rods would reduce the compression ratio, right?
07WYarisRSRidgeway Ontario · Oct 12, 2006#6
Originally Posted by eTiMaGo
as far as I understand shorter piston rods would reduce the compression ratio, right?
That changes the stroke and you will lose too much torque.

Better off changing the pistons to change the compression or simply rechamber the head domes.
ChinoCharlesOH · Oct 12, 2006#7
You'll see TRD USA with a FI option within a year in the states.
paultyler_82USA · Oct 13, 2006#8
Originally Posted by eTiMaGo
as far as I understand shorter piston rods would reduce the compression ratio, right?
yes it would, but it would have undesirable side effects, best thing would be to go with a lower compression piston... an 8.5:1 would probably be great for a FI 1NZ

Originally Posted by ChinoCharles
You'll see TRD USA with a FI option within a year in the states.
I dunno... I seem to hold little faith in TRD these days, with the vehicles they've neglected, as well as their tendancy to price gouge for parts.
ChinoCharlesOH · Oct 13, 2006#9
Originally Posted by paultyler_82
I dunno... I seem to hold little faith in TRD these days, with the vehicles they've neglected, as well as their tendancy to price gouge for parts.
I'm new to the Toyota scene so my knowledge on the subject is limited, but so far I don't think they're all that bad. All of their parts so far seem to be competitively priced with other aftermarket options, however sparce they may be. I don't see Toyota neglecting the Yaris... the aftermarket demand goes up every time a male under the age of 30 buys one, and these days that line is blurring more and more. My stepdad is 38 and I just convinced him to put HID fogs on his 325xi, haha.

Case in point, look at the demographic this forum feeds off of. How much money is spent on YW.com alone in a week on the Yaris aftermarket? Better yet, ask the sponsor's wallets. 🙌

But yes, when TRD does come out with a FI kit, I agree... it is going to be one expensive box.
KatanaUnder the hood! · Oct 13, 2006#10
Well it will be expensive, but you get to keep the warranty!
AdamantiteWay south... · Oct 18, 2006#11
Originally Posted by paultyler_82
yes it would, but it would have undesirable side effects, best thing would be to go with a lower compression piston... an 8.5:1 would probably be great for a FI 1NZ
Pistons such as these:
http://www.zeropointindustries.net/s...products_id=77
mikeukrainetzCanada · Oct 18, 2006#12
Thicker head gaskets work as well, so long as you dont buy them from 'Freds Discount Gaskets'....
This doesnt usually net you too much in the CR department, only helps.
If your going to rebuild the engine look at buying a totalled xB and pull the motor.
paultyler_82USA · Oct 18, 2006#13
Originally Posted by Adamantite
EXACTLY like those!

Originally Posted by mikeukrainetz
Thicker head gaskets work as well, so long as you dont buy them from 'Freds Discount Gaskets'....
This doesnt usually net you too much in the CR department, only helps.
If your going to rebuild the engine look at buying a totalled xB and pull the motor.
As long as you don't overdo it on the boost, the OEM gasket should hold up fine, but if you want extra insurance I would get some better gaskets, and while you're at it, some better head bolts... I wonder if ARP makes some for the 1NZ-FE
eTiMaGoBangkok, Thailand · Nov 9, 2006#14
Just to give an impression of the performance difference with a Vios Turbo...

About a week ago, my friend and I went to pick up another friend from the airport. Keep in mind none of us are lightweights, between 80 to 90kg each.

Anyway we're on the way home, my friend is driving, the other friend just shooting video of the sights, and a Vios turbo zooms past... We tried to catch up, and you can see the rest for yourself here:

http://www.youtube.com/watch?v=jOa_z73WDGQ
ViolinNew Jersey · Nov 9, 2006#15
Ha! He kicked your asses!
eTiMaGoBangkok, Thailand · Nov 9, 2006#16
dude three fat guys in a yaris, with luggage... whaddaya expect?
punchBarrie, ontario · Nov 9, 2006#17
Originally Posted by eTiMaGo
Just to give an impression of the performance difference with a Vios Turbo...

About a week ago, my friend and I went to pick up another friend from the airport. Keep in mind none of us are lightweights, between 80 to 90kg each.

