Yarisworld Archive

Tein compacts and a few other goodies

18 posts · 6,683 views

arcticvitzOriginal postStudio City, CA · Jul 8, 2009#1
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

I'll get a good shot of the car when I have a chance it was dark before I could snag a photo. A little dampening adjustment and I'll be ready for autocross! Sorry about the flash on the TEIN label, if you're wondering those are fully ride height/dampening adjustable and fully rebuildable! As for the others parts shown above? Cusco rear sway bar, endless NS97 pads and AP Racing front rotors. I figured if AP can make brakes for Formula 1 cars they must be good enough for the Yaris. 😁

BTW all the parts you see on the car were ordered through Glenn at Upgrade Motoring. Great customer service and connections with the very best companies in the business. I cannot recommend him enough!

Replies 17

Kaotic LazagnaCentral Valley, CA · Jul 8, 2009#2
Nice.

How much were the pads? Mine are starting to make the warning grind, so if they're not that much more than "regular" pads, I might as well upgrade.
arcticvitzThread starterStudio City, CA · Jul 8, 2009#3
Originally Posted by Kaotic Lazagna ↑
Nice.

How much were the pads? Mine are starting to make the warning grind, so if they're not that much more than "regular" pads, I might as well upgrade.
The NS97's are nearly 300 bucks for just the front. Much more expensive than "regular pads". If you're interested I have my stock pads and rotors with only 4k miles on them.
Kaotic LazagnaCentral Valley, CA · Jul 8, 2009#4
Originally Posted by arcticvitz ↑
The NS97's are nearly 300 bucks for just the front. Much more expensive than "regular pads". If you're interested I have my stock pads and rotors with only 4k miles on them.
😲 Well, those are racing pads. But yeah, thanks for the offer, but I might just look around and see about those lifetime brake-pads.
aeipee13los angeles · Jul 8, 2009#5
How much were the rotors? i didn't know AP made them for the yaris.
arcticvitzThread starterStudio City, CA · Jul 8, 2009#6
Originally Posted by aeipee13 ↑
How much were the rotors? i didn't AP made them for the yaris.
If you're interested I can get you an exact price through Upgrade Motoring where I picked up mine. All I can say is they aren't extremely expensive but they're the best I could find for the Yaris.
cali yarisCanoga Park, CA · Jul 8, 2009#7
Kaotic, I carry carbotech pads, the 1521 would rock on your car and they are $129.

I haven't seen an R1 Concept rotor fail yet (I've track tested them myself), and I'm betting they are less expensive as well.


Nice upgrades to your car, arctic!!! 👏
(now run some brake ducts 🙂 )
aeipee13los angeles · Jul 8, 2009#8
Originally Posted by arcticvitz ↑
If you're interested I can get you an exact price through Upgrade Motoring where I picked up mine. All I can say is they aren't extremely expensive but they're the best I could find for the Yaris.
If you can get me a quote that would be cool. I've read that R1 rotors where not recommended for the track by R1 themselves. More info on the AP would be nice too.

link to the thread regarding R1 rotors:
SS Brake Line + Brake Pad + Rotor Installed~

I'm not saying R1's are not worthy rotors, I was considering them until I read the thread that started a major "discussion" about people's break setups.
cali yarisCanoga Park, CA · Jul 8, 2009#9
It's a good discussion to have, and I support healthy dialog. I also stand by the products I sell and race my own cars with them. 🙂
aeipee13los angeles · Jul 8, 2009#10
^^

If the price is too high and the specs are nothing special I'm getting the R1 rotors.
Kaotic LazagnaCentral Valley, CA · Jul 9, 2009#11
Originally Posted by cali yaris ↑
Kaotic, I carry carbotech pads, the 1521 would rock on your car and they are $129.
I'll let you know when I need a new pair. How hard is it to replace the pads myself?
arcticvitzThread starterStudio City, CA · Jul 9, 2009#12
Originally Posted by aeipee13 ↑
If you can get me a quote that would be cool. I've read that R1 rotors where not recommended for the track by R1 themselves. More info on the AP would be nice too.

link to the thread regarding R1 rotors:
SS Brake Line + Brake Pad + Rotor Installed~

I'm not saying R1's are not worthy rotors, I was considering them until I read the thread that started a major "discussion" about people's break setups.
I'll check with Glenn over at Upgrade and get you a price quote today on those AP rotors.
arcticvitzThread starterStudio City, CA · Jul 9, 2009#13
Originally Posted by aeipee13 ↑
^^

If the price is too high and the specs are nothing special I'm getting the R1 rotors.
AP rotors are 200 plus tax from Upgrade Motoring 🙂
rningonfumesSoCal · Jul 9, 2009#14
Originally Posted by Kaotic Lazagna ↑
I'll let you know when I need a new pair. How hard is it to replace the pads myself?

Maintenance on disc brakes is very easy compared to the drums. I think there is a DIY floating around too.
Kaotic LazagnaCentral Valley, CA · Jul 9, 2009#15
Originally Posted by rningonfumes ↑
Maintenance on disc brakes is very easy compared to the drums. I think there is a DIY floating around too.
Cool. I'll do a search. Yeah, I was watching someone do some maintenance on our Camry's drums...kinda scary how one of those springs can pop out and kill ya.
Kaotic LazagnaCentral Valley, CA · Jul 9, 2009#16
I found the DIY, but just to be safe, I'd rather have a professional do it. He's actually on the forum, hahaha, but doesn't post much.
AlainMikliSF, CA · Jul 10, 2009#17
Originally Posted by arcticvitz ↑
AP rotors are 200 plus tax from Upgrade Motoring 🙂
does AP has other choice available? like slot or slot + hole?
arcticvitzThread starterStudio City, CA · Jul 11, 2009#18
Originally Posted by cali yaris ↑
Kaotic, I carry carbotech pads, the 1521 would rock on your car and they are $129.

I haven't seen an R1 Concept rotor fail yet (I've track tested them myself), and I'm betting they are less expensive as well.


Nice upgrades to your car, arctic!!! 👏
(now run some brake ducts 🙂 )
Thanks Cali and yes that's the next step! I agree with you that the R1 Concepts are a nice rotor indeed. Now I'm off to the other thread I created since someone felt it necessary to make the claim that drilled rotors were just cheap pieces of crap that disintegrate.