eTiMaGoOriginal postBangkok, Thailand · Oct 3, 2006#1Oh baby this thing looks hot in my engine bay 👍
Picture not included in this copy
And the sound now... if you didn't know you'd think there was a turbo in there somewhere 😁
And here's a little bit of Cusco lovin' with an oil catch tank, supposed to help the engine run cleaner... anyone have experience with this?
Picture not included in this copy
Replies 42
riceboyCAN · Oct 3, 2006#2Nice additions.. where does the CAI end up?
eTiMaGoThread starterBangkok, Thailand · Oct 3, 2006#3just there... if you look at the piece of metal right in front, there is a hole there, so it gets pretty fresh air through the grille, and with a much lower risk of getting water splashing in.
KatanaUnder the hood! · Oct 3, 2006#4Nice.
How much did it cost?Did you see any difference?
vodkalushRochester, NY · Oct 3, 2006#5links??
eTiMaGoThread starterBangkok, Thailand · Oct 3, 2006#6roughly US$130?
Engine's actually smoother, with the stock intake it sometimes seems to choke up when shifting gears, now it's a lot better... and it just sounds wicked 😁
eTiMaGoThread starterBangkok, Thailand · Oct 3, 2006#7KatanaUnder the hood! · Oct 3, 2006#8Νice!
Great value for money.
ViolinNew Jersey · Oct 3, 2006#9I like!
vodkalushRochester, NY · Oct 3, 2006#10thanks for the links!
eTiMaGoThread starterBangkok, Thailand · Oct 3, 2006#11full engine bay shot, forgot to put this up!
Picture not included in this copy
KatanaUnder the hood! · Oct 3, 2006#12Τhe blue tube is for what?Oil steam?
eTiMaGoThread starterBangkok, Thailand · Oct 3, 2006#13the single blue tube? to be entirely honest I didn't completely understand the explanation, something to do about fuel injection, it connects to this thing:
Picture not included in this copy
KatanaUnder the hood! · Oct 3, 2006#14Oh ok!Tnx
eTiMaGoThread starterBangkok, Thailand · Oct 5, 2006#15Voltage stabilizer + grounding harness installed!
Picture not included in this copy
This engine bay's starting to look like a damn rainbow... Just need a yellow engine cover, purple anodized parts here and there... 😁
johnnyfiveMilwaukee WI · Oct 5, 2006#16just need to replace those screw down hose clamps on the intake, and maybe color matched/constrasing zip ties :)
KatanaUnder the hood! · Oct 5, 2006#17Υou are lucky, my engine bay is so empty!
It almost begs me for a T25!!!
RossPPaphos, Cyprus · Oct 5, 2006#18 Originally Posted by eTiMaGo
the single blue tube? to be entirely honest I didn't completely understand the explanation, something to do about fuel injection, it connects to this thing:
Picture not included in this copy
Please don't tell me thats a fake dump valve...
eTiMaGoThread starterBangkok, Thailand · Oct 5, 2006#19well I managed to understand a bit more information about it, it's some kind of electric air pump to feed more air into the intake. I'm very confused as to its function, but most yaris owners here seem to swear by it. It's not one of those gimmicky air twirlers or fuel atomizers or whatnot, at least!
KatanaUnder the hood! · Oct 5, 2006#20I am curious, your car has stuff into it that you have paid for them and u don't know what they do?
Dont take any offence mate, just curious.
hosmerProvidence RI · Oct 5, 2006#21 Originally Posted by eTiMaGo
the single blue tube? to be entirely honest I didn't completely understand the explanation, something to do about fuel injection, it connects to this thing:
Picture not included in this copy
Its just looks like a breather...but instead of sitting on the valve cover, its just got a tube and been relocated over to the shock tower
Example of one on the valve cover:
Picture not included in this copy ItsMyDailyLos Angeles, CA · Oct 5, 2006#22 Originally Posted by eTiMaGo
Voltage stabilizer + grounding harness installed!
Picture not included in this copy
This engine bay's starting to look like a damn rainbow... Just need a yellow engine cover, purple anodized parts here and there... 😁
hows it feel? improvements? and what type are those?
eTiMaGoThread starterBangkok, Thailand · Oct 5, 2006#23 Originally Posted by Katana
I am curious, your car has stuff into it that you have paid for them and u don't know what they do?
Dont take any offence mate, just curious.
Hahaha I know what you mean, the problem is, I can speak decent Thai, but not so well when it comes to technical things, even with a friend to help me, so I have to rely on the little I understand and other peoples' recommendations and my knowledge of an engine's working.