Anyway we're on the way home, my friend is driving, the other friend just shooting video of the sights, and a Vios turbo zooms past... We tried to catch up, and you can see the rest for yourself here:

http://www.youtube.com/watch?v=jOa_z73WDGQ
I thought you did pretty good, he needed more room to play!!
RossPPaphos, Cyprus · Nov 10, 2006#18
Picture not included in this copy

I feel sorry for all you guys, we have loads of turbo Vitz here...
AdamantiteWay south... · Nov 11, 2006#19
Originally Posted by RossP
I feel sorry for all you guys, we have loads of turbo Vitz here...

What do you guys use for engine management?
RossPPaphos, Cyprus · Nov 12, 2006#20
They're standard cars from Japan ;)

Although one of the guys that has a Blitz supercharger is using GReddy E-Manage
KatanaUnder the hood! · Nov 14, 2006#21
Lucky you RossP!!!
DTM_YarisDulles, VA · Dec 9, 2006#22
Just to clear a couple of things up, Changing the length of the rods does not change stroke. Only a crank change will change stroke.
The best way to get lower compression would be from a dish piston will good solid valve reliefs and 2618 alloy.
That is what I designed for my Yaris for 9.5:1 compression and a turbo.
spkrman2 · Dec 10, 2006#23
Originally Posted by DTM_Yaris ↑
Just to clear a couple of things up, Changing the length of the rods does not change stroke. Only a crank change will change stroke.
The best way to get lower compression would be from a dish piston will good solid valve reliefs and 2618 alloy.
That is what I designed for my Yaris for 9.5:1 compression and a turbo.
sweet
mcdaddySaudi Arabia · Dec 16, 2006#24
Originally Posted by eTiMaGo ↑
Just to give an impression of the performance difference with a Vios Turbo...

About a week ago, my friend and I went to pick up another friend from the airport. Keep in mind none of us are lightweights, between 80 to 90kg each.

Anyway we're on the way home, my friend is driving, the other friend just shooting video of the sights, and a Vios turbo zooms past... We tried to catch up, and you can see the rest for yourself here:

http://www.youtube.com/watch?v=jOa_z73WDGQ
wow!! nice chase!!👍
YarisGuyUSA · Dec 17, 2006#25
Originally Posted by ChinoCharles ↑
You'll see TRD USA with a FI option within a year in the states.
Can you do me a favor and share a links or url?
foufoutosxAthens-Greece · Aug 16, 2009#26
has anyone got any idea WHAT is the stock turbocharger that the VITZ RS TURBO 1.5L uses?

Thanks
cali yarisCanoga Park, CA · Aug 16, 2009#27
another thread raised from the dead -- I'm glad they aren't deleted, we can see where we were two years ago.
ChinoCharlesOH · Aug 16, 2009#28
Haha, oh... untamed optimism.
CASTREXCosta Rica · Aug 17, 2009#29
Originally Posted by foufoutosx ↑
has anyone got any idea WHAT is the stock turbocharger that the VITZ RS TURBO 1.5L uses?

Thanks
It's a IHI RhF4.
malachi456New Zealand · Apr 25, 2013#30
Are you running a 1 litre Vitz turbo? I have seen one here in NZ as well.
malachi456New Zealand · Apr 25, 2013#31
Originally Posted by as400g33k ↑
Picture not included in this copy

Found this, a turbo 1NZFE. The car is a Thai Vios, a Southeast Asia market-only car. It has basically the same internals as the old Echo. Here's an excerpt:



More here.
What you want is a Vitz Turbo 1500 (possibly local Japan market only). This is an excerpt of the Juicy Stuff: "More powerful brakes and a firmer suspension calibration were also fitted to the "RS", which was later modified by Toyota Racing Development (TRD) and outfitted with a turbocharger. Produced in limited numbers, the TRD-tuned "RS" produced 120 kilowatts (160 hp) of power and offered a 0–100 kilometres per hour (0–62 mph) time of 7.0 seconds." (Wikipedia)
cali yarisCanoga Park, CA · Apr 26, 2013#32
Thread is nearly four years old. Awesome revival!
mazillaSan Jacinto California · Apr 26, 2013#33
Picture not included in this copy
Bluevitz-rsOshawa, Ontario, Canada · Apr 26, 2013#34
Originally Posted by ChinoCharles ↑
You'll see TRD USA with a FI option within a year in the states.
Picture not included in this copy
B2FiNiTYUS · Apr 26, 2013#35
that's a nice setup...