ceilyOriginal postPhoenix · Jun 19, 2009#1Hi everyone,
I'm going to pick up my 2009 Yaris today and I'm so excited! I was wondering if anyone has found an aftermarket drink holder that works well.
Any input would be appreciated. Thanks!
Update: I picked up my Yaris yesterday and found that the cup holders near the AC vents worked really well. Bonus, the AC will keep my drinks nice and cold with the 115 degree heat in Phoenix. Thanks to those who replied with suggestions. I was concerned about the functionality.
Replies 24
CompanyXPaladinSoCal · Jun 19, 2009#2You need an aftermarket drink holder to go with the seven already in the car? How many drinks are you drinking at once? 😁
IllusionXBrossard, QC · Jun 19, 2009#3the 5 doors has 2 extra bottle holder on the rear doors too!
stoufferUK · Jun 19, 2009#4The drink holder by the steering wheel is great for keeping your drinks cool. Open the vent so the air hits the bottle/can, set the circulation to the air vents and put the A/C on, voila Cold drink!
Picture not included in this copy
🎉
jambo101Montreal Canada · Jun 19, 2009#5 Originally Posted by
stouffer ↑ The drink holder by the steering wheel is great for keeping your drinks cool.
Its also a great place to have your drink spill on your knee if its too full,
uncapped drinks are definitely out of the question.
kimonaHuntington Bch, CA · Jun 19, 2009#6 Originally Posted by
ceily ↑ Hi everyone,
I'm going to pick up my 2009 Yaris today and I'm so excited! I was wondering if anyone has found an aftermarket drink holder that works well.
Any input would be appreciated. Thanks!
You've got to be kidding!
stoufferUK · Jun 19, 2009#7I tend only to have bottled water in there 👍
Yaris HiltonBristol, Tennessee, USA · Jun 19, 2009#8So cap your drinks. No aftermarket drink holder's going to fix that.
supmetSouthern California · Jun 19, 2009#9 Originally Posted by
Yaris Hilton ↑ So cap your drinks. No aftermarket drink holder's going to fix that.
🤣 I was thinking the same thing.
What are you people drinking out of? Full 5 gallon buckets without lids?
tuckevalastinDelaware/Connecticut · Jun 19, 2009#10 Originally Posted by
jambo101 ↑ Its also a great place to have your drink spill on your knee if its too full,
uncapped drinks are definitely out of the question.
And a great place to turn your cold beverage nice and hot if used when the heat is on.
SailDesign. · Jun 19, 2009#11 Originally Posted by
tuckevalastin ↑ And a great place to turn your cold beverage nice and hot if used when the heat is on.
FFS, guys - buy a frikkin' portable kitchen for the back seat so you can make your donuts while you drive as well. :sarcasm:
If you don't want your drink to get hot in the holder, then close that vent off pro tem. It ain't rocket science... 😁
cali yarisCanoga Park, CA · Jun 19, 2009#12no thanks on the donuts, but a latte machine would work. With an IV drip, even better. 😉
GooseOhio cornfields · Jun 19, 2009#13If I may interrupt the thread to provide an answer to the OP's question, here's a drink holder that has worked well for me. It's fairly stable and contains minor spills. I just set it on the floor of the passenger footwell. Hope this helps... 🙂
http://www.drillspot.com/products/42...s_Drink_Holder gokartrideTexas · Jun 19, 2009#14 Originally Posted by
CompanyXPaladin ↑ You need an aftermarket drink holder to go with the seven already in the car?
True....there is what I would call a super-abundance of cup holders!!! One of them has got to work for you!!!
CompanyXPaladinSoCal · Jun 19, 2009#15 Originally Posted by
Goose ↑ If I may interrupt the thread to provide an answer to the OP's question, here's a drink holder that has worked well for me. It's fairly stable and contains minor spills. I just set it on the floor of the passenger footwell. Hope this helps... 🙂
Woah, hang on a second, we don't actually want to
answer someone's question... 😆
Ceily, welcome to YW!
twowheelsCA · Jun 19, 2009#16I have considered making an insert for my dash drink holder for my coffee mug as when it's full it sometimes tips back when I accelerate and spills a little bit, even w/ the lid. Making an insert that the base of the mug fits into that prevents it from moving around would make that holder absolutely perfect.
As for its position, it's AWESOME! Far better than the center console cup holders that are in your way while shifting or just resting your arm!!
yaris-meAnaheim, CA · Jun 19, 2009#17The tall slender commuter mugs works for me. I had to give up my wide stainless steel mug with the heavy rubberized handle.🙁 I've gotten use to the slender 20 oz. without handle.😉
tomatoSan Francisco Bay Area · Jun 20, 2009#18 Originally Posted by
Goose ↑ If I may interrupt the thread to provide an answer to the OP's question, here's a drink holder that has worked well for me. It's fairly stable and contains minor spills. I just set it on the floor of the passenger footwell. Hope this helps... 🙂
http://www.drillspot.com/products/42...s_Drink_Holder
Looks like a good one. But you know, no matter what you buy, if you really hit the brakes ... 🤷 the mug or whatever you use better have some kind of self-sealing lid, no matter where you put it.
CDavis7MSan Diego · Jun 20, 2009#19Why would you want to use a stock anything?
jambo101Montreal Canada · Jun 20, 2009#20 Originally Posted by
Yaris Hilton ↑ So cap your drinks. No aftermarket drink holder's going to fix that.
the drinks are capped but if the drink is too full it will come out of the hole in the lid. Odd that i seem to be the only one with this problem😕nobody drinks coffee out there and had the coffee spill when opening the plastic lid?🤷 Welcome to the club Ceily
ForrestNY · Jun 20, 2009#21 Originally Posted by
ceily ↑ Hi everyone,
I'm going to pick up my 2009 Yaris today and I'm so excited! I was wondering if anyone has found an aftermarket drink holder that works well.
Any input would be appreciated. Thanks!
👏👏🙇🙇👏👏🙇🙇
Not to offend 'ceily' but sometimes you have to wonder about some of the questions...ya just cant make them up !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I guess you did not have an opportunity to truly explore this little car so when you pick it up, enjoy you new car.
Ceily, you will find that this little car has many wonderful traits and one of them is the number of built in cup holders, whether they work for you or not, you will discover soon enough.
ceilyThread starterPhoenix · Jun 20, 2009#22Thanks for the suggestion.
CtrlAltDefeatIndianapolis IN · Jun 21, 2009#23 Originally Posted by
jambo101 ↑ the drinks are capped but if the drink is too full it will come out of the hole in the lid. Odd that i seem to be the only one with this problem😕nobody drinks coffee out there and had the coffee spill when opening the plastic lid?🤷 Welcome to the club Ceily
My far left drink holder regularly has coffee dried in/on it.
Acceleration happy MT Yaris + full coffee = coffee shooting straight up out of the holes in the lid + loud cussing. I learned my lesson: drink it down an inch before taking off 😆 I've also had the bladder buster 44oz. cups try to tip over and fall out, so i use the one in the center for those...
GooseOhio cornfields · Jun 21, 2009#24I saw a suggestion on another car forum that made me think, "why didn't I think of that":
A roll of duct tape.
When you think about it, the idea makes sense. As long as the inner diameter of the roll works, the "cupholder" won't slide (at least on the floormat). Just passing the idea along...
businezguyPennsylvania · Jun 21, 2009#25I'm a huge coffee drinker, especially on my commute to work. Since I use a coffee cup that has a handy dandy closing top, I expect the cup holder in the Yaris will be perfect for me. We'll see tomorrow. I can't wait for my first commute (I don't exactly say that too often although I find the commute to be relaxing).