schleppyOriginal postBoston, MA · Jun 26, 2009#1Tomorrow morning I'm installing TRD springs and Tokico blues into my 09 hatch. Will I need to trim the bump stops at all? The Toyota TRD spring install document doesn't mention it, and based on my searching it seems people are saying you don't have to.
I only want to remove the suspension once, so I'd like to get it right the first time.
Thanks all!
-Sean
Keywords: TRD Springs, bump stop, tokcio blue, bumpstop
Replies 7
TamagoOff Grid · Jun 26, 2009#2trim off 1/2" you should be fine
schleppyThread starterBoston, MA · Jun 26, 2009#3Off the top or the bottom? I'm assuming bottom.
TamagoOff Grid · Jun 26, 2009#4 Originally Posted by
schleppy ↑ Off the top or the bottom? I'm assuming bottom.
really shouldn't matter but bottom would probably be easier.
The one PRBayamon PR · Jul 9, 2009#5Iam put the trd´s and no need to trim
TreyzLong Island, NY · Jul 10, 2009#6TRD's (1.25" drop) are not to be trimmed. There's nothing in the intructions to do it. They do say the same about the Tein S-Techs (1.4" drop), but I looked at their instructions and it comes as a class "A" to cut them.
I had cut mine because I originally had DF210's on my first Yaris, but then switched to the TRD's (DF210's were too low for me and not as stiff as the TRD's). I still rubbed on dips and such. My new Yaris, I left the bumpstops uncut and it feels better. Not rubbing/meling the splashguard anymore.
MUSKOKA800Chatham, Ontario, Canada · Jul 10, 2009#7There is no mention of butchering anything in the TRD instructions.
TamagoOff Grid · Jul 10, 2009#8there is no mention of "butchering" anything in this thread to begin with. 🙄