Yarisworld Archive

Front Camber Bolts

4 posts · 3,981 views

lilredrocketOriginal postDFW, Texas · Jun 23, 2009#1
Hi, I was wonder what degree of adjustment everyone was getting out of there camber bolts. I got -2.8 with mine and talked to another local member and he only got -1.4 with his. I got mine through work (goodyear ordered through a warehouse) and he got his through garm. I got to do my own alignment the other member had to pay extra because he asked for a (custom) alignment. Any thoughts?

Replies 3

TamagoOff Grid · Jun 23, 2009#2
i've seen -2 from a set of bolts. are you on 14mm or 15mm camber bolts?

"how" you do your alignment affects how much you can get out of a set of bolts. most techs simply turn the bolt in place. if you rest the weight of the car ON the front wheels, remove the locking pins on the bearing plates on the rack and allow the front to "sag" you'll get a LOT more than simply turning the bolt head.

we have a local autocrosser who actually straps the top of his tires and pulls them inward to get as much camber as possible wiht stock bolts (he was in a stock class). there really is a lot of play in most stock bushings.
lilredrocketThread starterDFW, Texas · Jun 23, 2009#3
Yea the car was sitting on the plates unpinned and I turned the bolt to get the -2.8 and the are 15 mm bolt to.
kngrsllSpartanburg, SC · Jun 23, 2009#4
Originally Posted by Tamago ↑
we have a local autocrosser who actually straps the top of his tires and pulls them inward to get as much camber as possible wiht stock bolts (he was in a stock class). there really is a lot of play in most stock bushings.
cool trick