Yarisworld Archive

FS: Brembo calipers

19 posts · 8,283 views

mrbondOriginal postIllinois · Jun 18, 2009#1
Up for sale is a pair of Brembo calipers from a 2007 Mitsubishi Evolution. Unexpected medical expenses are forcing me to sell these. If any of you have been paying attention to the progress of the makeshift big brake kit, you'll see that these are the Brembos I was talking about. Vten doesn't seem to want them, so I'm selling these to whoever wants to make a BBK with Brembo calipers. These require 320mm rotors, the exact same size of the rotors Garm sells on microimage.com. Brand new, the pair is a little over a grand. Since these need powdercoating, new spring clips, and new dust boots, I'm selling these for $250 shipped obo. Thanks for looking!
Picture not included in this copy

Replies 18

id3379Jun 18, 2009#2
bump for good brakes, love them on my STi
vtencolumbus · Jun 18, 2009#3
sorry to hear what happened Kirk,

I just don't have access to rebuild the caliper ...so Im worry not going to use em.

hope everything works for you....

sorry again,
Tan
AlainMikliSF, CA · Jun 18, 2009#4
I want to get them, however I can't use them since I'm running on my 16" rims🙁

bump😉
mrbondThread starterIllinois · Jun 19, 2009#5
Originally Posted by vten ↑
sorry to hear what happened Kirk,

I just don't have access to rebuild the caliper ...so Im worry not going to use em.

hope everything works for you....

sorry again,
Tan
You know, I was researching my ass off how to rebuild these, and it's actually stupid simple. I have links to very detailed photo DIYs from Evo owners rebuilding these exact same calipers. If you want I could direct you to those links, as well as the links to where to find these required parts. All the research is done, you just need to act upon them :P
JerkrattFair Lawn, NJ · Jun 20, 2009#6
who is making these?
mrbondThread starterIllinois · Jun 21, 2009#7
^ who's making what? The kit, the replacement parts, or the calipers? The kit you can make yourself, the parts are made by Girodisc and Brembo, and the calipers are made by Brembo.
cruz-gsrAshland Mass · Jun 21, 2009#8
im interested but i need more info like how is making the braket and how much and also how do i get the parts to fix the brembo calipers.
JerkrattFair Lawn, NJ · Jun 22, 2009#9
how to make them
mrbondThread starterIllinois · Jun 22, 2009#10
cruz-gsr, shoot me a pm and I'll let you know everything you need to know 👍
mrbondThread starterIllinois · Jun 22, 2009#11
bump
AlainMikliSF, CA · Jun 23, 2009#12
Originally Posted by mrbond ↑
cruz-gsr, shoot me a pm and I'll let you know everything you need to know 👍
Why not post them here? Let everyone how to rebuild them. 🎉
mrbondThread starterIllinois · Jun 24, 2009#13
^ good idea!
Well, for the parts, the replacement dust boots and/or piston seals can be found at www.girodisc.com and the springs and clips can be found at http://www.turbowholesale.com/_searc...age=1&q=Brembo under "front springs and clips" about a quarter of the page down. After everything's said and done, these'll still be cheaper than new calipers by a good deal.
cali yarisCanoga Park, CA · Jun 24, 2009#14
need to know, and this is critical, what WIDTH rotor those calipers are made for.
mrbondThread starterIllinois · Jun 24, 2009#15
These calipers are designed for a rotor 30mm thick.
vtencolumbus · Jun 24, 2009#16
the oversize rotors from Garm is 21.86mm thick if it helps.
cali yarisCanoga Park, CA · Jun 24, 2009#17
I think they would require custom rotors then, but i'm not 100% positive about that (not a brake tech).
9vaporsNY · Jul 12, 2009#18
Are these the same as the subaru brembos?
mrbondThread starterIllinois · Jul 14, 2009#19
Not really. The STI Brembo calipers have a cotter pin setup to keep the pads in. These require pressure pins. Other than that, same design.