msfire671Original post671 · Jun 13, 2009#1Well gents....i've been looking for posts on painting eyelids..i dont know if I'm searching right 😳...but all I get are things related to the eyelids😕...question is...
what paint is recommended for it...and for that shiny finish...
how many grits for sanding...
and is there a d.i.y for this?
i want to get my materials ready for the arrival of my 'lids..
please point me in the right direction if possible..
thank you! 😁
Replies 9
TamagoOff Grid · Jun 13, 2009#2what color is your car?
since it's a cosmetic piece, why not give them to a bodyshop to spray for you?
msfire671Thread starter671 · Jun 13, 2009#3oh my bad...polar white!
well i wanted to d.i.m...probably save me some money.
TamagoOff Grid · Jun 13, 2009#4agreed, it will save you money, but there is no DIY match for polar white. i myself have tried to colormatch for my PW car and it did not turn out well.
if you do decide to do it yourself,
www.expresspaint.com may do the job.
bladesmith6PA · Jun 13, 2009#5sand them with 320 to 400 grit, two light coats of adhesion promoter, two light coats of primer, two light coats of color, two coats of clear. Let them cure for about five days and if there is some "orange peel" take some compound for removing fine scratches and buff lightly. color match is always tricky, but it's worth a shot.
msfire671Thread starter671 · Jun 13, 2009#6thanks for the info guys! would home depot have this or should i just go to a paint shop?
TamagoOff Grid · Jun 13, 2009#7 Originally Posted by
msfire671 ↑ thanks for the info guys! would home depot have this or should i just go to a paint shop?
home depot no
bladesmith6PA · Jun 13, 2009#8you will have to get the paint either from a touch up place online(see above) or a local paint shop that can put the paint in an aerosol can, make sure the primer, paint and clearcoat are all of the same type from the same place.
PHXDEMONPhoenix, AZ · Jun 15, 2009#9As bladesmith stated. Go to an actual auto paint store and get some pw paint mixed.
msfire671Thread starter671 · Jun 15, 2009#10yah...i'll do that instead! thanks for the replies fellas!