I remember seeing an oem exhaust tip accessory for the yaris at some point and i'm looking to buy one. Does anyone know where i can get one? I'm finding the nitto exhaust a little too loud for my taste, and i want to go back to the OEM muffler but with a nice shiny tip to flow nicely with the TRD rear lip. The car is a sedan if that makes a difference. Any suggestions?
OEM Exhaust Tip Accessory
37 posts · 16,303 views
Replies 36
Those things can be found on eBay, but they're almost 30 bucks! Just save up a bit more, and revert back to a custom axle-back.
well, to be honest i'm regretting putting the exhaust on there. not that there's anything wrong with it; its surprisingly deep for a 1.5L. Just the yaris doesn't have enough sound deadening and if i want loud i'll drive my IS300. I want to get this thing quiet again for road trips. Maybe i could just add an extra resonator to it? I might try that first.
That tip has perforations and packing inside, and reduces the noise slightly. I've got a 2007 S sedan wtihout the tip, and two 2009s with it, and the 2009s are quieter. Could also have differences inside the muffler from one year to another, of course.
how much after shipping?Originally Posted by ROCKLAND TOYOTA ↑
^ that sounds good. I would like for it to be within 1dB of stock at idle, and within 2dB at WOT. This is a complete estimation, but my IS300 is probably within 1dB of stock at idle, and probably like 3dB at WOT. I bought all the quietest aftermarket exhaust stuff for my IS300, but there isn't too many options for the yaris.
I just installed the nitto midpipe along with the nitto axleback this morning. it's pretty quiet , but it maybe louder in a couple weeks ...
if you need the midpipe, I believe Garm have one left in stock ...hurry 😁 or you can contact alainmikli for the custom one.
if you need the midpipe, I believe Garm have one left in stock ...hurry 😁 or you can contact alainmikli for the custom one.
this weekend i'm putting the TRDv4 on. next weekend i'm going to try putting a resonator into the nitto axle-back and see if that makes it quiet enough. if that doesn't make it quiet enough, i'm going to put on the OEM muffler and i wonder if there's a way i can fit a tip like this one it? http://cgi.ebay.com/ebaymotors/Unive...1%7C240%3A1318
Picture not included in this copy
Picture not included in this copy
The ricer in me gets the best of me sometimes. regardless, that tip would be the perfect diameter for the cut-out on the trd rear valence.
Picture not included in this copy
Picture not included in this copy
The ricer in me gets the best of me sometimes. regardless, that tip would be the perfect diameter for the cut-out on the trd rear valence.
Originally Posted by vten ↑I just installed the nitto midpipe along with the nitto axleback this morning. it's pretty quiet , but it maybe louder in a couple weeks ...
if you need the midpipe, I believe Garm have one left in stock ...hurry 😁 or you can contact alainmikli for the custom one.
the nitto midpipe actually makes it quieter than stock. I know becuase i had one, over a year ago. it actually makes this little 1.5L sound so deep. i dont think you could make this little motor sound any better. kinda smelly running catless, but not as bad as my IS300. the only problem is the first resonator will fail you shortly and start rattling because the head coming out of the motor melts the glass material packed around the first resonator. Also the second resonator causes the car to idle rough for some reason when you're in drive (automatics only) and waiting at the lights with the brakes depressed. I ended up having to put the factory exhaust piping back in. I will use one of the resonators and weld it into the axle back though to quiet that up.
Walmart, Stainless Steel, $12-$14 Had mine for over a year $ it still looks good, saw one there last weekend. your call
1 attachment not included in this copy
You finally got the trd v4 kit from garm? Also, lookin forward to pics.Originally Posted by Split ↑this weekend i'm putting the TRDv4 on. next weekend i'm going to try putting a resonator into the nitto axle-back and see if that makes it quiet enough. if that doesn't make it quiet enough, i'm going to put on the OEM muffler and i wonder if there's a way i can fit a tip like this one it?
The ricer in me gets the best of me sometimes. regardless, that tip would be the perfect diameter for the cut-out on the trd rear valence.
I've got the smaller, square w/ rounded edges version of the one from Wal-Mart. Looks nice w/o looking too ricey.
Got it at PepBoys for around the same price as the Wal-Mart version.
Picture not included in this copy
Got it at PepBoys for around the same price as the Wal-Mart version.
Picture not included in this copy
OK... I must go to WalMart this weekend. 🙂Originally Posted by Bob Dog ↑Walmart, Stainless Steel, $12-$14 Had mine for over a year $ it still looks good, saw one there last weekend. your call
That's exactly what i was looking for. If adding this resonator isn't quiet enough I'll message you. I'm assuming its the same accessory for the sedan and the hatchback, right? I hope it lines up with the TRD rear valence .Originally Posted by echo_hrs ↑I've got the tip Toyota Canada had as an accessory for the Yaris back in 2005...it's still attached to my stock muffler in a box from when it was removed from my Yaris with no kms on it...
Picture not included in this copy
If you end up going the stock route, hit me up and i'll dig it out...
Cheers
Originally Posted by Pitt Yaris ↑You finally got the trd v4 kit from garm? Also, lookin forward to pics.
its being put on this saturday. i'll take pictures when its done. there's pictures somewhere on this forum of the car with the TRDv2 or whatever is on there now.
