TinyGiantOriginal postRochester, NH · Jul 8, 2009#1Okay some of you have seen the hoods that microimage had that came in with poor fitment. I finagled my way into trading him for one.. After Trying it on the car I saw potential for sure.
Observations:
-The Drivers side was nice and tight to the body and contoured nice with the headlight. Above the headlight the side was a little tight.. so i have to trim that down a little.
-Passenger side was about 1/4 if not more off. its like the trimmed the hood or set it up like 1/4in toward the drivers side.
-The hood had a little bit of a bow to it .. when you clamp down the middle (in the cowl) of the hood to the inside of the hood it removed the bow.
- The front sits a tiny bit too high
So... Here was my thought. BONDO! rather than laying down fiberglass and dealing with that i figured bondo sets fast and sands easily.
I'll get some pics later on.
I used Bondo-glass .. its a bondo with some short fiber in it.
a while back when fixing some rust on an old camry my parents had a mechanic taught me a slick trick with bondo to get off to a good start.. WAX PAPER! Start out mixing the bondo according to the directions and be ready to work fast because it sets fast. I would reccomend doing a little at a time so that you dont end up a with a pile of hard bondo that you cant use.
Put a little bit of bondo on the top and bottom edge of the hood.
Then cut a piece of wax paper and apply it to the bottom enough hanging out that you can fold it over the top.
Put an appropriate amount of bondo on the waxpaper by the edge. you might do a little more than you need so you can have an easier time shaping after.
Fold the wax paper up and over and squish it a little so that you can smooth it out and make it the thickness you need. dont worry about how wide your edge is because we want something to be able to trim down.
keep doing this until you get a good 1" more of an edge.
after is hardened you can peel off the wax paper and you should have somewhat of a smooth surface to work with.. more harder will make it set faster so if you put a little more in it will set faster so you can wax paper it and hold it in place so you get the right curve on it .. its pretty hard in 3-5min or so.
At first i used a sanding block and some sandpaper but found this to be taking way too long since i made it quite thick in a couple spots 👎 So i decided to graduate up to a palm sander. This saved alot of effort but still took a good amount of time.
Sand that sucker and shape it .. its going to take a long time. I actually used a paint scraper to shape it to start to get the high spots down.
after a while of sculpting and sanding you should have a nice smooth surface with more of an edge.
Removing the Bow:
Clamp the hood in the middle
Sand a little around the middle and wipe it down
Bondo the top and bottom making sure to get some bondo in between the top and the bottom and make sure that it petrudes over the gap so that it will set and secure it.
Let it sit 30-40min to make sure its really set.
Remove the Clamp.. and viola! no more bow!
Sand the sucker to make it smoothed out .. just make sure not to sand too much that you lose the bridge between the gap that you made to bond the two parts together.
Fitment/sculpting edge: (i'll do this tomorrow when i do this step)
4 attachments not included in this copy
Replies 56
josevenezolanoVenezuela · Jul 9, 2009#2I can't wait to see the result I would like to get one of those hood.
1NZYaris1New Zealand · Jul 9, 2009#3Garms going to paddle my bonnet over too New Zealand , we should start
a sweeps stake on how long it will take too get here 😆
with or with out Garm . 🤣
TinyGiantThread starterRochester, NH · Jul 9, 2009#4lol
i got it pretty smooth last night after like 3hours of messing with it.. i just have to get it to line up today :)
i' got some air bubbles in the stuff that i discovered while sanding so i'll have to get something to fill those in before painting..
I also noticed the bondo is not as stiff as i thought it would be but right now its like 2" out from where it was so i expect it to be stiffer near the actual hood :) it'll be cool if i can get it to work.
I did notice when fitting it the other day that it seemed that the hood locked in a little high .. so i have to figure that out too
cali yarisCanoga Park, CA · Jul 9, 2009#5^ what a trooper, yeah!
YarisightCentral N.J. · Jul 9, 2009#6To TinyGiant, and anyone else buying these hoods.....
You may want to try installing hood pins instead of trying to layer bondo to fix the problem with warped sides. Instead of going through the trouble of bondo and sanding you *MAY* be able to get a good result with hood pins.
