Yarisworld Archive

konig 17x7 v-racing, worth the work?

11 posts · 7,579 views

jonismynameOriginal postadirondacks, ny · Jun 29, 2009#1
was just handed a free to me set of 4 konig v-racing 17x7 wheels, 40mm offset, 4x100... with a junk set of tires. i like the look and layout, but the bad is:

a few small bends. one maybe an inch of the bead is flared out, the other a small bend on the outside of the same form. 3 tires still have pressure from a year ago, the one with the bent bead has lost air. im comfortable smacking the bead back in place. i am familiar with aluminum and am not worried about it.

the surface of 2 wheels is good enough, these have a polished lip that is rather coroded, 15 mins with a scotch-brite didn't do what i hoped it would.

anyone had good results resurfacing alum wheels? i was thinking bead blasting, painting, and clear-coating, then hoping for a good deal on tires?

15lbs seems reasonable for 17" wheels... am i going to regret this performance wise? 205/40/17 is what the previous owner used on a saturn, the sizing seems approriate for the yaris? or are 45 series more correct?

im open to opinions, many say not to bend aluminum wheels, but for free, i'll smack it with a hammer and a chunck of wood... it's not load bearing, and i don't expect to remove a chunk of the wheel doing this...

Replies 10

supmetSouthern California · Jun 29, 2009#2
Originally Posted by jonismyname ↑
15lbs seems reasonable for 17" wheels..
Are you sure they only weigh 15 lbs? I'd bet they are closer to 17 or 18(or more).
jonismynameThread starteradirondacks, ny · Jun 29, 2009#3
stamped on the wheel is via 690kg

i assumed 690 is 6.9kg=15.22lbs.

i expect you're right, that was wishful thinking...
whats the 690kg then?
CASTREXCosta Rica · Jun 29, 2009#5
690 kg is the max weight they can support per corner...

they are probabbly close to 20lbs each
PETERPOOPOahu · Jun 29, 2009#6
20lbs! yikes
cali yarisCanoga Park, CA · Jun 29, 2009#7
690 is... well, 690. x 2.2 = 1518 pounds. Castrex is correct on this one, I think.
Kaotic LazagnaCentral Valley, CA · Jun 30, 2009#8
Imo, fixing the rims will cost about the same, if not more than a new set.
jonismynameThread starteradirondacks, ny · Jun 30, 2009#9
well i was afraid of that. the car is pokey as it is. cost would be considerably less than buying new... i work in automotive industry and have access to a bead blaster, and a powdercoat oven, and employee priced wheel paint rattle cans. the weight is the only thing that scares me, unfortunately i guess i'll "go fish". thanks guys!
baked_limabeansLouisiana · Jun 30, 2009#10
16x7 v-racing are 18 lbs

so the 17s will be heavier
33OHDover, Ohio · Jun 30, 2009#11
I'd say try to sell them on Craigslist for $100 OBO and see what happens.

I wouldn't have them fixed or put them on a Yaris, those are some heavy wheels.