Yarisworld Archive

Greddy Turbo Kit

18 posts · 6,885 views

GiupoOriginal postItaly · Jun 14, 2009#1
I sale the greddy turbo kit with only 4000 km, because i want to buy the Garrett GT2554R because I have installed piston, rods and header polished and the greddy turbo is very small for my engine.

price : €1500 ($2000)

Replies 17

AlexNet0Rockland, ME · Jun 14, 2009#2
pictures? more details on the setup? link?
GiupoThread starterItaly · Jun 14, 2009#3
the kit include :

Turbo with actuator at 0,5 bar
exaust manifold
downpipe
oil pan alluminium
gaskets
alluminium pipes
BMC Air filter
silicon hose
popoff valve
oil pressure hose and more

The set up is 0,5 bar
AothachosLong Island, NY · Jun 14, 2009#4
need pictures please =)
anubisx99Natick, MA · Jun 14, 2009#5
cali yarisCanoga Park, CA · Jun 14, 2009#6
So if you had this installed on a Yaris there are some custom-fabricated parts, yes?

Post Pictures, that's all I can say!
cali yarisCanoga Park, CA · Jun 14, 2009#8
^ doesn't answer my question, which I'm sure anyone considering the purchase would want to know.
GiupoThread starterItaly · Jun 14, 2009#9
ok, I installed this kit with oem engine for 3000 km at 7 psi with 100 octane fuel but after I have installed piston with low compression , rods, header polished and cams and I have run for 1000 km at 16 psi but this turbo is very small for my project.. the turbo is in optimal condition
GiupoThread starterItaly · Jun 14, 2009#10
sorry but the greddy kits fitted in yaris 1nzfe and 2nzfe
CASTREXCosta Rica · Jun 15, 2009#11
This is probably the same Greddy kit offered in the US for the fist gen xB.

Giupo is your car a firts gen or second gen Yaris?



This would make a difference on the fitment of the parts (piping and downpipe)


But even if there were some modifications to be made... these would be a good options for those members looking for boost.
cruz-gsrAshland Mass · Jun 15, 2009#12
can we see pictures with the kit install on the car
GiupoThread starterItaly · Jun 15, 2009#13
for Castrex:

yes, my Yaris is first gen but with some modification to be made in second gen
CASTREXCosta Rica · Jun 15, 2009#14
OK thanks GIUPO.


If you are going to try selling that KIT over here where (99% of the members) drive a 2gen Yaris, you should be pretty clear about that.


There are 2 main differences I can think of. The Throttle body placement is different. That means a modification on the piping. No big deal imo.

A little more significant modification would have to be done to the downpipe in order to mate it to the exhaust...

The aligment between 1st and 2nd gen Yaris is different...


Still a good option for some one who don't care about the modifications...
CASTREXCosta Rica · Jun 15, 2009#15
Also, did you ran this as a stage 0 (no intercooler) in your car or did you ad the optional greddy intercooler? or another generic Intercooler?


Did you dyno tested @ 0,5 bar? Possible buyers would be interested in how much power did this kit put out.
Danish YarisCopenhagen, Denmark · Jun 16, 2009#16
Hi

Would it fit for the 1,3 87hp Toyota Yaris from 2007, I know you say it´s the first model Toyota Yaris it has been installed in.

Regards Steven.
GiupoThread starterItaly · Jun 16, 2009#17
my kit fitted at 1NZFE and 2NZFE engine
CASTREXCosta Rica · Jun 16, 2009#18
Originally Posted by Giupo ↑
my kit fitted at 1NZFE and 2NZFE engine
^^^
Again... that is not an accurate statement.

The manifold would fit a 1NZ adn 2NZ engine. The piping and downpipe could require some level of modifications depending on the model and year of the car.