Yarisworld Archive

The Official "Bambo the Yarisworld Traveler" Thread (V3)

562 posts · 169,672 views · page 12 of 12

Replies continued

tomatoSan Francisco Bay Area · Nov 29, 2009#551
I thought maybe we could sort out Bamboo's clothes in this thread, before we lock it,
so we can leave the other one open for more pictures, comments, or whatever.

Here goes, big news: Bamboo has finally found something to wear 👏👍👍👍 See for yourself!!

Bamboo will now measure the garment so we can have a meaningful discussion about logos and stuff.

(BTW, don't worry about the bear next to Bamboo, that's Tomato's buddy.)

8 attachments not included in this copy

TinyGiantRochester, NH · Nov 29, 2009#552
if the hoodie is at least 50% cotton i can screen print on it :)
TinyGiantRochester, NH · Nov 29, 2009#553
Picture not included in this copy

i actually could get this on there i would just do it in white :) without the black box
tomatoSan Francisco Bay Area · Nov 29, 2009#554
I was hoping you'd say something like that TG, thanks! 👍

In fact, I was waiting for Darb to get back so I can shamelessly steal his signature and use it for the panda's jacket 🙂

JBougie has offered to try to embroider the jacket so maybe we should let her have a shot at it first (that's why I posted all the photos with the measurements, so she can give detailed information to her lady who does the embroidery).

Embroidery people usually like to work with a flat piece of fabric, so she may not be able to get anywhere with that little hoodie.

If that doesn't work, then maybe you TG could heat-print something?
I do'nt know the garment content, though, it's not written on it or anywhere on the wrapping. 🙄

I'm guessing it's a polyester mix, and would work well with something like this:

http://www.avery.ca/vgnfiles/OP/en_u...-shirtfull.pdf

(you have to get the one for dark colors, though).

I would have done it myself but right now, between the panda, the shipping fees, the hoodie.. I've spent close to $25 already and I still haven't mailed out the panda to the next guy. The Avery templates cost around $17 + tax or so at the local office depot (yes, the cost of living is insane out here :sigh:)

If you guys are unable to do the logo, then I'll do it, but I might have to start collecting a few bucks, then, because I don't want to spend much more than $25 on the project.

Thoughts anyone?
tomatoSan Francisco Bay Area · Nov 29, 2009#555
Originally Posted by TinyGiant ↑
Picture not included in this copy

i actually could get this on there i would just do it in white :) without the black box
It would work as is because the letters and the panda would stand out just fine.

If I had 15 dollars more to spend on the project, that's exactly what I would have done, put that box as is on the back of the hoodie.
TinyGiantRochester, NH · Nov 29, 2009#556
i have a heat transfer press :)

but all i need is an additive for the ink to stick to non cotton. i could score some from the shop down the street if need be :)

the jacket should be able to fit on the head of an embroidery machine.
TinyGiantRochester, NH · Nov 29, 2009#557
well get it over here and i'll do it up :) no sweat :)

i'll also print it onto a patch of material .. or a couple just in case it doesnt hold up we can always just sew a patch on the back that has been screen printed. but i'll get it perfect. no worries :)
tomatoSan Francisco Bay Area · Nov 29, 2009#558
Originally Posted by TinyGiant ↑
i have a heat transfer press :)

but all i need is an additive for the ink to stick to non cotton. i could score some from the shop down the street if need be :)

the jacket should be able to fit on the head of an embroidery machine.
I agree. I think they're just being lazy.
tomatoSan Francisco Bay Area · Nov 30, 2009#559
Originally Posted by TinyGiant ↑
well get it over here and i'll do it up :) no sweat :)

i'll also print it onto a patch of material .. or a couple just in case it doesnt hold up we can always just sew a patch on the back that has been screen printed. but i'll get it perfect. no worries :)
Sounds like the perfect plan to me.👍👍👏
Thanks!

Let's give JBougie 's embroidery a shot first, since she's already offered weeks ago. If for any reason, she can't get the embroidery job done, then she'll mail Bamboo and the jacket to Tiny Giant, then go down the list? Does that sound like a plan?

JBougie, you need to PM me your address when you get a chance! :)

BTW TG, I have an idea about another project that might be kind of cool, will PM you in a few.
tomatoSan Francisco Bay Area · Dec 1, 2009#560
OK, I PM'd JBougie as well, but if she doesn't respond within the next day or so, Bamboo will go to Tiny Giant, who, I'm sure can do an awesome print job on Bamboo's hoodie.

Bamboo had a lot of fun in San Francisco, but he's ready to move on! 😁
DarbThread starterPittsburgh, PA · Dec 2, 2009#561
Can we lock this thread, please?
tomatoSan Francisco Bay Area · Dec 3, 2009#562
you're the boss