Yarisworld Archive

Ultra Racing Fender Braces...

19 posts · 8,136 views

TamagoOriginal postOff Grid · Jun 24, 2009#1
Picture not included in this copy

http://shop.microimageonline.com/pro...&productId=136

anyone here purchase these? i've seen these a lot on evos etc and wondered how well they work.. if they have benefits i'm considering taking the time to build some for the pandamobile

anyone?

Replies 18

JeemeeCentral Arkansas · Jun 24, 2009#3
Yeah, it looks like it just strengthens up your subframe the by the fenders. Prolly not worth the weight IMO.
largeorangefontSo Cal, OC · Jun 25, 2009#4
Those are about the ONLY braces that will be worth the weight. I'm considering getting these. These should make turn in more consistent. Much better than a front strut brace.

The front framerails are generally one of the weakest areas of the unibody. These do help in WRXs and EVOs which have a lot of weight over the front wheels as well.
ROCKLAND TOYOTAROCKLAND COUNTY NY · Jun 25, 2009#5
guy who installed bars had stated that this mod made his fenders mis-aligned. not sure if he replied back as to a fix but then again im too lazy to click link and check. if fenders didn't have to come off id be interested in this as well.....
kngrsllSpartanburg, SC · Jun 25, 2009#6
Originally Posted by largeorangefont ↑
Those are about the ONLY braces that will be worth the weight. I'm considering getting these. These should make turn in more consistent. Much better than a front strut brace.

The front framerails are generally one of the weakest areas of the unibody.
These do help in WRXs and EVOs which have a lot of weight over the front wheels as well.
interesting...

on a side note, another common Evo/WRX part i would love to have is the offset antilift/lower a arm bushings.
TamagoThread starterOff Grid · Jun 25, 2009#7
Originally Posted by kngrsll ↑
interesting...

on a side note, another common Evo/WRX part i would love to have is the offset antilift/lower a arm bushings.
i used to have a common STI part :D

Picture not included in this copy
cali yarisCanoga Park, CA · Jun 25, 2009#8
Tamago, did you sell your kit?
cali yarisCanoga Park, CA · Jun 25, 2009#9
when I'm done drag racing and move to road/auto x setup, I'll be putting the fender braces on.
TamagoThread starterOff Grid · Jun 25, 2009#10
Originally Posted by cali yaris ↑
Tamago, did you sell your kit?
yup
cali yarisCanoga Park, CA · Jun 25, 2009#11
well c'mon now... who bought it? Yaris? xA? '66 Nova?
TamagoThread starterOff Grid · Jun 26, 2009#12
Originally Posted by cali yaris ↑
well c'mon now... who bought it? Yaris? xA? '66 Nova?
local echo
largeorangefontSo Cal, OC · Jun 26, 2009#13
Originally Posted by kngrsll ↑
interesting...

on a side note, another common Evo/WRX part i would love to have is the offset antilift/lower a arm bushings.
The upgraded bushings are good but you dont want less front caster.
kngrsllSpartanburg, SC · Jun 26, 2009#14
Originally Posted by largeorangefont ↑
The upgraded bushings are good but you dont want less front caster.
the bushings i saw on perrin increased front caster by offsetting the hole. no effect on camber though.
AlainMikliSF, CA · Jun 27, 2009#15
I bought it, but don't have a chance to put it on yet🙁

it takes a long time to remove the fender🙁🙁
botchilahPhilippines · Jun 27, 2009#16
I put the fender braces on. Honestly I cannot say if these made any improvement on their own since I installed almost everything at the same time. The fender braces though aren't too heavy, must be like 3kg each. I haven't gotten around to re-aligning the doors (not the fenders) so they shut easily enough as it takes a whole lot of time to do it. Best way is to open-close the doors once they are installed, but prior to putting back on the front fenders (which are really light by the way!)

In case anyone's interested, I also got the Penguin Garage hub spacers and my rear wheels seem to have stopped rubbing wherever they were rubbing. Simple stuff, but well made. Kudos to the guys there!

Stupid me forgot to buy the NST pulley kit when my friend was there (doh!)

Back to UR braces, you should get them ALL! It's well worth the price, nowhere near CUSCO. AFAIK 2-3 CUSCO braces would pay for almost ALL the UR braces lol
largeorangefontSo Cal, OC · Jun 29, 2009#17
Originally Posted by kngrsll ↑
the bushings i saw on perrin increased front caster by offsetting the hole. no effect on camber though.
The wrx front arms are quite a bit different. I've installed a few of those anti lift kits on Subarus.
kngrsllSpartanburg, SC · Jun 29, 2009#18
Originally Posted by largeorangefont ↑
The wrx front arms are quite a bit different. I've installed a few of those anti lift kits on Subarus.
oh i see... i was talking about this part: http://www.perrinperformance.com/pro...gory=8&model=3

i assume the subaru ones were similar. but anyways...