Yarisworld Archive

A/C vibration from supercharged engine?

17 posts · 6,387 views

MorganOriginal postPCB, FL · Jul 8, 2009#1
Curious is any Blitz owners have noticed a vibration at idle with the a/c on? The car still blows cold air and idles normally, but there is a very noticeable shake transmitted throughout the car

Replies 16

PETERPOOPOahu · Jul 8, 2009#2
lol. Morgan, almost every blitz owner has experienced it. It will idle rough, then smooth out, then circulate again and idle rough (process continued...). Correct? Ofcourse this is all happening while at a idle.

Nobody has figuired it out. But so far, almost all blitz owners are experiecing this.
staypuftchicago · Jul 8, 2009#3
yeah it annoys the hell out of me, the noise is coming from the compressor itself
s3r3nityHull, QC · Jul 8, 2009#4
same here, at idle with a/c on .... quite annoying.. i noticed that with the hood opened, trying to figure out where it comes from, if i tug on the alt upwards the sound goes away it may have something to do with the bracket? will have to test a few things to figure it out..
MorganThread starterPCB, FL · Jul 8, 2009#5
Well although it seems to be a common problem, at least I'm not crazy 😉 thanks guys!

(If its any consolation its coming directly from the a/c compressor, it shakes and then the belt shakes...)
LtNoogieWest Hills, CA · Jul 11, 2009#6
First one to isolate and correct this problem should get rewarded somehow. I don't like the thought of something rumbling like that.
1NZYaris1New Zealand · Jul 11, 2009#7
Remove the S/C , i win 😆
sorry i am just jealous . 🙇 🙇 🙇
MorganThread starterPCB, FL · Jul 11, 2009#8
Originally Posted by LtNoogie ↑
First one to isolate and correct this problem should get rewarded somehow. I don't like the thought of something rumbling like that.
Agreed

I like how I added $3k+ worth of parts and countless hours of install and setup yet it sounds like a cheap piece of crap while idling at a light....
PETERPOOPOahu · Jul 11, 2009#9
lol. i think it's the God reason.
KCALB SIRAYVirginia · Jul 13, 2009#10
Long and I were just talking about this the other day, lol. I'll keep my eat out for this!!
kurokoma-kunmy own little world · Jul 13, 2009#11
Originally Posted by echo_hrs ↑
I don't have this issue..
...The only other thing I can think of, is the ac lines that had to be shifted to accomodate the setup, I used a bracket to help them stay out of the way...
I don't have this issue either. I can hear the compressor working but it doesn't vibrate. I did have a variety of other weird post-install vibrations but these have gone away over time.

My a/c lines are strapped down tightly also, maybe that makes a difference? 🤷
MorganThread starterPCB, FL · Jul 13, 2009#12
haven't tried securing the a/c lines yet, but the noise seems to mostly come from the air conditioning compressor itself? idk, its annoying but turning up the radio works for now
LtNoogieWest Hills, CA · Jul 13, 2009#13
Originally Posted by kurokoma-kun ↑
I don't have this issue either. I can hear the compressor working but it doesn't vibrate. I did have a variety of other weird post-install vibrations but these have gone away over time.
Good, those parts probably finally broke off and fell on the road somewhere.🙂
kurokoma-kunmy own little world · Jul 13, 2009#14
Originally Posted by LtNoogie ↑
Good, those parts probably finally broke off and fell on the road somewhere.🙂
Gaaahhhhh Long, I take it you are referring to the groovy spinner nuts I used to have on my engine cover??? Both them sumbeetches done broked off. Yeah they vibrated for a moment--then clattered down and bam! were gone 😢😢😢
whooppee777Maryland · Jul 18, 2009#15
mine vibrates too and i would do whatever it takes to make it go away
RamezAntigua · Jul 31, 2009#16
hey i'm new to this forum and i'm hear a clickin noise coming from my supercharger only when i idle below 1,000rpm but when i rev it goes away. I never used to have the noise before i fixed the alternator now its fixed its annoying as hell. If i plug it out the noise stops completely!. hope someone can help!
LtNoogieWest Hills, CA · Aug 1, 2009#17
Do you have a Blitz? Are your pulleys all parallel to each other?