Yep, got that one as well and it not only looks good but is holding up nicely as well...Originally Posted by Bob Dog ↑Walmart, Stainless Steel, $12-$14 Had mine for over a year $ it still looks good, saw one there last weekend. your call
Picture not included in this copy
Cheers! M2
Save your pennies and get the catback from TRD. I have it and it's just right. I also added PhatMat in the rear to quiet things down.
Those muffler tips are kinda bling and nothing more. 😕
PS; I had one of those tips on my old Prelude. It came off on the highway and a guy on a bike had to swerve around it. Could've been a real mess otherwise......
Those muffler tips are kinda bling and nothing more. 😕
PS; I had one of those tips on my old Prelude. It came off on the highway and a guy on a bike had to swerve around it. Could've been a real mess otherwise......
i'm assuing the TRD exhaust will be louder than stock, and posssibly louder than the nitto with an extra resonator.
Niiice. Give me a good idea how it looks on a flint mica sedan.Originally Posted by Split ↑its being put on this saturday. i'll take pictures when its done. there's pictures somewhere on this forum of the car with the TRDv2 or whatever is on there now.
If you want a real quiet aftermarket check out the Tanabe Medallion touring. I can't even hear it when I am cruising on the freeway and it only really makes its presence known @ WOT
Sure it's louder than stock, that's part of the "appeal" of the whole thing.Originally Posted by Split ↑i'm assuing the TRD exhaust will be louder than stock, and posssibly louder than the nitto with an extra resonator.
I know the TRD's street legal and under 93db loud.
I've never heard the Nitto. I did'nt like the Medallion since the muffler "can" hangs down vertically and it looks kinda weird IMHO.
The TRD looks like a traditional oval muffler and is bright polished with a REAL welded on exhaust tip with a rounded edge.
i never wanted it to be louder than stock.. just the nitto's tip fit absolutely perfectly into the TRD rear valence. Plus it was the cheaper of the 2 available exhausts for the Sedan.
Anyway, i put on the TRDv4 sedan kit and here's what it looks like:
Picture not included in this copy
Anyway, i put on the TRDv4 sedan kit and here's what it looks like:
Picture not included in this copy
Looks good. Got any more pics of the kit?
x2. Would really like to see some more pics from different angles. I'm really debating buying this kit. Did you get this kit from garm or someone else? Roughly, how much did the paint job cost you? And how hard was fitment?Originally Posted by Brian ↑Looks good. Got any more pics of the kit?
More pics! Also, why did you go from the v2 to the v4?
His V2 was too low for him, and I believed it started chipping/cracking, so he wanted a new lip. Right, split?Originally Posted by Pitt Yaris ↑More pics! Also, why did you go from the v2 to the v4?
Good reason. Looking forward to more pics. This kit, coupled with nf210s would make for a much better looking yaris. I would have to wait to get wheels til next summer though :/.Originally Posted by Kaotic Lazagna ↑His V2 was too low for him, and I believed it started chipping/cracking, so he wanted a new lip. Right, split?
v2 started falling apart. the front lip from snow, and the sideskirts just own their own! i still have the rear lip from the v2 on the car, and i have the v4 rear lip on hand incase something happens to it.Originally Posted by Kaotic Lazagna ↑His V2 was too low for him, and I believed it started chipping/cracking, so he wanted a new lip. Right, split?
I'lll take more pictures of this kitted out car when I have a chance. I'm in the middle of buying a house right now and i'm pretty busy. next time i have a chance to give it a proper wash and its sunny out i'll snap some pics.
I received my OEM dual tip today from Thailand. Toyota part number: PZ056-0D002 (Muffler, Cutter - Sporty). I paid $32 + $14 for shipping.
Top view:
Picture not included in this copy
Pipe end (It's made so that the flare on the OEM muffler fits between the saddle and the split):
Picture not included in this copy
On my Yaris:
Picture not included in this copy
Picture not included in this copy
Top view:
Picture not included in this copy
Pipe end (It's made so that the flare on the OEM muffler fits between the saddle and the split):
Picture not included in this copy
On my Yaris:
Picture not included in this copy
Picture not included in this copy
Wow, that's quite impressive.👍
It looks "real"!
Good pick...
It looks "real"!
Good pick...
CTScott, got a link to where you got it? Thanks.
I have my muffler, is made in stainless steel
the cost is around the 40 dlls
the cost is around the 40 dlls
1 attachment not included in this copy
Check out this guy's eBay store. He doesn't have the double listed at the moment (just a wide oval one for the Yaris), but if you shoot him a PM he'll post up a buy-it-now for you.Originally Posted by IsLNdbOi ↑CTScott, got a link to where you got it? Thanks.
http://shop.ebay.com/merchant/multim...fromZQQ_ipgZ25
Mine looks just like MadMax's for $7.99 at Pep Boys. Coolness!!👍
Dang, that's $5 less than WalMart! Well done! 👍Originally Posted by NJBob ↑Mine looks just like MadMax's for $7.99 at Pep Boys. Coolness!!👍