I installed a carbon fiber VIS Monster Reverse Cowl Hood on my Yaris...similar to the C-One design.
I don't know what the extent of the fitament issues are with the C-One replica hood you guys are dealing with without seeing it first hand, but when I put my VIS hood on I had no problems with the back sides. The only problem I had was with the front passenger side of the hood looked a little warped (about a little over an 1/8 of an inch off or so).
Not horrible, but I noticed it, and wanted it to sit perfect. When the hood pins were installed this problem was corrected, and everything sits nice and even now.
Obviously if you don't like the look of hood pins this is not an option, but if you were thinking of getting them, or didn't want to go the bondo sanding route with these particular hoods it may be an easier answer for you. Just throwing the info out there for anyone interested...don't know if it would work with these hoods. Just sharing my personal experiences.
Best of luck to you all...it is a great hood design....I'll be watching to see how you guys make out. 🙌
TinyGiantThread starterRochester, NH · Jul 9, 2009#7its not that the sides are warped.. its that the sides are cut too short.
i'll snap a pic of the bondo progess so far tonight .. i have too much screen printing to do to be able to play with it tonight :(
hopefully tomorrow!
PHXDEMONPhoenix, AZ · Jul 9, 2009#8In for pics.
1NZYaris1New Zealand · Jul 10, 2009#9I am going too reglass mine , if , i mean when Garm arrives 😁
👍
TinyGiantThread starterRochester, NH · Jul 10, 2009#10uploaded some pics.. i still have some sanding to do i think today i'll fit it and trim it to where it needs to be then i'll put the sanding time in again and fill the air bubble holes :) Then i'll prime it :)
severous01SE Texas · Jul 10, 2009#11if i'm paying 500 for a hood it better darn well fit perfect. i dont care if it's a replica, one-off, or factory hood. if i'm reading on someone's website 'direct fit'...'perfect finish' bla bla bla...then it better be what's being claimed or i'm gonna have issues.
the hood on the car is freakin tiny...how hard is it to make a decent mold and make a perfect fit hood. seriously. for me it'd take some time...i'm compulsive and have no idea what i'm doin with CF or FG. but i guarantee that if i made a mold it'd be perfect and would have perfect fit.
i also understand that every car isnt the same. but then again that's where mass production and the hood bumpers come in...and the mounting bolts as well.
TinyGiantThread starterRochester, NH · Jul 10, 2009#12 Originally Posted by
severous01 ↑ if i'm paying 500 for a hood it better darn well fit perfect. i dont care if it's a replica, one-off, or factory hood. if i'm reading on someone's website 'direct fit'...'perfect finish' bla bla bla...then it better be what's being claimed or i'm gonna have issues.
the hood on the car is freakin tiny...how hard is it to make a decent mold and make a perfect fit hood. seriously. for me it'd take some time...i'm compulsive and have no idea what i'm doin with CF or FG. but i guarantee that if i made a mold it'd be perfect and would have perfect fit.
i also understand that every car isnt the same. but then again that's where mass production and the hood bumpers come in...and the mounting bolts as well.
i traded garm some custom shirts for this hood. my costs are minimal and i got it expecting it to be a project :)
kngrsllSpartanburg, SC · Jul 10, 2009#13so does it weigh any less than the stock hood? i would guess not.
TinyGiantThread starterRochester, NH · Jul 10, 2009#14 Originally Posted by
kngrsll ↑ so does it weigh any less than the stock hood? i would guess not.
way less. i'll have to weigh it up to see how much.. but its alot lighter for sure
kngrsllSpartanburg, SC · Jul 10, 2009#15thats amazing. normally aftermarket hoods weigh more than the stock hood.
TinyGiantThread starterRochester, NH · Jul 10, 2009#16okay here are some pics after dremeling for a couple hours to sculpt the hood for a "good fit"
6 attachments not included in this copy
TinyGiantThread starterRochester, NH · Jul 10, 2009#17the white is the poweder from the bondo being sanded.. starting to come together nicely.
the passenger side fits great.. i think i did a better job than the mold.. lol it sits perfect on that side. I have to grind a little on the other side .. the topside along the wiper tray needs some work too.. its tight on the passenger side and like 1/4" on the other side .. so its either more bondo and shaping or grind the other side to match it lol
TinyGiantThread starterRochester, NH · Jul 10, 2009#18bondoing the center piece after clamping worked perfect. put the perfect bow to the hood like it should have had.