And I think hosmer has hit the nail right on the head, it would most certainly be a breather (CAI breather? 😁)
ItsMyDaily, there is a bit of power improvement, but most importantly the engine is a lot smoother. It's almost impossible to stall (I could go from a standing start in 3rd gear), and whereas the engine would sometimes shudder a bit when changing gears, now it's just smooth as silk. 👍
ItsMyDailyLos Angeles, CA · Oct 5, 2006#24 Originally Posted by eTiMaGo
ItsMyDaily, there is a bit of power improvement, but most importantly the engine is a lot smoother. It's almost impossible to stall (I could go from a standing start in 3rd gear), and whereas the engine would sometimes shudder a bit when changing gears, now it's just smooth as silk. 👍
👍 sounds good. Your engine bay looks great, now all you have to do is remove tht plastic cover over the valve cover and paint the valve cover red!🤘
eTiMaGoThread starterBangkok, Thailand · Oct 5, 2006#25 Originally Posted by ItsMyDaily
👍 sounds good. Your engine bay looks great, now all you have to do is remove tht plastic cover over the valve cover and paint the valve cover red!🤘
I'm very tempted to do so, but with the plastic injectors and all other stuff on top of the engine block, it does not look so nice... So maybe I'll change the cover to a carbon fibre one and a red aluminium oil cap, that would also look pimp!
ItsMyDailyLos Angeles, CA · Oct 5, 2006#26^ you my friend have good taste 👍
eTiMaGoThread starterBangkok, Thailand · Oct 5, 2006#27 Originally Posted by ItsMyDaily
^ you my friend have good taste 👍
Thanks, but also big props to my friend who's been handling most of this while I've been stuck at work 🤘
KatanaUnder the hood! · Oct 6, 2006#28I see.Great engine bay.
Chris07LBNew Jersey · Oct 6, 2006#29Hummm.. I know a distrubitor for those intakes, maybe I can see about a GB.
AdriaanMontreal · Oct 14, 2006#30a GB for the intake would be great since i'm having a hard time to find a place here in canada to get them.
Chris07LBNew Jersey · Oct 14, 2006#31Didnt see any responces that were interested, but I will follow thru anyway and post back. 🤘
johnnyfiveMilwaukee WI · Oct 14, 2006#32is it an actuall intake, or jsut a filter box, and some hoses?
eTiMaGoThread starterBangkok, Thailand · Oct 15, 2006#33It's basically just the filter cylinder, and the workshop here added the tubing.
I'm still quite sure that the TRD or AEM intakes would give much better results, horsepower-wise.
eTiMaGoThread starterBangkok, Thailand · Mar 21, 2007#34Just a little update, I removed the angled horn-looking thing in the front of the intake some time ago, to try and free up the airflow. Power wise, it feels the same, but there's a nice extra roar when the pedal hits the metal 😁
1 attachment not included in this copy
Kaotic LazagnaCentral Valley, CA · Mar 21, 2007#35looks nice. man, i envy you. lol...
Vic-2NZFEPanama · Mar 21, 2007#36First time i see this intake for Yaris, looks good and it seems works good too 😁
eTiMaGoThread starterBangkok, Thailand · Mar 21, 2007#37ah it's not that great, 180 degree bends are not exactly good for air flow!
mojoyarisVancouver · Apr 27, 2007#38 Originally Posted by
eTiMaGo ↑ Oh baby this thing looks hot in my engine bay 👍
Picture not included in this copy
And the sound now... if you didn't know you'd think there was a turbo in there somewhere 😁
And here's a little bit of Cusco lovin' with an oil catch tank, supposed to help the engine run cleaner... anyone have experience with this?
Picture not included in this copy
I am planning on putting in an oil catch tank and was looking at the Cusco one as well. For those times when you are running your car hard and doing alot of fast hard turns like when you are in the solo slalom event. It catches the oil and sludge that comes out of your intake and maintains the airflow from getting gunged up. This is all I really know, but I think it will help in the long run if you are doing performance driving at the weekend track and keep the engine internals clean.
Was there any reason you had it installed?
nun73SIAM · Apr 27, 2007#39 Originally Posted by
eTiMaGo ↑ roughly US$130?
Engine's actually smoother, with the stock intake it sometimes seems to choke up when shifting gears, now it's a lot better... and it just sounds wicked 😁
🎉 I agree with you! Sound good when you shift up or kick down for accle! Torque coming and rpm running faster than factory filter and intake box.
Link to a thread or page that is not in the archive boyzBangkok · Apr 28, 2007#40Very nice simota air intake 👍
Do you got any idea for this model ?
Is your engine oil get dark easier?
and yr cusco oil tank is help to make your engine room clean is that right?
1 attachment not included in this copy
mojoyarisVancouver · Aug 12, 2007#41I've got my oil catch tank installed and wanted to find out about the tubing on your car.
The blue tubing from your catch tank that attached to the top right hand side of the head cover. Is this tubing really hard and doesn't soften with the heat the engine and header makes? I've had two types installed already, one harder than the other, but even the harder one still collapses like a vacuum is sucking it shut. If you can tell me what kind of tubing you have. That'd be greatly appreciated.
redduckPittsburgh · Aug 13, 2007#42What all did you buy to have that set up? obviously more than the filter right?
NabiscoTampa · Aug 13, 2007#43Looks good! I like that intake design!
An oil catch can is usually to go between the valve cover and intake pipe or PCV valve and intake pipe. It's function is to remove oil and or oil vapor from positive air coming from the valve cover and oil vapor induction in the intake. Usually you don't install these unless you have blow by. I don't have blow by on my engine but I wish to have clean intake. Oil vapor can lower fuel octane significantly.
You can fabricate one for under 20 dollars.