1NZYaris1New Zealand · Jul 11, 2009#19Well done 👏 👏 👏
can't wait too get my one 😳
Thats going too look bloody amazing 👍
PETERPOOPOahu · Jul 11, 2009#20great job!
TinyGiantThread starterRochester, NH · Jul 11, 2009#21Fixed the last edge :)
I gotta pat myself on the back a little.. I'm quite impressed with my craftmenship lol.. its the first time i've ever done anything like this.. I've plastered on bondo on rust spots and sanded .. but never sculpted anything like this before.. its all really level, contours well and super smooth! I cant wait to prime it today!
i did the top edge almost by memory and feel it was only high in one spot when i test fit it after the first shaping.
i cant wait to get this thing painted up :)
I found a vendor on ebay with blue carbon fiber vinyl that looks pretty real...lol but i think it would look kinda cheesy.. idk
7 attachments not included in this copy
TinyGiantThread starterRochester, NH · Jul 11, 2009#22its a tiny high on the drivers side.. but i dont forsee it bothering me too much.. its barely notice able and not something i can fix anyways
blacksandiegovitzJust chillin' out brah ! · Jul 11, 2009#23Looking good man , How many hours into it are you now ???
PatrickJohnsonMurfreesboro, TN · Jul 11, 2009#24i think i'm missing the point. If i paid that much for a hood, it will fit perfectly as it should or it will go back to the vendor. That is not normal or acceptable if you ask me.
AltitudeColorado · Jul 11, 2009#25 Originally Posted by
PatrickJohnson ↑ i think i'm missing the point. If i paid that much for a hood, it will fit perfectly as it should or it will go back to the vendor. That is not normal or acceptable if you ask me.
To wit.
Originally Posted by
TinyGiant ↑ i traded garm some custom shirts for this hood. my costs are minimal and i got it expecting it to be a project :)
PatrickJohnsonMurfreesboro, TN · Jul 11, 2009#26ah, i see. still kind of odd to see a body piece not fit that should. are they all this way from c-one?
1NZYaris1New Zealand · Jul 11, 2009#27 Originally Posted by
PatrickJohnson ↑ ah, i see. still kind of odd to see a body piece not fit that should. are they all this way from c-one?
That's why Garm is letting them go for $100. , bloody cheap if you have the time , and know how too fix them .👍
TinyGiantThread starterRochester, NH · Jul 11, 2009#28 Originally Posted by
blacksandiegovitz ↑ Looking good man , How many hours into it are you now ???
i have another hour into it today to get the top edge.. i bet now that iam using the palm sander and dremel to the edges i could have the whole hood done in like 1.5hours max now that i have the process down. the hood was passed off to my father inlaw today who will give it to his best friend who is the paint manager at Sanel who will paint/clearcoat it for probably $50 or less :) getting it done the same color as the car :)
can't wait to get it back!
TinyGiantThread starterRochester, NH · Jul 11, 2009#29 Originally Posted by
PatrickJohnson ↑ ah, i see. still kind of odd to see a body piece not fit that should. are they all this way from c-one?
its a c-one replica.. aka knock off..
i noticed today when holding up in the sun that there are some light patches on the fiberglass.. (more see through in spots) Overall thought now that i put the time into it. i'm happy .. can't wait to get it back!
PHXDEMONPhoenix, AZ · Jul 14, 2009#30Can't wait to see the finished result 👍
TinyGiantThread starterRochester, NH · Jul 14, 2009#31 Originally Posted by
PHXDEMON ↑ Can't wait to see the finished result 👍
me either.. lol i want to call and bug already to see if he did it :)
TinyGiantThread starterRochester, NH · Jul 26, 2009#32grr i want my hood back!!
lol the price you pay for cheap/free work .. sometimes it takes FOREVER to get stuff back lol
1NZYaris1New Zealand · Aug 2, 2009#33Any up date, on this .🤷
TinyGiantThread starterRochester, NH · Aug 3, 2009#34I stopped to talk to the body guy friday and he has been swamped and hadn't had time to play with it. but he said this week he should have time. he plans on smoothing out the surface a bit more before prime and paint. i cant wait to get it back. its going to be sick
advocatelocation · Aug 17, 2009#35we're waiting with you tiny
🙌 for making it work
808_YarisHI · Aug 17, 2009#36glad to see someone working on their car! is it done? 😛
TinyGiantThread starterRochester, NH · Aug 17, 2009#37i know. i hear ya. the guy is doing the work for free so i dont want to bug him about it.
should be done soon though :)
custom LftbackHouston, TX · Aug 17, 2009#38you should open up a "Tiny's C-one replica fixer upper" side business 😆
again, excellent job! 👍
I would be willing to pay you to have this done! now that you have gotten down the "process" and all 😁
47_MasoN_47Northwest Alabama · Aug 17, 2009#39Wow that looks awesome! It definitely takes a lot of patience to work with Bondo...looks like you definitely took your time and the results look great! I'm definitely looking forward to seeing this painted.
TinyGiantThread starterRochester, NH · Oct 12, 2009#40well. the guy hasnt touched the hood. So i'm going to go get it this week and finish it myself. I gotta smooth and sand a bunch still but should turn out nice when i am finished with it
TinyGiantThread starterRochester, NH · Oct 12, 2009#41do you guys think i should paint this sucker black or blue like the car?
1NZYaris1New Zealand · Oct 12, 2009#42black inserts , blue bonnet👍
YAR1SRaleigh, NC · Oct 12, 2009#43wrap it in CF lulz...
kidding, but it would be nice.....
I saw a cf hood the other day on a subie and it looked good from far away but up close far from good... it was all faded yellow :[
TinyGiantThread starterRochester, NH · Oct 13, 2009#44i was thinking of trying to find some blue weave fabric .. it would be awesome to have a blue weave that matches the car. It would make things much easier on making it smooth to just overlay and poly it.
i've never messed with doing overlays. but i'd be up for the challenge :)
CTScottUSA, CT · Oct 13, 2009#45 Originally Posted by
TinyGiant ↑ i was thinking of trying to find some blue weave fabric .. it would be awesome to have a blue weave that matches the car. It would make things much easier on making it smooth to just overlay and poly it.
i've never messed with doing overlays. but i'd be up for the challenge :)
Here's some blue cloth that looks like a decent color match:
http://cgi.ebay.com/Carbon-Fiber-Clo...QQcmdZViewItem TinyGiantThread starterRochester, NH · Oct 22, 2009#46picked up my hood today :)
i have to do some body filler and some sanding to get it silky smooth. the guy is getting the paint mixed up for me so i can paint them up :)
so hopfully in a couple weeks i'll be ready to rock on the paint :) if not sooner!
TinyGiantThread starterRochester, NH · Nov 2, 2009#47i'll be picking up my custom matched cans of paint on saturday :)
the guy is mixing up cans that already have the clear coat in it so i can do a one step and be good to go :) I might still pick up a can of clear just for kicks to to a second coat to seal it .but we should be good to go. I'll be able to do up my side skirts too :)
1NZYaris1New Zealand · Nov 2, 2009#48😆 About time 😆 sorry man just need to wined someone up 👍
justjesusOrange County · Nov 2, 2009#49That blue weave would look good, I think. So yeah. Stay away from the black hood! ;)
(mostly because I'm thinking of a black hood on my Blazing Blue!) LOL
Nah, go for either one.
keep us updated please
TinyGiantThread starterRochester, NH · Nov 9, 2009#50the big unveiling!!! I have to do a TON of polishing on it to get it to sheen.. but right now its kind of an odd near shinny look. i might clay bar it and see if that makes a difference.
anywho.. it looks awesome.
skirts are painted too .. but i dont have the funds for tape today :) maybe tomorrow :)
1 attachment not included in this copy